Variable Frequency Drives (VFD)

I55AE390F10V11003S

Lenze I55AE390F10V11003S is a variable speed/frequency drive (VSD/VFD) and inverter within the Drives sub-range, designed for variable speed and frequency control, compact inverter operation, DC-injection braking, brake management, S-ramps for smooth acceleration and deceleration, flying restart circuit, and PID controller functionality. It features a built-in RFI filter, standard I.O., and conformal coating. The dimensions are H685mm x W258mm x D304mm. It supports Modbus RTU communication protocol and includes protection functions for overvoltage category, leakage current, earth fault resistance, and overtemperature of the motor. The rated current varies with duty and voltage: 216A for light-duty at 400Vac, 187A for light-duty at 480Vac, 180A for heavy-duty at 400Vac, and 156A for heavy-duty at 480Vac. It operates on a supply voltage of 400Vac / 480Vac and can be mounted in a control cabinet or on a surface/wall. The ambient air temperature for operation is max. 45°C at a switching frequency of 2kHz or 4kHz, and max. 40°C at 8kHz or 16kHz. It has an IP20 degree of protection, is designed for a 3-phase network (3P / 3AC), with a network frequency of 45-65 Hz (input) and 0-599 Hz (output). The device includes 1 analog output (0-10Vdc; 0-20mA or 4-20mA), 5 digital inputs (PNP/NPN logic), 1 digital output (max. 100mA), and 2 analog inputs (-10...+10Vdc; 0-20mA or 4-20mA). The rated active power is 110kW for light-duty and 90kW for heavy-duty, with rated power of 150HP for light-duty and 125HP for heavy-duty, both at 400-480Vac.

Lenze

ATV32H018M2

Schneider Electric ATV32H018M2 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 32 series, designed to offer control for asynchronous and synchronous motors with a range of safety and performance functions including STO (Safe Torque Off up to SIL3 / PLe), SS1 (Safe Stop 1), SLS (Safely Limited Speed), SDI (Safe Direction Information), and sensorless flux vector control. It supports a U/F ratio with 5 points for energy saving or quadratic applications and can deliver 170-200% of the nominal motor torque without a sensor for synchronous motors. This model comes with a built-in EMC filter and heatsink, operates on a single-phase supply voltage of 170-264Vac, and offers a degree of protection of IP20. Its dimensions are H317mm x W45mm x D245mm. The rated current is 1.5A at 4kHz, with a maximum current of 1.5A for 60 seconds. Communication is facilitated through Modbus and CANopen protocols. The output network frequency ranges from 0.1-599 Hz. It features 1 analog output (0-10Vdc / 0-20mA), 4 digital inputs (24Vdc; sink/source) plus additional configurable inputs, 2 digital outputs (24Vdc; sink/source and relay contacts), and 3 analog inputs (-10...+10Vdc and 0-20mA / 4-20mA). The current consumption is 3.4A at 200Vac and 2.8A at 240Vac, with a rated active power of 180W / 0.18kW and a power dissipation/losses of 25W.

Schneider Electric

ATV61HD22Y

Schneider Electric ATV61HD22Y is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for three-phase networks with a supply voltage range of 425-759Vac, including nominal voltages of 480Vac, 500Vac, 600Vac, and 690Vac. It features variable speed/frequency drive capabilities with U/F ratio adjustments (2 points / 5 points / energy saving), sensorless flux vector control (standard / energy saving), and vector control without speed feedback, capable of delivering 120% of the nominal motor torque. The design includes a built-in EMC filter (class C3), a built-in heatsink, and a coated version for enhanced chemical resistance, conforming to a reinforced version. It offers an IP20 UL type 1 degree of protection and has dimensions of H420mm x W240mm x D236mm. The rated current is specified as 29A at 500Vac and 4kHz, 27A at 575Vac and 4kHz, 27A at 690Vac and 4kHz, with a maximum current of 34.8A for 60 seconds. For mounting, it supports wall mounting and communicates via Modbus and CANopen protocols. The output network frequency ranges from 0.1-599 Hz. It includes 1 analog output (0-10Vdc / 0-20mA), 5 digital inputs (24Vdc; sink/source) plus 1 additional digital input programmable as discrete or PTC input and another for PWR safety, along with 2 digital outputs. Analog inputs include 1 for -10...+10Vdc and another for 0-10Vdc / 0-20mA. The current consumption is 29A at 500Vac, 24A at 600Vac, and 27A at 690Vac, with rated active power of 22kW at 690Vac and 18.5kW at 500Vac, equivalent to 25HP.

