8BVI0440HCSS.000-1 B&R Electronic Components
Part#:8BVI0440HCSS.000-1
Manufacturer:B&R
Product Lifecycle:Active
Get a quick Quote!
ACOPOSmulti SafeMOTION EnDat 2.2 inverter module, 44 A, AS, cold plate or pass-through mounting
Check out the 8BVI0440HCSS.000-1 B&R price in the box on the right side or send a quick quote.
Product Details
- Weight4.3 kg
- Reduction of continuous current depending on switching frequency and mounting type Switching frequency 5 kHz Pass-through mounting 1.26 A/K (starting at 40°C)
- Reduction of continuous current depending on switching frequency and mounting type Switching frequency 10 kHz Pass-through mounting 0.37 A/K (starting at -36°C)
- Dimensions Height 317 mm
- Relative humidity Storage 5 to 95%
- Relative humidity Transport Max. 95% at 40°C
- Temperature Storage -25 to 55°C
- Relative humidity Operation 5 to 85%
- Permissible mounting orientations Hanging vertically Yes
- Synchronous serial interface Signal transmission RS485
- Electrical isolation Input - Inverter module Yes
- Temperature Transport -25 to 70°C
- Permissible mounting orientations Standing horizontally No
- Switching threshold Low <5 V
- Input voltage Maximum 30 VDC
- Switching delay Falling edge 53 µs ±0.5 µs (digitally filtered)
- Switching delay Rising edge 52 µs ±0.5 µs (digitally filtered)
- Switching threshold High >15 V
- Input voltage Nominal 24 VDC
- Encoder power supply Output voltage Typ. 12.5 V
- Electrical isolation Encoder - ACOPOSmulti No
- Protective measures Open-circuit monitoring Yes
- Protective measures Overload and short-circuit protection Yes
- Max. motor line length depending on switching frequency Switching frequency 20 kHz 25 m
- Protective measures Short-circuit and ground fault protection Yes
- Max. motor line length depending on switching frequency Switching frequency 10 kHz 25 m
- Variant U, V, W, PE Connector
- Variant Shield connection Yes
- Certifications UL cULus E225616; Power conversion equipment
- Certifications KC Yes
- Protective measures Overload protection Yes
- Voltage Nominal 750 VDC
- Reduction of continuous current depending on installation elevation Starting at 500 m above sea level 4.4 Aeff per 1000 m
- Output voltage DC bus voltage (UDC): 315 to 800 VDC 24 VDC ±6%
- Power dissipation depending on switching frequency Switching frequency 5 kHz [0.07 * IM² + 7.3 * IM + 40] W
- Certifications CE Yes
- Certifications EAC Yes
- Degree of protection per EN 60529 IP20
- Module width 2
- Pollution degree per EN 61800-5-1 2 (non-conductive pollution)
- Input current at nominal voltage Approx. 10 mA
- Circuit Sink
- Discharge capacitance 0.22 µF
- Max. encoder cable length 100 m ; Depends on the cross section of the power supply wires in the encoder cable
- Status indicators UP/DN LEDs
- Max. power consumption per encoder interface PSMC[W] = 19 V * IEncoder[A]
- Response threshold for open-circuit monitoring Approx. 0.5 A
- Response threshold for undervoltage monitoring 24 VDC -2% / -4%
- Terminal cable cross section dimension of shield connection 23 to 35 mm
- Max. internal resistance 0.15 Ω
- Continuous current 4.2 A
- Extinction potential Approx. 30 V
- Max. switching frequency 0.5 Hz
- Insulation stress of the connected motor per IEC TS 60034-25:2004 Limit value curve A
- Nominal switching frequency 5 kHz
- Continuous power per motor connection 32 kW
- Possible switching frequencies 5 / 10 / 20 kHz
- Continuous current per motor connection 44 Aeff
- Input capacitance 32.9 µF
- Continuous power consumption 32.5 kW
- Fuse protection 250 mA (slow-blow) electronic, automatic reset
- Variant ACOPOSmulti backplane
- B&R ID code 0xAA1F
- Max. power consumption 31 W + PSMC1 + PSLOT2 + P24 V Out + PHoldingBrake
- Input voltage 25 VDC ±1.6%
- Slots for plug-in modules 2
- Temperature Operation Nominal 5 to 40°C
- Encoder power supply Protective measures Overload-proof Yes
- Dimensions Depth Cold plate 212 mm
- Encoder power supply Protective measures Short-circuit proof Yes
- Terminal connection cross section Approbation data CSA 20 to 6
- Terminal connection cross section Approbation data UL/C-UL-US 20 to 6
- Terminal connection cross section Flexible and fine-stranded wires With wire end sleeves 0.5 to 16 mm²
- Reduction of continuous current depending on switching frequency and mounting type Switching frequency 20 kHz Pass-through mounting 0.24 A/K (starting at -137°C)
- Reduction of continuous current depending on switching frequency and mounting type Switching frequency 20 kHz Cold plate mounting 0.32 A/K (starting at -82°C)
- Reduction of continuous current depending on switching frequency and mounting type Switching frequency 10 kHz Cold plate mounting 0.62 A/K (starting at 6°C)
- Dimensions Width 106.5 mm
- Reduction of continuous current depending on switching frequency and mounting type Switching frequency 5 kHz Cold plate mounting 0.8 A/K (starting at 45°C)
- Installation elevation above sea level Maximum 4000 m
- Installation elevation above sea level Nominal 0 to 500 m
- Permissible mounting orientations Horizontal, face up Yes
- Electrical isolation Input - Input Yes
- Synchronous serial interface Data transfer rate 6.25 Mbit/s
- Encoder power supply Load capacity 350 mA
- Protective measures Undervoltage monitoring Yes
- Max. motor line length depending on switching frequency Switching frequency 5 kHz 25 m
- Output voltage DC bus voltage (UDC): 260 to 315 VDC 25 VDC * (UDC/315)
- Power dissipation depending on switching frequency Switching frequency 10 kHz [0.2 * IM² + 11.1 * IM + 130] W
- Power dissipation depending on switching frequency Switching frequency 20 kHz [1.85 * IM² + 3.8 * IM + 300] W
- Certifications Functional safety Yes (openSAFETY)
- Temperature Operation Maximum 55°C
- Dimensions Depth Pass-through mounting 209 mm
- Cooling and mounting type Cold plate or pass-through mounting
- Overvoltage category per EN 61800-5-1 III
- DC bus capacitance 990 µF
- Modulation compared to ground potential Max. ±38 V
- Encoder monitoring Yes
- Type EnDat 2.2
- Connections 9-pin female DSUB connector
- Max. extinction energy per switching operation 3 Ws
- Output voltage 24 VDC +5.8% / -0.5%
- Max. output frequency 598 Hz
- Peak current 88 Aeff
- Quantity 2
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8BVI0440HCSS.000-1 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of B&R
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
B&R Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many B&R Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from B&R, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
