8BVI0660HWS0.000-1 B&R Electronic Components
Part#:8BVI0660HWS0.000-1
Manufacturer:B&R
Product Lifecycle:Active
Get a quick Quote!
ACOPOSmulti inverter module, 66 A, AS, wall mounting
Check out the 8BVI0660HWS0.000-1 B&R price in the box on the right side or send a quick quote.
Product Details
- Weight10.9 kg
- Permissible mounting orientations Hanging vertically Yes
- Switching delay Rising edge 52 µs ±0.5 µs (digitally filtered)
- Switching delay at nominal input voltage Enable 0 → 1, ready for PWM Max. 100 µs
- Input voltage Nominal 24 VDC
- Switching threshold Low <5 V
- Electrical isolation Input - Inverter module Yes
- Protective measures Open-circuit monitoring Yes
- Connection cross section range Flexible and fine-stranded wires ---
- Max. motor line length depending on switching frequency Switching frequency 10 kHz 25 m
- Reduction of continuous current depending on installation elevation Starting at 500 m above sea level 6.6 Aeff per 1000 m
- Certifications EAC Yes
- Modulation compared to ground potential Max. ±38 V
- Output voltage 24 VDC +5.8% / -0%
- DC bus capacitance 1980 µF
- Switching threshold High >15 V
- Input voltage Maximum 30 VDC
- Electrical isolation Input - Input Yes
- Max. motor line length depending on switching frequency Switching frequency 5 kHz 25 m
- Switching delay at nominal input voltage Enable 1 → 0, PWM off Max. 20.5 ms
- Protective measures Undervoltage monitoring Yes
- Protective measures Overload and short-circuit protection Yes
- Max. motor line length depending on switching frequency Switching frequency 20 kHz 25 m
- Variant U, V, W, PE M8 threaded bolts
- Variant Shield connection Yes
- Protective measures Short-circuit and ground fault protection Yes
- Protective measures Overload protection Yes
- Output voltage DC bus voltage (UDC): 260 to 315 VDC 25 VDC * (UDC/315)
- Reduction of continuous current depending on switching frequency Switching frequency 20 kHz 0.56 A/K (starting at -90°C)
- Reduction of continuous current depending on switching frequency Switching frequency 10 kHz 0.92 A/K (starting at -5°C)
- Power dissipation depending on switching frequency Switching frequency 5 kHz [0.03 * IM² + 7.9 * IM + 90] W
- Output voltage DC bus voltage (UDC): 315 to 800 VDC 24 VDC ±6%
- Power dissipation depending on switching frequency Switching frequency 20 kHz [0.17 * IM² + 27 * IM + 310] W
- Power dissipation depending on switching frequency Switching frequency 10 kHz [0.11 * IM² + 11 * IM + 185] W
- Reduction of continuous current depending on switching frequency Switching frequency 5 kHz 1.4 A/K (starting at 41°C)
- Voltage Nominal 750 VDC
- Certifications KC Yes
- Module width 4
- Pollution degree per EN 61800-5-1 2 (non-conductive pollution)
- Certifications Functional safety Yes
- Degree of protection per EN 60529 IP20
- Certifications UL cULus E225616; Power conversion equipment
- Overvoltage category per EN 61800-5-1 III
- Certifications CE Yes
- Discharge capacitance 0.44 µF
- Response threshold for open-circuit monitoring Approx. 0.5 A
- OSSD signal connections Permitted ; Max. test pulse length: 500 µs
- Response threshold for undervoltage monitoring 24 VDC +0% / -4%
- Circuit Sink
- Extinction potential Approx. 30 V
- Max. extinction energy per switching operation 3 Ws
- Input current at nominal voltage Approx. 30 mA
- Max. switching frequency 0.5 Hz
- Max. output frequency 598 Hz
- Continuous current 4.2 A
- Max. internal resistance 0.15 Ω
- Peak current 132 Aeff
- Continuous current per motor connection 66 Aeff
- Possible switching frequencies 5 / 10 / 20 kHz
- Nominal switching frequency 5 kHz
- Insulation stress of the connected motor per IEC TS 60034-25:2004 Limit value curve A
- Terminal cable cross section dimension of shield connection 12 to 50 mm
- Cooling and mounting type Wall mounting
- Max. power consumption 27 W + PSLOT1 + PSLOT2 + P24 V Out + PHoldingBrake
- Input capacitance 32.9 µF
- B&R ID code 0xBE8A
- Input voltage 25 VDC ±1.6%
- Continuous power per motor connection 48 kW
- Variant ACOPOSmulti backplane
- Slots for plug-in modules 2
- Quantity 2
- Continuous power consumption 48.8 kW
- Fuse protection 250 mA (slow-blow) electronic, automatic reset
- Dimensions Depth Wall mounting 263 mm
- Temperature Operation Maximum 55°C
- Temperature Operation Nominal 5 to 40°C
- Dimensions Width 213.5 mm
- Dimensions Height 317 mm
- Temperature Transport -25 to 70°C
- Relative humidity Transport Max. 95% at 40°C
- Relative humidity Operation 5 to 85%
- Relative humidity Storage 5 to 95%
- Installation elevation above sea level Nominal 0 to 500 m
- Permissible mounting orientations Standing horizontally No
- Temperature Storage -25 to 55°C
- Permissible mounting orientations Horizontal, face up Yes
- Switching delay Falling edge 53 µs ±0.5 µs (digitally filtered)
- Installation elevation above sea level Maximum 4000 m
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8BVI0660HWS0.000-1 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of B&R
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
B&R Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many B&R Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from B&R, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
