3929370 Festo Positioners
Part#:3929370
Manufacturer:Festo
Alt. Part#:CMSX-P-S-C-U-F1-S-50-A
Product Lifecycle:Active
Get a quick Quote!
About the product: positioner CMSX-P-S-C-U-F1-S-50-A electropneumatic, for single-acting pneumatic quarter turn actuators, standard nominal flow rate 50 l/min, opening/closing regulating action safety function, 4-wire, power supply 24 VDC, setpoint input 0/4-20 mA, 0-10 V,
About the manufacturer: Festo is one of the manufacturers that offers Positioners that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 3929370 Festo price in the box on the right side or send a quick quote.
3929370 Product Details
- Digital inputs, electrical isolation Yes, optocoupler
- Approved cable diameter 7-13 mm for electrical connection 1
- Display 7-segment With backlighting
- Electrical connection 1, connection type Terminal strip
- Digital outputs, potential separation Yes, optocoupler
- Analog inputs, linearity error at 25°C 0.5%
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27 as per EN 60068-2-29
- Analog outputs, signal range 4 - 20 mA
- Analog outputs, temperature coefficient < 0.02 %FS/K
- Electrical connection 1, conductor cross section < 1.5 mm²
- Electrical connection 1, number of pins/wires 14
- Operating pressure 3 bar ... 8 bar
- Certification RCM compliance mark
- Ambient temperature -5 °C ... 60 °C
- Cable fitting M20 x 1.5 for electrical connection 1
- Seals material NBR
- Material of screws High-alloy stainless steel
- Shaft material High-alloy stainless steel
- Quick-coupling material High-alloy stainless steel
- Blanking plug material PA
- Analog outputs, reverse polarity protection yes
- Inspection window material PC
- Analog outputs, overload protection yes
- Electrical connection 1, function 2x digital input Load power supply
- Design features Safety position – pneumatic outlet 4 exhausted
- Sensing range 0 deg ... 100 deg
- Measuring principle of linear potentiometer Potentiometer
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Product weight 970 g
- Housing material PC-reinforced
- Analog outputs, resolution 12 bit
- Digital outputs, output current 100 mA
- Analog outputs, galvanic isolation no
- Analog inputs, signal range 0 - 10 V 4 - 20 mA
- Switching output 3 x PNP or 3 x NPN switchable
- Analog outputs, short-circuit protection yes
- Dimensions W x L x H 190 mm x 105 mm x 130 mm
- Digital outputs, overload protection yes
- Nominal operating voltage DC 24 V
- Setting options Via display and pushbuttons
- Degree of protection IP65
- Standard nominal flow rate 50 l/min
- Storage temperature -20 °C ... 60 °C
- Analog inputs, resolution 16 bit
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 as per EN 60068-2-6
- Switching input PNP NPN
- Mounting position Any
- Digital outputs, short circuit current rating yes
- Electrical connection 1, connection technology Screw terminal
- Analog outputs, linearity error at 25°C 0.5%
- Design digital, electropneumatic positioner
- Base plate material Wrought aluminum alloy Anodized
- Electrical connection 1, tightening torque 0.6 Nm
- Analog outputs, max. load resistance ≤ 600 Ohm
- Type code CMSX
- DC operating voltage range 21.6 V ... 26.4 V
- Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
- Pneumatic connection G1/8
- Analog inputs, overload protection yes
- Analog inputs, galvanic isolation no
- Contamination level 3
- Relative air humidity 93 %
- Mode of operation Single-acting
- Max. cable length 30 m for electrical connection 1
- Digital outputs, reverse polarity protection yes
- Digital inputs, reverse polarity protection yes
- Input characteristics As per IEC 61131-2, type 3
- Analog inputs, temperature coefficient < 0.02 %FS/K
- Max. current consumption 600 mA
- Reverse polarity protection for operating voltage connections
- Size of dead space 0.5 % ... 10 %
- Information on operating and pilot media Operation with oil lubrication not possible
- Type of mounting With accessories
- Note on materials RoHS-compliant
- Material for cable connector PA
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 3929370 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
3929370
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