8083476 Festo Electric Actuators

8083476 Product Details

• Degree of protection
  IP40
• Logic input specification
  Based on IEC 61131-2, type 1
• Permissible voltage fluctuations
  +/- 15 %
• Display
  LED
• Logic interface, connection type
  Plug
• Number of digital logic inputs
  2
• Guide value for payload, vertical
  5 kg
• DC nominal voltage
  24 V
• KC characters
  KC EMC
• Relative air humidity
  0 - 90 %
• Switching logic at outputs
  PNP (positive switching)
• Ready status indication
  LED
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Number of digital logic outputs 24 V DC
  2
• Work range of logic input
  24 V
• Max. current consumption
  3000 mA
• IO-Link®, process data content IN
  1 bit (state device) 1 bit (state out)
• Protection class
  III
• IO-Link®, Connection technology
  Plug
• Stroke reserve
  0 mm
Design
Electromechanical linear axis With integrated drive
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Max. speed
0.25 m/s
Certification
RCM compliance mark
Max. force Fz
600 N
Max. torque Mx
5.5 Nm
Mx with theoretical service life of 100 km (from a guide perspective only)
20 Nm
Moving mass
220 g
Material of end caps
Die cast aluminum, painted
Cover strip material
High-alloy stainless steel
Max. cable length
15 m outputs 20 m for IO-Link® operation
Homing
Fixed stop block positive Fixed stop block, negative
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Position sensing
Motor encoder For proximity sensor
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Power supply, type of connection
Plug
Power supply, number of pins/wires
4
IO-Link®, minimum cycle time
1 ms
IO-Link®, communication mode
COM3 (230.4 kBd)
Working stroke
800 mm
IO-Link®, data memory required
500 byte
Mounting position
Any
Symbol
00997292
Max. acceleration
5 m/s²
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
2nd moment of area Iy
140000 mm⁴
My with theoretical service life of 100 km (from a guide perspective only)
17 Nm
Product weight
4234 g
Slide carriage material
Steel
Spindle material
Steel
Insulation protection class
B
Rotor position sensor
Absolute encoder, single-turn
Rotor position sensor measuring principle
Magnetic
Characteristics of logic input
Configurable Not galvanically isolated
Logic interface, connection pattern
00992264
Guide value for payload, horizontal
10 kg
Storage temperature
-20 °C ... 60 °C
IO-Link®, SIO mode support
Yes
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, port class
A
Spindle pitch
10 mm/U
Spindle type
Ball screw drive
2nd moment of area Iz
170000 mm⁴
Max. torque My
4.7 Nm
Torsion moment of inertia It
8500 mm⁴
Dynamic deflection (load moved)
0.05% of axis length, maximum 0.5 mm
Slide material
Die-cast aluminum
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Parameterization interface
IO-Link® User interface
Input switching logic
PNP (positive switching)
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Power supply, connection pattern
00995989
Max. current of digital logic outputs
100 mA
Logic interface, number of poles/wires
8
Nominal current
3 A
IO-Link®, process data width IN
2 Byte
IO-Link®, number of ports
1
Size
45
Type code
ELGS
Motor type
Stepper motor
Additional functions
User interface Integrated end-position sensing
Duty cycle
100%
Ambient temperature
0 °C ... 50 °C
Fy with theoretical service life of 100 km (from a guide perspective only)
1104 N
Mz with theoretical service life of 100 km (from a guide perspective only)
17 Nm
Feed constant
10 mm/U
Static deflection (load at standstill)
0.1 % of axis length
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Guide rail material
Steel
Rotor position sensor resolution
16 bit
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, process data width OUT
2 Byte
IO-Link®, protocol version
Device V 1.1
Screw diameter
10 mm
Guide
Recirculating ball bearing guide
Repetition accuracy
±0.015 mm
Max. force Fy
300 N
Fz with theoretical service life of 100 km (from a guide perspective only)
2208 N
Max. torque Mz
4.7 Nm
Max. feed force Fx
100 N
Profile material
Wrought aluminum alloy, anodized
Drive cover material
Die cast aluminum, painted
Spindle nut material
Steel

Product condition

Related documents 8083476 Specs