Nikki Gonzales
Nick Goetz
Bryan Obida

We are online

Monday - Friday 6AM - 6PM PST

3929315 Festo Positioners

Festo 3929315 positioner CMSX-P-S-C-U-F1-D-50-C electropneumatic, for double-acting pneumatic quarter turn actuators, standard nominal flow rate 50 l/min, holding regulating action safety function, 4-wire, power supply 24 VDC, setpoint input 0/4-20 mA, 0-10 V, position
Festo

Part#:3929315

Manufacturer:Festo

Alt. Part#:CMSX-P-S-C-U-F1-D-50-C

Product Lifecycle:Active

Get a quick Quote!

About the product: positioner CMSX-P-S-C-U-F1-D-50-C electropneumatic, for double-acting pneumatic quarter turn actuators, standard nominal flow rate 50 l/min, holding regulating action safety function, 4-wire, power supply 24 VDC, setpoint input 0/4-20 mA, 0-10 V, position

About the manufacturer: Festo is one of the manufacturers that offers Positioners that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 3929315 Festo price in the box on the right side or send a quick quote.

3929315 Product Details

  • Analog inputs, galvanic isolation
    no
  • Quick-coupling material
    High-alloy stainless steel
  • Display
    7-segment With backlighting
  • Mounting position
    Any
  • Analog inputs, signal range
    0 - 10 V 4 - 20 mA
  • Analog outputs, reverse polarity protection
    yes
  • Electrical connection 1, function
    2x digital input Load power supply
  • Digital inputs, reverse polarity protection
    yes
  • Analog outputs, max. load resistance
    ≤ 600 Ohm
  • Max. current consumption
    600 mA
  • Analog outputs, resolution
    12 bit
  • Digital outputs, output current
    100 mA
  • Contamination level
    3
  • Electrical connection 1, connection type
    Terminal strip
  • Switching output
    3 x PNP or 3 x NPN switchable
  • Inspection window material
    PC
  • Digital outputs, reverse polarity protection
    yes
  • Design
    digital, electropneumatic positioner
  • Base plate material
    Wrought aluminum alloy Anodized
  • Analog outputs, temperature coefficient
    < 0.02 %FS/K
  • Electrical connection 1, number of pins/wires
    14
  • Setting options
    Via display and pushbuttons
  • Certification
    RCM compliance mark
  • Cable fitting
    M20 x 1.5 for electrical connection 1
  • Pneumatic connection
    G1/8
  • Shaft material
    High-alloy stainless steel
  • Analog inputs, resolution
    16 bit
  • Switching input
    PNP NPN
  • Mode of operation
    Double-acting
  • Analog outputs, short-circuit protection
    yes
  • Analog inputs, linearity error at 25°C
    0.5%
  • Analog outputs, signal range
    4 - 20 mA
  • Design features
    Safety position - pneumatic outlets closed
  • Electrical connection 1, tightening torque
    0.6 Nm
  • Electrical connection 1, conductor cross section
    < 1.5 mm²
  • Measuring principle of linear potentiometer
    Potentiometer
  • Information on operating and pilot media
    Operation with oil lubrication not possible
  • CE marking (see declaration of conformity)
    As per EU EMC directive As per EU RoHS directive
  • Seals material
    NBR
  • Material of screws
    High-alloy stainless steel
  • Analog inputs, overload protection
    yes
  • Vibration resistance
    Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 as per EN 60068-2-6
  • Analog outputs, galvanic isolation
    no
  • Blanking plug material
    PA
  • Digital outputs, short circuit current rating
    yes
  • Max. cable length
    30 m for electrical connection 1
  • Analog outputs, linearity error at 25°C
    0.5%
  • Shock resistance
    Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27 as per EN 60068-2-29
  • Input characteristics
    As per IEC 61131-2, type 3
  • Reverse polarity protection
    for operating voltage connections
  • Operating pressure
    3 bar ... 8 bar
  • Degree of protection
    IP65
  • Product weight
    970 g
  • Note on materials
    RoHS-compliant
  • Housing material
    PC-reinforced
  • Digital inputs, electrical isolation
    Yes, optocoupler
  • Approved cable diameter
    7-13 mm for electrical connection 1
  • Relative air humidity
    93 %
  • Digital outputs, potential separation
    Yes, optocoupler
  • Electrical connection 1, connection technology
    Screw terminal
  • Analog outputs, overload protection
    yes
  • Dimensions W x L x H
    190 mm x 105 mm x 130 mm
  • Digital outputs, overload protection
    yes
  • Analog inputs, temperature coefficient
    < 0.02 %FS/K
  • Nominal operating voltage DC
    24 V
  • Type code
    CMSX
  • Size of dead space
    0.5 % ... 10 %
  • Type of mounting
    With accessories
  • Material for cable connector
    PA
  • Storage temperature
    -20 °C ... 60 °C
  • DC operating voltage range
    21.6 V ... 26.4 V
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:4:4]
  • Ambient temperature
    -5 °C ... 60 °C
  • Standard nominal flow rate
    50 l/min

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.


Related documents 3929315 Specs

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

3929315

Select Qty:

Average response time: 11 minutes

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo