Inclination Sensors

B2NF85H-QR20-2UPN6X3-H1141

Dynamic Inclinometer, , Rectangular, plastic, Ultem, Status displayed via LED, Angle detection via two axis with ±85 ° measuring range and two freely configurable switching outputs (PNP/NPN), High protection class IP68/IP69K, Protected against salt spray and rapid temperature change, 10…30 V DC, Male connector, M12 × 1, 4-pin, Parameterization via IO-Link with USB-2-IOL-0002

Turck

B2N60H-QR20-2LI2X3-H1151

Inclinometer, Operating voltage 15…30 VDC, Rectangular, plastic, Ultem, Status displayed via LED, Angle detection along two axes with ±60 ° measuring range, High protection class IP68/IP69K, Protected against salt spray and rapid temperature change, 15…30 VDC, M12 × 1 male connector, 5-pin, Analog output 4…20 mA, The center point of the measuring range can be adjusted using teach adaptor TX1-Q20L60, Individual parameterization possible with USB-2-IOL-0002

Turck

B2NF25H-QR20-2LI2X3-H1151

Dynamic Inclinometer, Operating voltage 15…30 VDC, Rectangular, plastic, Ultem, Status displayed via LED, Angle detection along two axes with ±25 ° measuring range, High protection class IP68/IP69K, Protected against salt spray and rapid temperature change, 15…30 VDC, M12 × 1 male connector, 5-pin, Analog output 4…20 mA, The center point of the measuring range can be adjusted using teach adaptor TX1-Q20L60, Individual parameterization possible with USB-2-IOL-0002

Turck

B1N360V-Q20L60-2LU3-H1151/S1217

Inclinometer, with increased damping, Vertical, Rectangular, plastic, PC, Compact housing, Connection via M12 × 1 male, Response time 1 s, Cutoff frequency 6 Hz, Measuring range adjustable via teach adapter TX1-Q20L60, 10…30 VDC, Two counter-running 0.1 … 4.9 V analog outputs improve machine safety through redundancy

Turck

B2N10H-Q42-CNX2-2H1150

Inclinometer, With CANopen Interface, , Rectangular, height 42 mm, Plastic, PA12-GF30, Convenient CANopen interface, Fulfills CiA DS‐301, CiA DSP‐410, High resolution and accuracy, Baud rates of 10 kbps up to 1 Mbps, High sampling rate and bandwidth, Parameterizable vibration suppression, One TPDO (RTR, cyclic, event-controlled, synchronized), Configuration via SDO and object directory, SYNC load (synchronized transmission of TPDO after reception of SYNC telegram), EMCY producer (inclination, in

Turck

B2N45H-Q20L60-2LU3-H1151/S1248

Inclinometer, Vertical, Rectangular, plastic, PC, Compact housing, Connection via M12 × 1 male, Zero point calibration +/‐ 15°, Two analog outputs, Male M12 x 1

Turck

B2N60H-Q20L60-2LI2-H1151

Inclinometer, , Plastic, PC, Zero point calibration +/‐ 15°, Two analog outputs, M12 x 1 male connector

Turck

B1N360V-Q20L60-2LI2-H1151/S1216

Inclinometer, mit erhöhter Dämpfung, Vertical, Rectangular, plastic, PC, Compact housing, Connection via M12 × 1 male, Response time 0.5 s, Cutoff frequency 6 Hz, Measuring range adjustable via teach adapter TX1-Q20L60, 10…30 VDC, Two counter-running 4 … 20mA analog outputs improve machine safety through redundancy

Turck

B2N85H-Q20L60-2LU3-H1151/S97

Inclinometer, With Increased Temperature Range, , Plastic, PC, Zero point calibration +/‐ 15°, Two analog outputs, M12 x 1 male connector

Turck

B1NF360V-QR20-2LI2X3-H1151

Dynamic Inclinometer, Operating voltage 15…30 VDC, Rectangular, plastic, Ultem, Status displayed via LED, Angle detection via one axis with 360 ° measuring range, High protection class IP68/IP69K, Protected against salt spray and rapid temperature change, 15…30 VDC, M12 × 1 male connector, 5-pin, Two counter-running 4…20 mA analog outputs improve machine safety through redundancy, The start, end and center point of the measuring range can be adjusted using teach adaptor TX1-Q20L60, Individual pa

