Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

8063369 Festo Manifold Dispensers

Festo 8063369 dispense head VTOE-D7-T3-M22C-08-V-S-PC-S Valve function: 2/2 closed, monostable, Operating pressure MPa: 0 - 0,05 MPa, Operating pressure: 0 - 0,5 bar, Operating pressure [psi]: 0 - 7,25 psi, Internal volume: 113 µl valve with fluid connections
Festo

Part#:8063369

Manufacturer:Festo

Alt. Part#:VTOE-D7-T3-M22C-08-V-S-PC-S

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: dispense head VTOE-D7-T3-M22C-08-V-S-PC-S Valve function: 2/2 closed, monostable, Operating pressure MPa: 0 - 0,05 MPa, Operating pressure: 0 - 0,5 bar, Operating pressure [psi]: 0 - 7,25 psi, Internal volume: 113 µl valve with fluid connections

About the manufacturer: For more than 40 years in the United States and 80 years globally, Festo Corp. has been a positive force for manufacturers. The company's passion is automation & intelligent automation solutions that transform the way people work and the way companies com

Check out the 8063369 Festo price in the box on the right side or send a quick quote.

8063369 Product Details

  • Switching time off
    2 ms
  • On switching time
    7 ms
  • Storage temperature
    -20 °C ... 70 °C
  • Note on dosing volume
    Depending on the configuration, environment and application
  • Note on switching frequency
    Dependent on the ambient temperature and installation state
  • Note on switching time off
    Depending on the configuration, environment and application
  • Mounting position
    Any
  • Wire ends
    Stripped
  • Nominal width of dosing needle
    0.32 mm
  • Relative air humidity
    0 - 95 % Non-condensing
  • Contamination level
    2
  • Electrical power consumption
    1.8 W
  • Type of control
    Direct
  • Degree of protection
    IP30
  • Materials in contact with the media
    ETFE High-alloy stainless steel
  • Material number for dosing needle
    1.4301
  • Product weight
    18 g
  • Operating pressure
    0 bar ... 0.5 bar
  • Information on medium
    Observe resistance of materials that come into contact with media
  • Length of dosing needle
    30 mm
  • Reset method
    Mechanical spring
  • Temperature of medium
    5 °C ... 50 °C
  • Note on materials
    Contains paint-wetting impairment substances RoHS-compliant
  • Fluid connector
    UNF1/4-28
  • Note on fluid connector
    Fitting enclosed for pneumatic tubing with 3 mm outside diameter
  • Material of dosing needle
    High-alloy stainless steel
  • Electrical connection
    2-wire Open end
  • Cable length
    0.15 m
  • Internal volume
    113 µl valve with fluid connections
  • Note on dosing precision
    Depending on the configuration, environment and application
  • Typical dosing precision
    <1% CV for volumes >5 µl <2.5% CV for volumes between 1-5 µl
  • Application note
    See application note (available on the support portal at festo.com)
  • Medium
    Liquid media
  • Min. dosing volume
    1 µl
  • Sealing principle
    Soft
  • Nominal operating voltage DC
    24 V
  • Corrosion resistance class (CRC)
    0 - No corrosion stress
  • Ambient temperature
    5 °C ... 40 °C
  • Valve function
    2/2, closed, monostable
  • Type of mounting
    With internal thread and centering sleeve
  • Duty cycle
    100 % with individual mounting 50 % in case of block mounting (max. switch-on time 1 s)
  • Nominal conductor cross section
    AWG28
  • Width dimension
    9 mm
  • Water flow rate at max. operating pressure
    370 µl/s
  • Nominal altitude of use above sea level
    <= 2000 m NHN
  • Note on switching time on
    Depending on the configuration, environment and application
  • Note on degree of protection
    In mounted state
  • Nominal width
    0.8 mm
  • Type code
    VTOE
  • Max. switching frequency
    4 Hz
  • Permissible voltage fluctuations
    +/- 10 %
  • Actuation type
    Electrical
  • Vibration resistance
    Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
  • Shock resistance
    Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.


Related documents 8063369 Specs

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo