Pressure Sensors

PT200PSIG-1103-U6-DT043P

Pressure Transmitter, Ratiometric Output (3-Wire), , For mobile hydraulic applications, Ceramic measuring cell, Compact and robust design, Excellent EMC properties, Excellent accuracy and long-term stability, Complies with ISO 16750-2, Pressure range 0…200 psi rel., 5 VDC ± 10 %, Ratiometric output 10…90 %, Process connection 1/4-18 NPT male thread, Plug-in device, Deutsch DT04-3P, "

Turck

PT200PG-4000-03-LI3-H1141/D811

Turck PT200PG-4000-03-LI3-H1141/D811 is a sensor designed for measuring relative pressure within a range of 0 to +200 psig. This model, part of the PT4000 series, features a cylindrical body and is equipped with a 1/4" NPT threaded male process port for connection. It comes pre-equipped with a connector, facilitating straightforward integration into various instrumentation setups.

Turck

PT100PG-4000-03-LI3-H1141/D811

Turck PT100PG-4000-03-LI3-H1141/D811 is a sensor designed for instrumentation relative pressure measurement. It operates within an ambient air temperature range of -40°C to +85°C and is suitable for Class 1 Div. 2 grp. A/B/C/D environments. This model features a pre-wired 2m / 6ft cable with bare end flying leads and a 1/4" NPT threaded female process port for connection. It belongs to the PT4300 series and offers a degree of protection rated at IP66. The sensor requires a supply voltage of 10-28Vdc, with 12Vdc and 24Vdc as nominal values. Its cylindrical body is made from 1.4404 (316L) stainless steel housing, ensuring durability. The pressure range it can measure is from 0 to +100psi. It includes protection against reverse polarity and has one analog output (4-20mA; loop powered). The mechanical durability of this sensor is rated at 100,000,000 operations at no load. The current consumption is 20mA.

Turck

PT1000PSIG-2003-I2-H1143/S1262

Turck PT1000PSIG-2003-I2-H1143/S1262 is a sensor designed for instrumentation relative pressure measurement and transmission. It operates within an ambient air temperature range of -30°C to +85°C and is equipped with a 4-pin M12 Eurofast QD male connector and a 1/4" NPT threaded male process port. As part of the PT2000 series, this sensor features a cylindrical body with an IP67 degree of protection, indicating its capability to withstand dust and water ingress. It requires a supply voltage of 12-33VDC, with 12VDC and 24VDC as nominal values. The sensor's housing and pressure transducer are made from 1.4404 (316L) stainless steel, ensuring durability in various environments. It can measure pressure from 0 to +1000psig and fluid medium temperatures from -40°C to +125°C. The sensor provides a single analog output (0-10Vdc) and has a current consumption of 7mA.

Turck

PT16A-1003-IOL-H1141

Pressure Transmitter, With 2 Switching Outputs and IO-Link, , Ceramic measuring cell, Compact and robust design, Excellent EMC properties, , Pressure range 0…1.6 bar abs., 18…33 V DC, NO/NC contact, 2 × PNP/NPN outputs, IO-Link, Process connection 1/4-18 NPT male thread, Plug-in device, M12 × 1, "

Turck

PS510-600-04-LI2UPN8-H1141

Turck PS510-600-04-LI2UPN8-H1141 is a sensor designed for measuring pressure within a range of 0 to +600bar. It features a programmable functionality for relative pressure sensing and operates within an ambient air temperature range of -40°C to +80°C. This sensor is equipped with a 4-pin M12 Eurofast QD male connector and a G1/4" (1/4" BSPP) threaded female process port for connectivity. Part of the PS+ series, it offers a degree of protection rated at IP66 and requires a supply voltage of 18-30Vdc, with 24Vdc nominal. The cylindrical body is made from 1.4404 (316L) stainless steel for both the housing and measuring cell, ensuring durability. It has a maximum switching frequency of 300Hz and can operate in either NO (Normally Open) or NC (Normally Closed) modes, which are programmable. The sensor provides one analog output (4-20mA / 0-10Vdc; can also be used as a NPN/PNP digital output) and boasts measurement accuracy with setpoint hysteresis ≥0.5% analog / setpoint accuracy of +/-0.5% FS (of full scale) or +/-0.25% FS (of full scale).

Turck

PS510-250-04-LI2UPN8-H1141

Turck PS510-250-04-LI2UPN8-H1141 is a sensor designed for measuring pressure within a range of 0 to +250bar. It features a programmable functionality for relative pressure sensing and operates within an ambient air temperature range of -40°C to +80°C. This sensor is equipped with a 4-pin M12 Eurofast QD male connector and a 7/16"-20 UNF threaded male process port (SAE-ORB) for connection. It belongs to the PS+ series and offers a degree of protection rated at IP66. The supply voltage required for operation is 18-30Vdc, with a nominal voltage of 24Vdc. The sensor has a cylindrical body shape and is capable of a maximum switching frequency of 300Hz. Constructed with a 1.4404 (316L) stainless steel housing and measuring cell, it ensures durability. The operating mode can be programmed as NO (Normally Open) or NC (Normally Closed). It provides one analog output (4-20mA / 0-10Vdc; can also be used as a NPN/PNP digital output) and boasts measurement accuracy with setpoint hysteresis ≥0.5% analog / setpoint accuracy +/-0.5% FS (of full scale) or +/-0.25% FS (of full scale).

Turck

PS025V-504-2UPN8X-H1141

Turck PS025V-504-2UPN8X-H1141 is a sensor designed for pressure measurement with programmable instrumentation capabilities. It features a set point range of 1-100% and a reset point range of 0.5-99.5%, with measurement units including bar, psi, kPa, MPa, and miscellaneous options. The sensor operates within an ambient air temperature range of -40°C to +80°C and has a rotatable housing design with a diameter of 34mm. It is equipped with a 4-pin M12 Eurofast QD male connector and a G1/4" (1/4" BSPP) threaded male process port for connection. Part of the PS500 series, it offers an IP67 degree of protection and requires a supply voltage of 18-30Vdc (24Vdc nominal). The sensor's body is cylindrical, and it can reach a maximum switching frequency of 180Hz. Constructed from 1.4305 (303) stainless steel for both the housing and wetted parts, it also includes a ceramics Al2O3 pressure transducer and a stainless steel pressure connection. It measures pressure ranges from -1 to +25bar (-14.5 to +362.5psi) and supports the IO-Link communication protocol. The fluid medium temperature range is -40°C to +85°C, with operating modes that are programmable as NO (Normally Open) or NC (Normally Closed). It features protection against short-circuit (pulsed) and reverse polarity, with a response time between 50 - 600ms. The sensor provides 1 x analog output (4-20mA; can also be used as a NPN/PNP digital output), boasting a set point accuracy of +/-0.5% FS, analog accuracy of ≤+/-0.5% FS, repeatability of ≤0.5% of the measuring range, and a zero shift/span shift of ≤0.15% of the measuring range per °C. Its current consumption is 50mA, with time delays for ON-delay and OFF-delay settings ranging from 0-50.

Turck

PS010V-303-LI2UPN8X-H1141/S1685

Turck PS010V-303-LI2UPN8X-H1141/S1685 is a sensor designed for pressure measurement with instrumentation programmable compound pressure sensor capabilities. It features a set point range of 1-100% and a reset point range of 0.5-99.5%, with measurement units available in bar, psi, kPa, MPa, and miscellaneous. The sensor operates within an ambient air temperature range of -40°C to +80°C and is designed with a 2" NPT male sanitary diaphragm seal. It has a diameter of 34mm and comes pre-equipped with a 4-pin M12 Eurofast QD male connector and a 1/4" NPT threaded male process port. As part of the PS300 series, it offers an IP69K degree of protection and requires a supply voltage of 18-30Vdc (24Vdc nominal). The sensor's cylindrical body is made from 1.4305 (303) stainless steel housing, wetted parts, and pressure connection, with a ceramics Al2O3 pressure transducer. It can measure pressure ranges from -1 to +10bar (-14.5 to +145psi) and supports a fluid medium temperature range of -40°C to +85°C. The operating mode is programmable as NO (Normally Open) or NC (Normally Closed), and it includes protection functions against short-circuit (pulsed) and reverse polarity. The response time ranges from 50 to 600ms (0.05 to 0.6 s), and it features 1 x analog output (4-20mA; can be used as a NPN/PNP digital output). Measurement accuracy includes set point accuracy of +/-0.5% FS, analog accuracy of ≤+/-0.5% FS, response time <3ms, repeatability ≤0.5% of the measuring range, and zero shift/span shift ≤0.15% of the measuring range per °C. The current consumption is 50mA, with time delay settings for ON-delay and OFF-delay ranging from 0-50. It utilizes the IO-Link communication protocol.

Turck

PS010D-501T-LI2UPN8X-H1141

Turck PS010D-501T-LI2UPN8X-H1141 is a sensor designed for pressure measurement and switching tasks. It is part of the PS500 series and features a differential programmable pressure sensor/switch with a set point range of 1-100% and a reset point range of 0.5-99.5%. The unit measures pressure in bar, psi, kPa, MPa, and miscellaneous units, and can operate in ambient air temperatures ranging from -40°C to +80°C. The design includes a rotatable housing and a connection type that is pre-equipped with a 4-pin M12 Eurofast QD male connector and a 1/4" NPT threaded female process port. It offers an IP67 degree of protection and requires a supply voltage of 18-30Vdc, with 24Vdc nominal. The sensor has a cylindrical body shape and can switch at frequencies up to 180Hz. It is constructed with a 1.4305 (303) stainless steel housing, wetted parts, and pressure connection, along with a ceramics Al2O3 pressure transducer. The pressure range is 0 to +10bar. Communication is facilitated via IO-Link, and the operating mode can be programmed as NO (Normally Open) or NC (Normally Closed). It features 2 x digital outputs (15-30Vdc; NPN/PNP), protection against short-circuit (pulsed) and reverse polarity, and has a response time of 50 - 600ms. Measurement accuracy includes set point accuracy of +/-0.5% FS, analog accuracy of ≤+/-0.5% FS, with repeatability ≤0.5% of the measuring range, and zero shift/span shift ≤0.15% of the measuring range per °C. The current consumption is 50mA.

Turck

PS003V-503-LI2UPN8X-H1141/3GD

Turck PS003V-503-LI2UPN8X-H1141/3GD is a sensor designed for pressure measurement with instrumentation programmable compound pressure sensor capabilities. It features a set point range of 1-100% and a reset point range of 0.5-99.5%, with measurement units available in bar, psi, kPa, MPa, and miscellaneous. The sensor operates within an ambient air temperature range of -40°C to +80°C and is designed with a 1/2" NPT female 3-pieces assembled diaphragm seal and a rotatable housing. It has a diameter of 34mm and comes pre-equipped with a 4-pin M12 Eurofast QD male connector and a 1/4" NPT threaded male process port. As part of the PS500 series, it offers an IP67 degree of protection and requires a supply voltage of 18-30Vdc (24Vdc nom.). The sensor's cylindrical body is made from 1.4305 (303) stainless steel, including the housing, wetted parts, and pressure connection, with a ceramics Al2O3 pressure transducer. It measures pressure in the range of -1 to +2.5bar (-14.5 to +36psi) and can operate in temperatures ranging from -40°C to +85°C for the fluid medium. The operating mode is programmable as NO (Normally Open) or NC (Normally Closed), and it includes protection functions against short-circuit (pulsed) and reverse polarity. The response time ranges from 50 to 600ms (0.05 to 0.6 s), and it features 1 x analog output (4-20mA; can be used as a NPN/PNP digital output). Measurement accuracy includes set point accuracy of +/-0.5% FS, analog accuracy of ≤+/-0.5% FS, a response time of <3ms, repeatability of ≤0.5% of the measuring range, and zero shift/span shift of ≤0.15% of the measuring range per °C. The current consumption is 50mA, with time delay options for ON-delay and OFF-delay ranging from 0-50.