Turck

B2N45H-QR20-2LI2X3-H1151

Inclinometer, Operating voltage 15…30 VDC, Rectangular, plastic, Ultem, Status displayed via LED, Angle detection along two axes with ±45 ° measuring range, High protection class IP68/IP69K, Protected against salt spray and rapid temperature change, 15…30 VDC, M12 × 1 male connector, 5-pin, Analog output 4…20 mA, The center point of the measuring range can be adjusted using teach adaptor TX1-Q20L60, Individual parameterization possible with USB-2-IOL-0002

Turck

B2NF45H-QR20-2LI2X3-H1151

Dynamic Inclinometer, Operating voltage 15…30 VDC, Rectangular, plastic, Ultem, Status displayed via LED, Angle detection along two axes with ±45 ° measuring range, High protection class IP68/IP69K, Protected against salt spray and rapid temperature change, 15…30 VDC, M12 × 1 male connector, 5-pin, Analog output 4…20 mA, The center point of the measuring range can be adjusted using teach adaptor TX1-Q20L60, Individual parameterization possible with USB-2-IOL-0002

Turck

B2N85H-Q20L60-2LI2-H1151

Inclinometer, , Plastic, PC, Zero point calibration +/‐ 15°, Two analog outputs, M12 x 1 male connector

Turck

B2N10H-Q20L60-2LU3-H1151

Inclinometer, , Plastic, PC, Zero point calibration +/‐ 5°, Two analog outputs, M12 x 1 male connector

Turck

B2N5H-Q20L60-2LI2-H1151

Inclinometer, , Plastic, PC, Zero point calibration +/‐ 2°, Two analog outputs, M12 x 1 male connector

Turck

B2N45H-Q20L60-2LI2-H1151/S97

Inclinometer, With Increased Temperature Range, , Plastic, PC, For temperatures up to - 40 °C, Zero point calibration +/‐ 15°, Two analog outputs, M12 x 1 male connector

Turck

B1NF360V-QR20-2UPN6X3-H1141

Dynamic Inclinometer, , Rectangular, plastic, Ultem, Status displayed via LED, Angle detection via one axis with 360 ° measuring range and two freely configurable switching outputs (PNP/NPN), High protection class IP68/IP69K, Protected against salt spray and rapid temperature change, 10…30 V DC, Male connector, M12 × 1, 4-pin, Parameterization via IO-Link with USB-2-IOL-0002

Turck

B1N360V-QR20-2LI2X3-H1151

Inclinometer, Operating voltage 15…30 VDC, Rectangular, plastic, Ultem, Status displayed via LED, Angle detection via one axis with 360 ° measuring range, High protection class IP68/IP69K, Protected against salt spray and rapid temperature change, 15…30 VDC, M12 × 1 male connector, 5-pin, Two counter-running 4…20 mA analog outputs improve machine safety through redundancy, The start, end and center point of the measuring range can be adjusted using teach adaptor TX1-Q20L60, Individual parameteri

Turck

B2NF10H-QR20-2LI2X3-H1151

Dynamic Inclinometer, Operating voltage 15…30 VDC, Rectangular, plastic, Ultem, Status displayed via LED, Angle detection along two axes with ±10 ° measuring range, High protection class IP68/IP69K, Protected against salt spray and rapid temperature change, 15…30 VDC, M12 × 1 male connector, 5-pin, Analog output 4…20 mA, The center point of the measuring range can be adjusted using teach adaptor TX1-Q20L60, Individual parameterization possible with USB-2-IOL-0002

Turck

B2NF85H-QR20-2LI2X3-H1151

Dynamic Inclinometer, Operating voltage 15…30 VDC, Rectangular, plastic, Ultem, Status displayed via LED, Angle detection along two axes with ±85 ° measuring range, High protection class IP68/IP69K, Protected against salt spray and rapid temperature change, 15…30 VDC, M12 × 1 male connector, 5-pin, Analog output 4…20 mA, The center point of the measuring range can be adjusted using teach adaptor TX1-Q20L60, Individual parameterization possible with USB-2-IOL-0002

Turck