Schneider Electric

C200-07200610A10101AB100

NIDEC C200-07200610A10101AB100 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the C200 series designed with air cooling. It operates on a supply voltage of 200Vac-240Vac (220Vac / 230Vac) and has dimensions of frame size 7 H21.93" x W10.63" x D11.02" (H557mm x W270mm x D280mm), with a degree of protection rated at IP20 NEMA 1. The rated current is 75A for Normal duty and 61A for Heavy-duty. It supports Modbus RTU communication protocol over a 3-phase input network with a supply input frequency of 45-66 Hz and an output frequency range of 0-550 Hz. The ambient air temperature for operation ranges from -20°C to +60°C. It features 1 x analog output (10Vdc; source; single-ended), 5 x digital inputs (0-24Vdc; PNP/NPN) plus 1 x digital input (0-24Vdc), and 1 x digital output (50mA / 0-24Vdc; source; PWM) plus 1 x digital output (2A / 240Vac; source; relay contact type). Additionally, it includes 1 x analog input (0-20mA / 4-20mA / 0-10Vdc; single-ended; 11-bit conversion resolution) and 1 x analog input (0-10Vdc; single-ended; 11-bit conversion resolution). The rated active power is 18.5kW for Normal duty and 15kW for Heavy-duty, with a rated power of 25HP for Normal duty and 20HP for Heavy-duty.

Nidec

C200-03200100A10101AB100

NIDEC C200-03200100A10101AB100 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the C200 series designed with air cooling. It operates on a supply voltage of 200Vac-240Vac (220Vac / 230Vac) and has dimensions of frame size 3 H8.9" x W3.54" x D6.3" (H226mm x W90mm x D160mm), with a degree of protection rated at IP20 NEMA 1. The rated current is 10A for both normal and heavy-duty operations. It supports Modbus RTU communication protocol and can be used with either single-phase input (2P) or 3-phase input (3P) networks, with a network frequency of 45-66 Hz (supply input) and an output frequency range of 0-550 Hz. The ambient air temperature for operation ranges from -20°C to +60°C. It features 1 x analog output (10Vdc; source; single-ended), 5 x digital inputs (0-24Vdc; PNP/NPN) plus 1 x digital input (0-24Vdc), and 1 x digital output (50mA / 0-24Vdc; source; PWM) plus 1 x digital output (2A / 240Vac; source; relay contact type). Additionally, it includes 1 x analog input (0-20mA / 4-20mA / 0-10Vdc; single-ended; 11-bit conversion resolution) and 1 x analog input (0-10Vdc; single-ended; 11-bit conversion resolution). The rated active power is 2.2kW, and the rated power is 3HP for both normal and heavy-duty applications.

Nidec

VFD022C53A-21

Variable Frequency Drive, 3 phase, 575 VAC Input, 2 HP, frame A, wall mount, IP20, NEMA 1

Delta

VFD055C23B-21

Variable Frequency Drive, 3 phase, 230 VAC Input, 7.5 HP, frame B, wall mount, IP20, NEMA 1

Delta

VFD110C4EB-21

Variable Frequency Drive, 3 phase, 460 VAC build-in EMI Input, 15 HP, frame B, wall mount, IP20, NEMA 1

Delta

VFD220C23C-21

Variable Frequency Drive, 3 phase, 230 VAC Input, 30 HP, frame C, IP20, NEMA 1

Delta

VFD185C23C-21

Variable Frequency Drive, 3 phase, 230 VAC Input, 25 HP, frame C, IP20, NEMA 1

Delta

VFD150C4EC-21

Variable Frequency Drive, 3 phase, 460 VAC build-in EMI Input, 25 HP, frame C, IP20, NEMA 1

