816-104

WAGO 816-104 is an automation part with a short circuit breaking rating and electrical data ratings per IEC/EN 60664-1, including a nominal voltage (III/3) of 320V, rated impulse voltage (III/3) of 4kV, rated voltage (III/2) of 320V, rated impulse voltage (III/2) of 4kV, nominal voltage (II/2) of 630V, rated surge voltage (II/2) of 4kV, and a rated current of 14A. It has UL 1059 approval with rated voltages of 300V and rated currents of 10A for UL Use Groups B and D, and CSA approval with rated voltages of 300V and rated currents of 8A for CSA Use Group B and 10A for Use Group D. The part features 8 connection points, 4 total number of potentials, 1 connection type, and 2 levels. The push-in CAGE CLAMP connection technology requires an operating tool, supports solid and fine-stranded conductors from 0.2 to 1.5mm2 (24 to 16 AWG), and has a strip length of 9 to 10mm (0.35 to 0.39 inches). The conductor connection direction to PCB is 45 degrees with a pole number of 4. Physical specifications include a pin spacing of 5mm (0.197 inches), width of 21.5mm (0.846 inches), height of 20.1mm (0.791 inches), height from the surface of 16.6mm (0.654 inches), depth of 17mm (0.669 inches), solder pin length of 3.5mm, solder pin dimensions of 0.8 x 0.5mm, and a drilled hole diameter with tolerance of 1.1 (+0.1)mm. The PCB contact is THT with solder pin arrangement over the entire terminal strip (in-line) and one solder pin per potential. It is made of gray Polyamide (PA66) with a flammability class per UL94 of V0, chrome-nickel spring steel (CrNi) clamping spring, copper alloy contact material, tin contact plating, and weighs 4.9g. The part operates within a temperature range of -60 to +105°C, is RoHS compliant without exemption, and comes in a box packaging of 168 (84) pieces per unit. The country of origin is CH, with a GTIN of 4045454732097 and a customs tariff number of 85369010000.

WAGO

816-102

Verified stock: 0

WAGO 816-102 is an automation part with a short circuit breaking rating and electrical data compliant with IEC/EN 60664-1 standards. It features nominal voltages of 320V (III/3), 320V (III/2), and 630V (II/2), with rated impulse voltages of 4kV for both III/2 and III/3, and a rated surge voltage of 4kV for II/2. The rated current is 14A according to IEC/EN standards. Under UL 1059 approvals, it has rated voltages of 300V and rated currents of 10A for both Use Groups B and D, while CSA approvals indicate rated voltages of 300V and rated currents of 8A for Use Group B, and the same voltage with a rated current of 10A for Use Group D. The part includes 4 connection points, 2 total number of potentials, and 1 type of connection across 2 levels, utilizing Push-in CAGE CLAMP technology with an operating tool actuation type. It accommodates solid and fine-stranded conductors ranging from 0.2 to 1.5mm2 (24 to 16 AWG), with specific accommodations for fine-stranded conductors with insulated or uninsulated ferrules. The strip length for connections is 9 to 10mm (0.35 to 0.39 inches), and the conductor connection direction to PCB is at a 45-degree angle. Physical specifications include a pin spacing of 5mm (0.197 inches), width of 11.5mm (0.453 inches), height of 20.1mm (0.791 inches) with a height from the surface of 16.6mm (0.654 inches), and a depth of 17mm (0.669 inches). The solder pin length is 3.5mm, with dimensions of 0.8 x 0.5mm and a drilled hole diameter with tolerance of 1.1 (+0.1)mm. It features a THT PCB contact with an in-line solder pin arrangement and one solder pin per potential. The part is gray, made from Polyamide (PA66) with a flammability class of UL94 V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring, with copper alloy contacts plated in tin. It has a fire load of 0.052MJ and weighs 2.5g. The operational temperature range is from -60 to +105°C. It is categorized under Product Group 4 (Printed Circuit Connectors), with eClass 10.0 and 9.0 classifications of 27-44-04-01, and ETIM 8.0 and 7.0 classifications of EC002643. The packaging unit is 322 pieces per box, originating from CH, with a GTIN of 4045454732059 and a customs tariff number of 85369010000. It is RoHS compliant without exemptions.

