X20AT6402 B&R Electronic Components

X20AT6402 Product Details

• Max. error at 25°C Offset Type R: PtRh13-Pt
  0.09%
• Temperature Operation Vertical mounting orientation
  0 to 50°C
• Temperature Operation Horizontal mounting orientation
  0 to 55°C
• Max. error at 25°C Offset Type B: PtRh30-PtRh6
  0.13%
• Max. error at 25°C Offset Type S: PtRh10-Pt
  0.11%
• Max. error at 25°C Offset Type N (Rev. ≥D0)
  0.05%
• Max. error at 25°C Offset Type K: NiCr-Ni
  0.05%
• Measurement range Sensor temperature Type R: PtRh13-Pt
  -50 to 1664°C
• Measurement range Sensor temperature Type S: PtRh10-Pt
  -50 to 1768°C
• Measurement range Sensor temperature Type B: PtRh30-PtRh6
  0 to 1820°C
• Max. error at 25°C Offset Type T: Cu-CuNi
  0.04%
• Measurement range Sensor temperature Type N: NiCrSi-NiSi
  -270 to 1300°C (Rev. ≥D0)
• Measurement range Sensor temperature Type K: NiCr-Ni
  -270 to 1372°C
• Measurement range Sensor temperature Type J: Fe-CuNi
  -210 to 1200°C
• Relative humidity Transport
  5 to 95%, non-condensing
• Relative humidity Storage
  5 to 95%, non-condensing
• Relative humidity Operation
  5 to 95%, non-condensing
• Temperature Transport
  -40 to 85°C
• Temperature Storage
  -40 to 85°C
• Installation elevation above sea level 0 to 2000 m
  No limitation
Temperature Derating
-
Installation elevation above sea level >2000 m
Reduction of ambient temperature by 0.5°C per 100 m
Mounting orientation Vertical
Yes
Terminal temperature compensation precision With natural convection
±2°C after 10 min
Mounting orientation Horizontal
Yes
Terminal temperature compensation precision With artificial convection
±4°C after 10 min
Insulation voltage Between channel and bus
500 Veff
Common-mode rejection 50 Hz
>70 dB
Common-mode rejection DC
>70 dB
Max. offset drift Type R: PtRh13-Pt
0.0074 %/°C
Max. offset drift Type B: PtRh30-PtRh6
0.0114 %/°C
Max. offset drift Type N (Rev. ≥D0)
0.0029 %/°C
Max. offset drift Type S: PtRh10-Pt
0.0079 %/°C
Max. offset drift Type K: NiCr-Ni
0.0024% / °C
Monitoring General fault
0x8000
Max. offset drift Type J: Fe-CuNi
0.0019 %/°C
Max. error at 25°C Gain
0.06%
Monitoring Open inputs
0x7FFF
Monitoring Range overshoot
0x7FFF
Monitoring Open circuit
0x7FFF
Monitoring Range undershoot
0x8001
Normalization Type B: PtRh30-PtRh6
0 to 1820.0°C
Normalization Type R: PtRh13-Pt
-50.0 to 1664.0°C
Normalization Type S: PtRh10-Pt
-50.0 to 1768.0°C
Normalization Terminal temperature
-25.0 to 85.0°C
Normalization Type K: NiCr-Ni
-270.0 to 1372.0°C
Normalization Type N (Rev. ≥D0)
-270.0 to 1300.0°C
Normalization Type J: Fe-CuNi
-210.0 to 1200.0°C
Conversion time 1 channel
80.4 ms with 50 Hz filter
Resolution Raw value output with respect to gain
1 LSB = 1 µV or 2 µV
Resolution Sensor temperature
1 LSB = 0.1°C
Measurement range Raw value
±65.534 mV
Resolution Terminal temperature
1 LSB = 0.1°C
Conversion time N channels
(n + 1) x 40.2 ms with 50 Hz filter
Measurement range Terminal temperature
-25 to 85°C
Certifications EAC
Yes
Certifications KC
Yes
Certifications ABS
Yes
Certifications KR
Yes
Certifications LR
ENV1
Certifications DNV
Temperature: B (0 - 55°C); Humidity: B (up to 100%); Vibration: B (4 g); EMC: B (bridge and open deck)
Certifications ATEX
Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
Certifications UL
cULus E115267; Industrial control equipment
Certifications HazLoc
cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
Certifications UKCA
Yes
Certifications CE
Yes
Power consumption Internal I/O
0.91 W
Power consumption Bus
0.01 W
Diagnostics Inputs
Yes, using LED status indicator and software
Pitch
12.5+0.2 mm
Diagnostics Module run/error
Yes, using LED status indicator and software
Note
Order 1x terminal block X20TB12 separately.; Order 1x bus module X20BM11 separately.
Degree of protection per EN 60529
IP20
Electrical isolation
Channel isolated from bus; Channel not isolated from channel
Nonlinearity
±0.001%
Common-mode range
±15 V
Max. gain drift
0.01%/°C
Permissible input signal
Max. ±5 V
Crosstalk between channels
<-70 dB
Input filter
First-order low-pass filter / cutoff frequency 500 Hz
Linearization method
Internal
Conversion procedure
Sigma-delta
Terminal temperature compensation
Internal
Sensor standard
EN 60584
Output format
INT
Input
Thermocouple
Filter time
Configurable between 1 ms and 66.7 ms
Status indicators
I/O function per channel, operating state, module status
Digital converter resolution
16-bit
B&R ID code
0x1BA9
I/O module
6 inputs for thermocouples

Product condition

Related documents X20AT6402 Specs