Turck

PS001V-303-LI2UPN8X-H1141/S1605

Turck PS001V-303-LI2UPN8X-H1141/S1605 is a sensor designed for pressure measurement with programmable instrumentation capabilities. It features a set point range of 1-100% and a reset point range of 0.5-99.5%, offering measurement units in bar, psi, kPa, MPa, and miscellaneous options. The sensor operates within an ambient air temperature range of -40°C to +80°C and has a cylindrical body with a diameter of 34mm. It is pre-equipped with a 4-pin M12 Eurofast QD male connector and a 1/4" NPT threaded male process port for connectivity. Part of the PS300 series, it boasts an IP69K degree of protection and requires a supply voltage of 18-30Vdc, with 24Vdc nominal. The sensor's housing and wetted parts are made of 1.4305 (303) stainless steel, with a ceramics Al2O3 pressure transducer and a stainless steel pressure connection. It measures pressure ranges from -1 to +1bar (-14.5 to +14.5psig) and fluid medium temperatures from -40°C to +85°C. The operating mode can be programmed as NO (Normally Open) or NC (Normally Closed), and it supports the IO-Link communication protocol. Protection functions include short-circuit (pulsed) and reverse polarity, with a response time of 50 - 600ms. It features 1 x analog output (4-20mA; can also be used as a NPN/PNP digital output), with a set point accuracy of +/-0.5% FS, analog accuracy of ≤+/-0.5% FS, a response time of <3ms, repeatability of ≤0.5% of the measuring range, and zero shift/span shift of ≤0.15% of the measuring range per °C. The current consumption is 50mA, and it offers time delay settings for ON-delay and OFF-delay from 0-50.

Turck

PS001R-303-LI2UPN8X-H1141/S1753

Turck PS001R-303-LI2UPN8X-H1141/S1753 is a sensor designed for pressure measurement with a programmable relative pressure sensor. It features a set point range of 1-100% and a reset point range of 0.5-99.5%. The sensor can measure pressure in units of bar, psi, kPa, MPa, and miscellaneous others. It operates in ambient air temperatures ranging from -40°C to +80°C and has a cylindrical body with a diameter of 34mm. The connection is facilitated by a pre-equipped 4-pin M12 Eurofast QD male connector and a 1/4" NPT threaded male process port. Part of the PS300 series, it offers an IP69K degree of protection and requires a supply voltage of 18-30Vdc, with 24Vdc nominal. The sensor's housing and wetted parts are made of 1.4305 (303) stainless steel, with a ceramics Al2O3 pressure transducer and a stainless steel pressure connection. It can measure pressure from 0 to +1bar or 0 to +14.5psig and supports the IO-Link communication protocol. The fluid medium temperature range is -40°C to +85°C. It operates in either NO (Normally Open) or NC (Normally Closed) modes, which are programmable. Protection functions include short-circuit (pulsed) and reverse polarity. The response time ranges from 50 to 600ms, and it has 1 x analog output (0-10Vdc; can be used as a NPN/PNP digital output). Measurement accuracy includes set point accuracy of +/-0.5% FS, analog accuracy of <=+/-0.5% FS, a response time of <3ms, repeatability of <=0.5% of the measuring range, and zero shift/span shift of <=0.15% of the measuring range per °C. The current consumption is 50mA, with time delays for ON-delay and OFF-delay settings ranging from 0-50.

