8083430 Festo Electric Actuators

8083430 Product Details

• Homing
  Fixed stop block positive Fixed stop block, negative
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Logic interface, connection pattern
  00992264
• Number of digital logic inputs
  2
• DC nominal voltage
  24 V
• Max. current consumption
  3000 mA
• IO-Link®, process data content IN
  1 bit (state device) 1 bit (state out)
• Protection class
  III
• Working stroke
  800 mm
• Screw diameter
  8 mm
• Additional functions
  User interface Integrated end-position sensing
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Max. force Fy
  150 N
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Relative air humidity
  0 - 90 %
• Permissible voltage fluctuations
  +/- 15 %
• Rotor position sensor measuring principle
  Magnetic
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Logic interface, connection type
  Plug
• Guide value for payload, vertical
  2 kg
Max. current of digital logic outputs
100 mA
Rotor position sensor resolution
16 bit
IO-Link®, minimum cycle time
1 ms
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, port class
A
Stroke reserve
0 mm
Mounting position
Any
Motor type
Stepper motor
Max. acceleration
5 m/s²
Max. speed
0.18 m/s
Max. force Fz
300 N
Fz with theoretical service life of 100 km (from a guide perspective only)
1104 N
My with theoretical service life of 100 km (from a guide perspective only)
4 Nm
Max. feed force Fx
40 N
Material of end caps
Die cast aluminum, painted
Slide carriage material
Steel
Slide material
Die-cast aluminum
KC characters
KC EMC
Insulation protection class
B
Rotor position sensor
Absolute encoder, single-turn
Input switching logic
PNP (positive switching)
Display
LED
Characteristics of logic input
Configurable Not galvanically isolated
Power supply, type of connection
Plug
Logic interface, number of poles/wires
8
Nominal current
3 A
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, protocol version
Device V 1.1
IO-Link®, data memory required
500 byte
Spindle pitch
8 mm/U
Guide
Recirculating ball bearing guide
Spindle type
Ball screw drive
Duty cycle
100%
Ambient temperature
0 °C ... 50 °C
Certification
RCM compliance mark
Fy with theoretical service life of 100 km (from a guide perspective only)
552 N
Max. torque Mz
1.1 Nm
Mz with theoretical service life of 100 km (from a guide perspective only)
4 Nm
Moving mass
83.4 g
Static deflection (load at standstill)
0.1 % of axis length
Cover strip material
High-alloy stainless steel
Spindle nut material
Steel
Logic input specification
Based on IEC 61131-2, type 1
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Ready status indication
LED
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Power supply, connection pattern
00995989
Guide value for payload, horizontal
2 kg
Work range of logic input
24 V
IO-Link®, process data width IN
2 Byte
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, number of ports
1
Type code
ELGS
Design
Electromechanical linear axis With integrated drive
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Degree of protection
IP40
2nd moment of area Iy
38000 mm⁴
Max. torque My
1.1 Nm
Torsion moment of inertia It
1700 mm⁴
Product weight
2329 g
Profile material
Wrought aluminum alloy, anodized
Spindle material
Steel
Max. cable length
15 m outputs 20 m for IO-Link® operation
Parameterization interface
IO-Link® User interface
Position sensing
Motor encoder For proximity sensor
Switching logic at outputs
PNP (positive switching)
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Number of digital logic outputs 24 V DC
2
Power supply, number of pins/wires
4
Storage temperature
-20 °C ... 60 °C
IO-Link®, SIO mode support
Yes
IO-Link®, process data width OUT
2 Byte
IO-Link®, Connection technology
Plug
Size
32
Symbol
00997292
Repetition accuracy
±0.015 mm
2nd moment of area Iz
45000 mm⁴
Max. torque Mx
1.3 Nm
Feed constant
8 mm/U
Drive cover material
Die cast aluminum, painted
Mx with theoretical service life of 100 km (from a guide perspective only)
5 Nm
Dynamic deflection (load moved)
0.05% of axis length, maximum 0.5 mm
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Guide rail material
Steel

Product condition

Related documents 8083430 Specs