5242207 Festo Servo Motors
Part#:5242207
Manufacturer:Festo
Alt. Part#:EMMT-AS-60-M-LS-RMB
Product Lifecycle:Active
Get a quick Quote!
About the product: servo motor EMMT-AS-60-M-LS-RMB Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, Sto
About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5242207 Festo price in the box on the right side or send a quick quote.
5242207 Product Details
- Electrical connection 1, connection technology M23x1
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Motor type as per EN 60034-7 IM B5 IM V3
- Electrical connection 1, connection type Hybrid plug
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Certificate issuing authority UL E342973
- Rotor position encoder for DC operating voltage 5 V
- Brake coil resistance 52.4 Ohm
- Max. brake friction work 5600 J
- Brake separation time ≤ 35 ms
- Thermal resistance 1.3 K/W
- Type code EMMT-AS
- Continuous stall current 2.5 A
- Motor nominal power 310 W
- Motor nominal current 2.2 A
- Rating class according to EN 60034-1 S1
- Thermal class according to EN 60034-1 F
- Interface code, motor out 60P
- Detent torque < 1.0% of peak torque
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Measuring flange 250 x 250 x 15 mm, steel
- Cross inductivity Lq (phase) 8.2 mH
- Standstill torque constant 0.53 Nm/A
- Rotor position sensor interface EnDat® 22
- Nominal rotary speed 3000 1/min
- Motor constants 0.45 Nm/A
- Type of winding switch Star inside
- Storage temperature -20 °C ... 70 °C
- Total output inertia moment 0.373 kgcm²
- Stall torque 1.15 Nm
- MTTF, subcomponent 190 years, rotor position sensor
- Switching cycles, holding brake 10 million idle actuations (without friction work!)
- Rotor position sensor for manufacturer designation EQI 1131
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Balancing quality G 2.5
- Max. brake no-load speed 10000 1/min
- Brake coil inductivity 700 mH
- Max. mechanical speed 16000 1/min
- Brake closing time 10 ms
- DC brake response delay ≤ 2 ms
- Rotor position encoder for absolutely detectable revolutions 4096
- Rotor position encoder for positional values per revolution 524288
- Max. rotational speed 6800 1/min
- Brake power consumption 11 W
- Brake DC operating voltage 24 V
- Phase-phase winding resistance 4.85 Ohm
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Degree of protection IP40
- Brake mass moment of inertia 0.074 kgcm²
- Nominal torque 1 Nm
- MTTFd, subcomponent 380 years, rotor position sensor
- Conforms to standard IEC 60034
- Electrical connection for input 1, connection pattern 00995913
- Mounting position Any
- Contamination level 2
- Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius
- Electrical connection 1, number of pins/wires 15
- Max. installation height 4000 m
- Brake stopping current 0.33 A
- Storage lifetime, under nominal conditions 20000 h
- Winding longitudinal inductivity Ld (phase) 7 mH
- Rotor position encoder system accuracy angle measurement -120 arcsec ... 120 arcsec
- Rotor position sensor Absolute encoder, multi-turn
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Rotor position sensor resolution 19 bit
- Peak current 11 A
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Certification RCM compliance mark c UL us - Recognized (OL)
- Peak torque 3.4 Nm
- Permissible radial shaft load 350 N
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Max. winding temperature 155 °C
- Brake airflow 0.33 A
- Brake current consumption 0.46 A
- Number of pole pairs 5
- Electric time constant 2.7 ms
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Thermal time constant 42 min
- Rotor position sensor measuring principle Inductive
- Nominal operating voltage DC 325 V
- Winding inductance phase-phase 11 mH
- Voltage constant, phase-to-phase 32 mVmin
- Relative air humidity 0 - 90 %
- Ambient temperature -15 °C ... 40 °C
- Brake holding torque 2.5 Nm
- Permissible axial shaft load 70 N
- Product weight 1850 g
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 5242207 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
5242207
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