Turck

XMLB300D2S13

Telemecanique Sensors XMLB300D2S13 is an electromechanical pressure switch designed for regulating between two thresholds. It falls within the XML sub-range and features an adjustable differential setting scale. The case of the switch is made from zinc alloy, ensuring durability. It offers a fluid connection via 1/2”-14 NPT and 1/4" - 18 NPTF (female) types. The XMLB300D2S13 operates with SPDT (Single Pole Double Throw) - 1C/O contacts type, accommodating a pressure range of 2.2-30MPa or 22-300 bar, which translates to 319-4350 psi.

Telemecanique Sensors

XMLB300D2C11

Telemecanique Sensors XMLB300D2C11 is an electromechanical pressure switch designed for regulating between two thresholds. It falls under the XML sub-range and features an adjustable differential setting scale. The case of the switch is made from zinc alloy, ensuring durability. It utilizes an EN 175301-803-A connector for electrical connections and a G 1/4 (BSP female) fluid connection for versatility in installation. The switch operates with SPDT (Single Pole Double Throw) - 1C/O contacts, accommodating a wide range of applications. It is capable of handling pressures from 2.2 to 30 MPa (22 to 300 bar, or 319 to 4350 psi), making it suitable for various industrial uses.

Telemecanique Sensors

XMLB160D2C11

Telemecanique Sensors XMLB160D2C11 is an electromechanical pressure switch designed for regulating between two thresholds with an adjustable differential. It falls within the XML sub-range and features a zinc alloy case for durability. This part is equipped with an EN 175301-803-A connector and a G 1/4 (BSP female) fluid connection for compatibility with various systems. It operates with SPDT (Single Pole Double Throw) - 1C/O contacts, supporting a pressure range of 1-16MPa (10-160 bar or 145-2320 psi), making it suitable for a wide range of pressure monitoring applications.

Telemecanique Sensors

XMLB020A2S13

Telemecanique Sensors XMLB020A2S13 is an electromechanical pressure switch designed for regulation between two thresholds, featuring an adjustable differential setting scale. This model, part of the XML range, is constructed with a zinc alloy case and offers a fluid connection via 1/2”-14 NPT and 1/4" - 18 NPTF (female) ports. It operates with SPDT (Single Pole Double Throw) - 1C/O contacts, accommodating pressures ranging from 130kPa to 2MPa (1.3-20 bar or 18.9-290 psi).

Telemecanique Sensors

XMLB010A2C11

Telemecanique Sensors XMLB010A2C11 is an electromechanical pressure switch designed for regulating between two thresholds with an adjustable differential. It falls within the XML sub-range and features a zinc alloy case for durability. This model utilizes an EN 175301-803-A connector and a G 1/4 (BSP female) fluid connection for installation. It is equipped with SPDT (Single Pole Double Throw) - 1C/O contacts, supporting a pressure range of 70kPa-1MPa (0.7-10 bar or 10.15-145 psi).

Telemecanique Sensors

XMLB002A2C11

Telemecanique Sensors XMLB002A2C11 is an electromechanical pressure switch designed for regulating between two thresholds with an adjustable differential. It falls within the XML sub-range and features a zinc alloy case for durability. This part is equipped with an EN 175301-803-A connector and a G 1/4 (BSP female) fluid connection for easy integration. The switch operates with SPDT (Single Pole Double Throw) - 1C/O contacts, supporting a pressure range of 30-250kPa (0.3-2.5 bar or 4.35-36.25 psi), making it suitable for a variety of pressure monitoring applications.

Telemecanique Sensors

XMLB002A2S13

Telemecanique Sensors XMLB002A2S13 is an electromechanical pressure switch designed for regulating between two thresholds with an adjustable differential. It falls within the XML sub-range and features a zinc alloy case for durability. This model offers a fluid connection via 1/2”-14 NPT and 1/4" - 18 NPTF (female) ports. It operates with SPDT (Single Pole Double Throw) - 1C/O contacts, accommodating pressures ranging from 30-250kPa (0.3-2.5 bar or 4.35-36.25 psi).

Telemecanique Sensors