Delta

VFD185C63C-21

Variable Frequency Drive, 3 phase, 690 VAC Input, 15 HP, frame C, IP20, NEMA 1

Delta

VFD370C63C-21

Variable Frequency Drive, 3 phase, 690 VAC Input, 30 HP, frame C, IP20, NEMA 1

Delta

ESV112N01SXB

Lenze ESV112N01SXB is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for control cabinet or surface/wall mounting. It operates within an ambient air temperature range of -10 to +55 °C, with a derating of 2.5% per °C above +40°C. This model features 1 analog output (0-10Vdc) at Terminal 5, and its degree of protection is NEMA 1 IP31. The dimensions are H191mm x W99mm x D138mm. It also includes 1 digital output (NPN; 24Vdc / 50mA) at Terminal 14, 2 analog inputs (0-10Vdc at terminal 5 and 4-20mA at terminal 25), and 5 digital inputs with various functionalities including START/STOP. The ESV112N01SXB is equipped with protection functions against earth fault, phase loss, overvoltage, under voltage, motor stalling, over temperature, motor overload (125% of FLA), and short circuit (SCCR = 200kA at rated voltage). Designed for indoor use only with a frame size G2, it supports a supply voltage of 120Vac / 240Vac and a network frequency of 48-62 Hz (input) and 0-500 Hz (output), without a communication interface. The rated current is 6A for both 120Vac and 240Vac, suitable for a single-phase / 1P network. The rated active power is 1.1kW, and the rated power is 1-1/2HP for both 120Vac and 240Vac.

Lenze

ESV112N02YXB

Lenze ESV112N02YXB is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for control cabinet or surface/wall mounting. It operates within an ambient air temperature range of -10 to +55 °C, with a derating of 2.5% per °C above +40°C. This model features 1 x analog output (0-10Vdc) at Terminal 5, and its degree of protection is NEMA 1 IP31. The dimensions are H191mm x W99mm x D138mm. It includes 1 x digital output (NPN; 24Vdc / 50mA) at Terminal 14, 1 x analog input (0-10Vdc) at terminal 5, 1 x analog input (4-20mA) at terminal 25, and multiple digital inputs (PNP/NPN logic) at terminals 1 START/STOP, 13A, 13B, 13C, and 13D. Protection functions cover earth fault, phase loss, overvoltage, under voltage, motor stalling, over temperature, motor overload (125% of FLA), and short circuit (SCCR = 200kA at rated voltage). Designed for indoor use only with a frame size G2, it has a supply voltage of 240Vac, network frequency of 48-62 Hz (input) and 0-500 Hz (output), without a communication interface. The rated current is 6A at 240Vac, supporting both single-phase and 3-phase networks. It delivers a rated active power of 1.1kW and a rated power of 1-1/2HP at 240Vac.

Lenze

ESV152N04TXC-CC

Lenze Drive

Lenze

ESV222N02YXC

Lenze ESV222N02YXC is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for control cabinet or surface/wall mounting. It operates within an ambient air temperature range of -10 to +55 °C, with a derating of 2.5% per °C above +40 °C. This model features 1 x analog output (0-10Vdc) at Terminal 5, and its degree of protection is NEMA 4X IP65. The dimensions are H203mm x W181mm x D172mm. It includes 1 x digital output (NPN; 24Vdc / 50mA) at Terminal 14, 1 x analog input (0-10Vdc) at terminal 5, 1 x analog input (4-20mA) at terminal 25, and multiple digital inputs (PNP/NPN logic) at terminals 1 START/STOP, 13A, 13B, 13C, and 13D. Protection functions cover earth fault, phase loss, overvoltage, under voltage, motor stalling, over temperature, motor overload (125% of FLA), and short circuit (SCCR = 200kA at rated voltage). Designed for indoor use only, it has a frame size S1 with natural convection cooling (fan-less). The supply voltage is 240Vac, with a network frequency of 48-62 Hz (input) and 0-500 Hz (output). It does not include a communication interface. The rated current is 9.6A at 240Vac, supporting both single-phase and 3-phase networks. The rated active power is 2.2kW (240Vac), equivalent to 3HP (240Vac).

