8083470 Festo Electric Actuators

8083470 Product Details

• Insulation protection class
  B
• Permissible voltage fluctuations
  +/- 15 %
• Position sensing
  Motor encoder For proximity sensor
• Ready status indication
  LED
• Logic interface, connection pattern
  00992264
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Relative air humidity
  0 - 90 %
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Parameterization interface
  IO-Link® User interface
• Input switching logic
  PNP (positive switching)
• Characteristics of logic input
  Configurable Not galvanically isolated
• Power supply, connection pattern
  00995989
• Storage temperature
  -20 °C ... 60 °C
• IO-Link®, minimum cycle time
  1 ms
• Protection class
  III
• Size
  45
• Type code
  ELGS
• Motor type
  Stepper motor
• Additional functions
  User interface Integrated end-position sensing
Repetition accuracy
±0.015 mm
Ambient temperature
0 °C ... 50 °C
2nd moment of area Iz
170000 mm⁴
Fy with theoretical service life of 100 km (from a guide perspective only)
1104 N
Mz with theoretical service life of 100 km (from a guide perspective only)
17 Nm
Static deflection (load at standstill)
0.1 % of axis length
Slide carriage material
Steel
Spindle nut material
Steel
Logic input specification
Based on IEC 61131-2, type 1
Max. cable length
15 m outputs 20 m for IO-Link® operation
Homing
Fixed stop block positive Fixed stop block, negative
Rotor position sensor measuring principle
Magnetic
Switching logic at outputs
PNP (positive switching)
Logic interface, connection type
Plug
Power supply, type of connection
Plug
Number of digital logic outputs 24 V DC
2
Guide value for payload, horizontal
10 kg
Rotor position sensor resolution
16 bit
IO-Link®, process data width IN
2 Byte
IO-Link®, SIO mode support
Yes
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, protocol version
Device V 1.1
Mounting position
Any
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Max. force Fy
300 N
Max. torque Mx
5.5 Nm
Max. feed force Fx
100 N
Product weight
1714 g
KC characters
KC EMC
Rotor position sensor
Absolute encoder, single-turn
Display
LED
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Number of digital logic inputs
2
Logic interface, number of poles/wires
8
Work range of logic input
24 V
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, process data width OUT
2 Byte
IO-Link®, Connection technology
Plug
Stroke reserve
0 mm
Design
Electromechanical linear axis With integrated drive
Symbol
00997292
Max. acceleration
5 m/s²
Duty cycle
100%
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Guide value for payload, vertical
5 kg
Max. current of digital logic outputs
100 mA
Max. current consumption
3000 mA
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, number of ports
1
IO-Link®, data memory required
500 byte
Screw diameter
10 mm
Spindle type
Ball screw drive
Degree of protection
IP40
Power supply, number of pins/wires
4
DC nominal voltage
24 V
Nominal current
3 A
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, port class
A
Working stroke
100 mm
Spindle pitch
10 mm/U
Guide
Recirculating ball bearing guide
Max. speed
0.25 m/s
Max. force Fz
600 N
Max. torque My
4.7 Nm
Max. torque Mz
4.7 Nm
Moving mass
220 g
Profile material
Wrought aluminum alloy, anodized
Spindle material
Steel
2nd moment of area Iy
140000 mm⁴
Mx with theoretical service life of 100 km (from a guide perspective only)
20 Nm
Torsion moment of inertia It
8500 mm⁴
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Guide rail material
Steel
Certification
RCM compliance mark
Fz with theoretical service life of 100 km (from a guide perspective only)
2208 N
My with theoretical service life of 100 km (from a guide perspective only)
17 Nm
Feed constant
10 mm/U
Material of end caps
Die cast aluminum, painted
Cover strip material
High-alloy stainless steel
Drive cover material
Die cast aluminum, painted
Dynamic deflection (load moved)
0.05% of axis length, maximum 0.5 mm
Slide material
Die-cast aluminum

Product condition

Related documents 8083470 Specs