5242215 Festo Servo Motors
Part#:5242215
Manufacturer:Festo
Alt. Part#:EMMT-AS-60-L-LS-RMB
Product Lifecycle:Active
Get a quick Quote!
About the product: servo motor EMMT-AS-60-L-LS-RMB Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, Sto
About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5242215 Festo price in the box on the right side or send a quick quote.
5242215 Product Details
- Electrical connection 1, connection technology M23x1
- Electrical connection for input 1, connection pattern 00995913
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Balancing quality G 2.5
- Brake airflow 0.33 A
- Max. mechanical speed 16000 1/min
- Electric time constant 3 ms
- Max. brake friction work 5600 J
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Rotor position encoder for absolutely detectable revolutions 4096
- Rotor position sensor interface EnDat® 22
- Max. rotational speed 6800 1/min
- Motor nominal power 410 W
- Winding inductance phase-phase 7 mH
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Degree of protection IP40
- Certification RCM compliance mark c UL us - Recognized (OL)
- Stall torque 1.56 Nm
- Nominal torque 1.3 Nm
- Detent torque < 1.0% of peak torque
- Rotor position sensor for manufacturer designation EQI 1131
- Contamination level 2
- Certificate issuing authority UL E342973
- Max. brake no-load speed 10000 1/min
- Brake coil inductivity 700 mH
- Brake stopping current 0.33 A
- Brake separation time ≤ 35 ms
- DC brake response delay ≤ 2 ms
- Standstill torque constant 0.52 Nm/A
- Type code EMMT-AS
- Rotor position sensor measuring principle Inductive
- Continuous stall current 3.5 A
- Motor constants 0.44 Nm/A
- Peak current 18.3 A
- Voltage constant, phase-to-phase 31.2 mVmin
- Ambient temperature -15 °C ... 40 °C
- Peak torque 5.6 Nm
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Max. installation height 4000 m
- Brake coil resistance 52.4 Ohm
- Storage lifetime, under nominal conditions 20000 h
- Cross inductivity Lq (phase) 5 mH
- Rotor position encoder system accuracy angle measurement -120 arcsec ... 120 arcsec
- Thermal time constant 44 min
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Brake power consumption 11 W
- Rotor position sensor resolution 19 bit
- Phase-phase winding resistance 2.68 Ohm
- Thermal class according to EN 60034-1 F
- Brake mass moment of inertia 0.074 kgcm²
- MTTF, subcomponent 190 years, rotor position sensor
- Product weight 2230 g
- Electrical connection 1, connection type Hybrid plug
- Mounting position Any
- Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius
- Electrical connection 1, number of pins/wires 15
- Thermal resistance 1.2 K/W
- Rotor position encoder for positional values per revolution 524288
- Nominal rotary speed 3000 1/min
- Nominal operating voltage DC 325 V
- Rating class according to EN 60034-1 S1
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Storage temperature -20 °C ... 70 °C
- Brake holding torque 2.5 Nm
- Permissible radial shaft load 350 N
- Conforms to standard IEC 60034
- Interface code, motor out 60P
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Motor type as per EN 60034-7 IM B5 IM V3
- Measuring flange 250 x 250 x 15 mm, steel
- Max. winding temperature 155 °C
- Rotor position encoder for DC operating voltage 5 V
- Brake current consumption 0.46 A
- Number of pole pairs 5
- Brake closing time 10 ms
- Winding longitudinal inductivity Ld (phase) 4.2 mH
- Rotor position sensor Absolute encoder, multi-turn
- Brake DC operating voltage 24 V
- Motor nominal current 3 A
- Type of winding switch Star inside
- Relative air humidity 0 - 90 %
- Total output inertia moment 0.49 kgcm²
- MTTFd, subcomponent 380 years, rotor position sensor
- Permissible axial shaft load 70 N
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Switching cycles, holding brake 10 million idle actuations (without friction work!)
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 5242215 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
5242215
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
