X20AO4632 B&R Electronic Components

X20AO4632 Product Details

• Max. error Voltage Gain
  0.04%
• Temperature Operation Vertical mounting orientation
  -25 to 50°C (Rev. ≥ J0), 0 to 50°C (Rev. < J0)
• Relative humidity Storage
  5 to 95%, non-condensing
• Temperature Operation Horizontal mounting orientation
  -25 to 60°C (Rev. ≥ J0), 0 to 55°C (Rev. < J0)
• Max. error Current Offset
  0.045%
• Relative humidity Transport
  5 to 95%, non-condensing
• Max. error Current Gain
  0.09%
• Max. error Voltage Offset
  0.022%
• Relative humidity Operation
  5 to 95%, non-condensing
• Temperature Transport
  -40 to 85°C
• Short-circuit proof
  Current limiting ±40 mA
• Temperature Storage
  -40 to 85°C
• Temperature Derating
  See section "Derating".
• Installation elevation above sea level 0 to 2000 m
  No limitation
• Mounting orientation Horizontal
  Yes
• Mounting orientation Vertical
  Yes
• Installation elevation above sea level >2000 m
  Reduction of ambient temperature by 0.5°C per 100 m
• Output protection
  Short-circuit proof
• Switch on/off behavior
  Internal enable relay for startup
• Error caused by load change Voltage
  Max. 0.11%, from 10 MΩ → 1 kΩ, resistive
Max. offset drift Current
0.012%/°C
Error caused by load change Current
Max. 0.5%, from 1 Ω → 600 Ω, resistive
Max. offset drift Voltage
0.012%/°C
Conversion time
50 µs for all outputs
Max. gain drift Voltage
0.01%/°C
Settling time on output change over entire range
500 µs
Max. gain drift Current
0.02 %/°C
Load per channel Current
Load max. 600 Ω (Rev. ≥ J0), 500 Ω (Rev. < J0)
Output format Voltage
INT 0x8001 - 0x7FFF / 1 LSB = 0x0001 = 305.176 µV
Output format Current
INT 0x0000 - 0x7FFF / 1 LSB = 0x0001 = 610.352 nA
Load per channel Voltage
Max. ±10 mA, load ≥1 kΩ
Digital converter resolution Current
15-bit
Digital converter resolution Voltage
±15-bit
Certifications KR
Yes
Certifications KC
Yes
Certifications LR
ENV1
Certifications HazLoc
cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
Certifications ABS
Yes
Certifications EAC
Yes
Certifications ATEX
Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
Certifications UL
cULus E115267; Industrial control equipment
Certifications DNV
Temperature: B (0 - 55°C); Humidity: B (up to 100%); Vibration: B (4 g); EMC: B (bridge and open deck)
Certifications UKCA
Yes
Note
Order 1x terminal block X20TB12 separately.; Order 1x bus module X20BM11 separately.
Power consumption Internal I/O
1.8 W (Rev. ≥ J0), 2.2 W (Rev. < J0)
Certifications CE
Yes
Diagnostics Module run/error
Yes, using LED status indicator and software
Power consumption Bus
0.01 W
Nonlinearity
<0.007%
Pitch
12.5+0.2 mm
Diagnostics Channel type
Yes, using software
Insulation voltage between channel and bus
500 Veff
Output filter
First-order low-pass filter / cutoff frequency 10 kHz
Electrical isolation
Channel isolated from bus; Channel not isolated from channel
Degree of protection per EN 60529
IP20
I/O module
4 analog outputs ±10 V or 0 to 20 mA
Output
±10 V or 0 to 20 mA, via different terminal connections
Status indicators
I/O function per channel, operating state, module status
B&R ID code
0x1BA5

Product condition

Related documents X20AO4632 Specs