WAGO

816-107

Verified stock: 0

WAGO 816-107 is an automation part with a short circuit breaking rating and electrical data ratings per IEC/EN 60664-1, including a nominal voltage (III/3) of 320V, rated impulse voltage (III/3) of 4kV, rated voltage (III/2) of 320V, rated impulse voltage (III/2) of 4kV, nominal voltage (II/2) of 630V, rated surge voltage (II/2) of 4kV, and a rated current of 14A. It has UL 1059 approval with rated voltages of 300V and rated currents of 10A for UL Use Groups B and D, and CSA approval with rated voltages of 300V and rated currents of 8A for CSA Use Group B. The part features 14 connection points, 7 total number of potentials, 1 connection type, 2 levels, and utilizes Push-in CAGE CLAMP technology with an operating tool actuation type. It supports solid and fine-stranded conductors ranging from 0.2 to 1.5mm2 (24 to 16 AWG), with strip length requirements of 9 to 10mm (0.35 to 0.39 inches) and a conductor connection direction to PCB of 45 degrees. The physical specifications include a pin spacing of 5mm (0.197 inches), width of 36.5mm (1.437 inches), height of 20.1mm (0.791 inches), depth of 17mm (0.669 inches), and a solder pin length of 3.5mm. It is made from Polyamide (PA66) with a flammability class of UL94 V0, and features chrome-nickel spring steel (CrNi) for the clamping spring, copper alloy for the contact material, and tin for the contact plating. The part operates within a temperature range of -60 to +105 degrees Celsius, is RoHS compliant with no exemption, and comes in a box packaging with a GTIN of 4045454732141.

WAGO

816-111

Verified stock: 0

WAGO 816-111 is an automation part with a short circuit breaking rating and electrical data ratings per IEC/EN 60664-1, including a nominal voltage (III/3) of 320V, rated impulse voltage (III/3) of 4kV, rated voltage (III/2) of 320V, rated impulse voltage (III/2) of 4kV, nominal voltage (II/2) of 630V, rated surge voltage (II/2) of 4kV, and a rated current of 14A. It has UL 1059 approval with rated voltages of 300V and rated currents of 10A for UL Use Groups B and D, and CSA approval with rated voltages of 300V and rated currents of 8A for CSA Use Group B. The part features 22 connection points, 11 total number of potentials, 1 connection type, 2 levels, and utilizes Push-in CAGE CLAMP technology with an operating tool actuation type. It supports solid and fine-stranded conductors ranging from 0.2 to 1.5mm2 (24 to 16 AWG), including fine-stranded conductors with both insulated and uninsulated ferrules, and specifies a strip length of 9 to 10mm (0.35 to 0.39 inches). The conductor connection direction to PCB is 45 degrees, with a pole number of 11. Physical specifications include a pin spacing of 5mm (0.197 inches), width of 56.5mm (2.224 inches), height of 20.1mm (0.791 inches), height from the surface of 16.6mm (0.654 inches), depth of 17mm (0.669 inches), solder pin length of 3.5mm, solder pin dimensions of 0.8 x 0.5mm, and a drilled hole diameter with tolerance of 1.1 (+0.1)mm. The PCB contact is THT with an in-line solder pin arrangement and one solder pin per potential. It is made of Polyamide (PA66) in gray color, with a flammability class per UL94 of V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring material and a copper alloy with tin plating for the contact material. The part has a fire load of 0.25MJ and weighs 13.1g. It operates within a temperature range of -60 to +105°C, is RoHS compliant without exemption, and comes in a box packaging with a quantity of 56 (28) pieces per unit. The country of origin is CH, with a GTIN of 4045454732226 and a customs tariff number of 85369010000.

WAGO

254-816

Verified stock: 0

WAGO - 254-816

WAGO

280-816

Verified stock: 0

Wago 280-816 is a carrier feed-through/thru terminal block designed for efficient connectivity. It features CAGE-CLAMP spring connections for secure attachment. This terminal block is rated for currents of 10A (IEC), 20A (UL), and 25A (CSA). It is designed as a 1-deck/level, pluggable-disconnect terminal with a net height of 6 kV and a rated impulse voltage (Uimp) of 5 mm. The net width accommodates 1 disconnect feed-through pole (1P), and it is suitable for mounting on DIN-35 rail (35 x 15 / 35 x 7.5). The terminal block is colored gray and has dimensions of H75mm x W5mm x D28mm. It is compatible with 0.08mm2 to 2.5mm2 fine stranded or solid conductors and #28AWG to #12AWG fine stranded or solid conductors. The cross-section is made from Polyamide (PA) 66. It includes 4-wires (2 clamps + 2 clamps) (2+2) for connections and operates at a voltage of 400 V (IEC), 600 V (UL), and 600 V (CSA).

