LTF24UC2LD W/30 Banner Electronic Components

LTF24UC2LD W/30 Product Details

• PROFINET
  No
• SSI
  No
• IO Link
  No
• RS-232
  No
• 1-wire Serial Interface
  No
• Profibus
  No
• RS-485
  No
• Wireless
  No
• Feature: Health/ Marginal Signal Output
  Yes
• Common Ethernet Protocol
  No
• RS-422
  No
• Typical Laser Lifetime (Hours)
  60000
• Supply Protection Circuitry
  Protected against reverse polarity and transient overvoltages
• Feature: Timing (Hold/Delay)
  Yes
• Feature: Pump-in/ Pump-out
  Yes
• Feature: Chemical Resistant
  No
• Power/Current Consumption (exclusive of load)
  <85 mA @ 24 V (< 2.1 W)
• Max Off-state Leakage Current (µA)
  PNP <10µA at 30V, NPN <200µa at 30V
• Feature: Remote Teach
  Yes
• Discrete Output Hysteresis (mm)
  Automatically adjusted or manually settable from 2 to 23950 mm
Max Ambient Light (Lux)
40000
Alarm Output (mA)
100
Laser Control
Yes
Minimum Response Time (ms)
1.5
Spot Size (@ Reference Distance)
6.5 mm at 50 mm, 12.5 mm at 12000 mm, 35 mm at 24000 mm
Analog Linearity (mm)
+/- 10
Minimum Window Size (mm)
10
Max Operating Temperature (°C)
55
Min Operating Temperature (°C)
-20
Warm-up Time (minutes)
15
Window Material
Acrylic
Storage Temperature (°C)
-30 to 65
Max Op. Relative Humidity Non-Condensing (%)
90 at 55°C
Discrete (Switched) Outputs
1 NPN/PNP Configurable
Output Saturation Voltage PNP Outputs
< 3V @ 100ma
Max Discrete (Switched) Output (mA)
100
Analog Voltage Output Rating
2.5 kΩ min. load impedance
NEMA Rating
NEMA 6
IP Rating
IP67
Output Protection
Protected against continuous overload and short circuit
Mechanical Shock
IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
Output Saturation Voltage NPN Outputs
< 1.6V @ 100ma
Vibration
MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
Number of Pins
5
Temperature Effect (mm/°C)
0.25mm/C (typical)
Adjustments
Push Button; Remote Teach
Sensing Beam Wavelength (nm)
660
Delay at Power-up (ms)
2000
Minimum Sensing Distance (mm)
50
Power Supply
12-30 V dc
Max Sensing Distance (mm)
24000
Analog Output Configuration
0-10 V dc
Analog Resolution/Discrete Repeatability
1
Quick Disconnect Type
No QD
Connection
Flying Leads
Indicator
Display; LED(s)
Laser Classification
Class 2
Input/Output
Analog & Discrete
Primary Housing Material
Zinc Alloy Die-Cast
Device Type
Sensor
Housing Style
Rectangular
Sensing Mode (Detailed)
Time of Flight
PC Configurable
No
Sensing Mode (General)
Proximity
Cable Length (m)
9
Power
DC
Max Measurement Range
>20 m
Sensing Beam
Visible Red Laser

Product condition

Related documents LTF24UC2LD W/30 Specs