Lenze

ESV223N04TXB

Lenze ESV223N04TXB is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for control cabinet or surface/wall mounting. It operates within an ambient air temperature range of -10 to +55 °C, with a derating of 2.5% per °C above +40°C. This model features 1 x analog output (0-10Vdc) at Terminal 5, and its degree of protection is NEMA 1 IP31. The dimensions are H318mm x W176mm x D205mm. It includes 1 x digital output (NPN; 24Vdc / 50mA) at Terminal 14, 1 x analog input (0-10Vdc) at terminal 5, 1 x analog input (4-20mA) at terminal 25, and multiple digital inputs including 1 x digital input (PNP/NPN logic) at terminal 1 for START/STOP, and 1 x digital input each at terminals 13A, 13B, 13C, and 13D. Protection functions cover earth fault, phase loss, overvoltage, under voltage, motor stalling, over temperature, motor overload (125% of FLA), and short circuit (SCCR = 200kA at rated voltage). Designed for indoor use only with a frame size J1, it supports a supply voltage of 400Vac / 480Vac, network frequency of 48-62 Hz (input) and 0-500 Hz (output), without a communication interface. The rated current is 46A (400Vac) and 40A (480Vac), for a 3-phase network. It offers a rated active power of 22kW and rated power of 30HP for 400-480Vac.

Lenze

ESV371N02YXB

Lenze ESV371N02YXB is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for control cabinet or surface/wall mounting. It operates within an ambient air temperature range of -10 to +55 °C, with a derating of 2.5% per °C above +40°C. This model features 1 x analog output (0-10Vdc) at Terminal 5, and its degree of protection is NEMA 1 IP31. The dimensions are H190mm x W99mm x D111mm. It also includes 1 x digital output (NPN; 24Vdc / 50mA) at Terminal 14, 1 x analog input (0-10Vdc) at terminal 5, 1 x analog input (4-20mA) at terminal 25, and multiple digital inputs (PNP/NPN logic) at terminals 1 START/STOP, 13A, 13B, 13C, and 13D. Protection functions cover earth fault, phase loss, overvoltage, under voltage, motor stalling, over temperature, motor overload (125% of FLA), and short circuit (SCCR = 200kA at rated voltage). Designed for indoor use only with a frame size G1, it has a supply voltage of 240Vac, network frequency of 48-62 Hz (input) and 0-500 Hz (output), without a communication interface. The rated current is 2.4A at 240Vac, supporting both single-phase and three-phase networks. Its rated active power is 0.37kW at 240Vac, equivalent to 1/2HP at 240Vac.

Lenze

ESV371N04TLC

Lenze ESV371N04TLC is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for control cabinet or surface/wall mounting. It operates within an ambient air temperature range of -10 to +55 °C, with a derating of 2.5% per °C above +40°C. This model features 1 x analog output (0-10Vdc) at Terminal 5, and its degree of protection is NEMA 4X IP65. It includes 1 x digital output (NPN; 24Vdc / 50mA) at Terminal 14, alongside 1 x analog input (0-10Vdc) at terminal 5 and 1 x analog input (4-20mA) at terminal 25. The digital inputs consist of 1 x digital input (PNP/NPN logic) at terminal 1 for START/STOP functions, and 1 x digital input each at terminals 13A, 13B, 13C, and 13D. Protection functions include earth fault, phase loss, overvoltage, under voltage, motor stalling, over temperature, motor overload (125% of FLA), and short circuit (SCCR = 200kA at rated voltage). Its design incorporates a built-in EMC filter, a built-in disconnect switch, and utilizes natural convection cooling (fan-less) suitable for indoor use only. The supply voltage is rated at 400Vac / 480Vac with a network frequency of 48-62 Hz (input) and 0-500 Hz (output). It does not have a communication interface. The rated current is 1.3A at 400Vac and 1.1A at 480Vac, for a 3-phase network. The rated active power is 0.37kW, and the rated power is 1/2HP for both 400-480Vac.

Lenze