8083475 Festo Electric Actuators

Product Details

• Rotor position sensor
  Absolute encoder, single-turn
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Permissible voltage fluctuations
  +/- 15 %
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Number of digital logic inputs
  2
• Storage temperature
  -20 °C ... 60 °C
• IO-Link®, process data width IN
  2 Byte
• IO-Link®, service data contents IN
  32 bit force 32 bit speed
• IO-Link®, port class
  A
• Size
  45
• Spindle pitch
  10 mm/U
• KC characters
  KC EMC
• Insulation protection class
  B
• Parameterization interface
  IO-Link® User interface
• Position sensing
  Motor encoder For proximity sensor
• Characteristics of logic input
  Configurable Not galvanically isolated
• Logic input specification
  Based on IEC 61131-2, type 1
• Relative air humidity
  0 - 90 %
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
Logic interface, connection type
Plug
Power supply, connection pattern
00995989
Number of digital logic outputs 24 V DC
2
Guide value for payload, vertical
5 kg
Logic interface, number of poles/wires
8
IO-Link®, minimum cycle time
1 ms
IO-Link®, SIO mode support
Yes
IO-Link®, protocol version
Device V 1.1
IO-Link®, Connection technology
Plug
Mounting position
Any
Symbol
00997292
Repetition accuracy
±0.015 mm
Max. force Fz
600 N
Max. torque Mx
5.5 Nm
Mx with theoretical service life of 100 km (from a guide perspective only)
20 Nm
Moving mass
220 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Spindle nut material
Steel
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Homing
Fixed stop block positive Fixed stop block, negative
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Input switching logic
PNP (positive switching)
Switching logic at outputs
PNP (positive switching)
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Max. current of digital logic outputs
100 mA
DC nominal voltage
24 V
Nominal current
3 A
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Protection class
III
IO-Link®, process data width OUT
2 Byte
Screw diameter
10 mm
Design
Electromechanical linear axis With integrated drive
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Duty cycle
100%
2nd moment of area Iy
140000 mm⁴
Mz with theoretical service life of 100 km (from a guide perspective only)
17 Nm
Feed constant
10 mm/U
Material of end caps
Die cast aluminum, painted
Guide rail material
Steel
Rotor position sensor measuring principle
Magnetic
Display
LED
Ready status indication
LED
Logic interface, connection pattern
00992264
Guide value for payload, horizontal
10 kg
Max. current consumption
3000 mA
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, number of ports
1
Working stroke
600 mm
Type code
ELGS
Motor type
Stepper motor
Additional functions
User interface Integrated end-position sensing
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Certification
RCM compliance mark
Max. torque My
4.7 Nm
Torsion moment of inertia It
8500 mm⁴
Max. feed force Fx
100 N
Dynamic deflection (load moved)
0.05% of axis length, maximum 0.5 mm
Cover strip material
High-alloy stainless steel
Power supply, type of connection
Plug
Power supply, number of pins/wires
4
Work range of logic input
24 V
Rotor position sensor resolution
16 bit
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, data memory required
500 byte
Stroke reserve
0 mm
Guide
Recirculating ball bearing guide
Max. speed
0.25 m/s
Ambient temperature
0 °C ... 50 °C
Max. force Fy
300 N
Fz with theoretical service life of 100 km (from a guide perspective only)
2208 N
My with theoretical service life of 100 km (from a guide perspective only)
17 Nm
Static deflection (load at standstill)
0.1 % of axis length
Drive cover material
Die cast aluminum, painted
Spindle material
Steel
Spindle type
Ball screw drive
Max. acceleration
5 m/s²
Degree of protection
IP40
2nd moment of area Iz
170000 mm⁴
Fy with theoretical service life of 100 km (from a guide perspective only)
1104 N
Max. torque Mz
4.7 Nm
Product weight
3514 g
Profile material
Wrought aluminum alloy, anodized
Slide carriage material
Steel
Slide material
Die-cast aluminum

Related documents 8083475 Specs