WAGO

816-110

Verified stock: 0

WAGO 816-110 is an automation part with a short circuit breaking rating and electrical data adhering to IEC/EN 60664-1 standards, including a nominal voltage of 320V for overvoltage category III and pollution degree 3, as well as for category III/2, with a rated impulse voltage of 4kV. It supports a nominal voltage of 630V for overvoltage category II/2, with a rated surge voltage of 4kV, and a rated current of 14A. UL and CSA approvals are included, with ratings per UL 1059 for a rated voltage of 300V and rated current of 10A for Use Group B and D, and CSA ratings for a rated voltage of 300V and rated current of 8A for Use Group B and D. It features 20 connection points, 10 total number of potentials, and utilizes Push-in CAGE CLAMP technology for connections, supporting solid and fine-stranded conductors of various sizes. The part has a 45-degree conductor connection direction to PCB, a pole number of 10, and pin spacing of 5mm. Physical dimensions include a width of 51.5mm, height of 20.1mm, and depth of 17mm, with a solder pin length of 3.5mm. It is made from Polyamide (PA66) with a flammability class of V0, and features chrome-nickel spring steel for the clamping spring, and a copper alloy with tin plating for contacts. The part operates within a temperature range of -60 to +105°C, is RoHS compliant, and comes in a box packaging with a GTIN of 4045454732202.

WAGO

750-816/300-000

Verified stock: 0

Wago 750-816/300-000 is a Programmable Logic Controller (PLC) CPU unit designed for automation tasks. It operates on a supply voltage of 18-31.2Vdc via wiring, with a nominal voltage of 24Vdc, and does not require an AC supply voltage. This unit features a 9-pin D-sub connector for fieldbus connections, along with cage-clamp connections for both 2-pin system and 6-pin field configurations. It is designed to operate within an ambient air temperature range of 0°C to +55°C and can be stored in temperatures ranging from -25°C to +85°C. The CPU unit supports communication speeds from 150bit/s to 115.2kbit/s and utilizes the Modbus RTU and RS-232 communication protocols. It has an IP20 degree of protection and is housed in a polycarbonate (PC) / Polyamide (PA) 6.6 casing, measuring 100mm in height, 50.5mm in width, and 71.1mm in depth. The unit can manage up to 64 connections per node and 247 in fieldbus mode on the controller (master). It includes 8kB of non-volatile memory for software, 32kB for program memory, 32kB for data memory, and 512bytes for fieldbus input and output memory. The CPU unit is vibration resistant up to 4g and shock resistant up to 15g, according to EN 60068-2-6 and EN 60068-2-27, respectively. It has a control circuit rated current of 500mA at 24Vdc nominal load, 350mA at 5Vdc system supply, and 1650mA for system supply. The unit supports multiple programming languages, including Instruction List (IL), Ladder Diagram (LD), Function Block Diagram (FBD), Continuous Function Chart (CFC), Structured Text (ST), and Sequential Function Chart (SFC), through the WAGO-I/O-PRO V2.3 programming environment. It offers configuration options through WAGO-I/O-CHECK and includes a rotary encoder switch. The unit is designed to withstand up to 95% relative humidity, non-condensing, and is equipped with a 16-bit processor.

WAGO

816-104

Verified stock: 0

WAGO 816-104 is an automation part with a short circuit breaking rating and electrical data ratings per IEC/EN 60664-1, including a nominal voltage (III/3) of 320V, rated impulse voltage (III/3) of 4kV, rated voltage (III/2) of 320V, rated impulse voltage (III/2) of 4kV, nominal voltage (II/2) of 630V, rated surge voltage (II/2) of 4kV, and a rated current of 14A. It has UL 1059 approval with rated voltages of 300V and rated currents of 10A for UL Use Groups B and D, and CSA approval with rated voltages of 300V and rated currents of 8A for CSA Use Group B and 10A for Use Group D. The part features 8 connection points, 4 total number of potentials, 1 connection type, and 2 levels. The push-in CAGE CLAMP connection technology requires an operating tool, supports solid and fine-stranded conductors from 0.2 to 1.5mm2 (24 to 16 AWG), and has a strip length of 9 to 10mm (0.35 to 0.39 inches). The conductor connection direction to PCB is 45 degrees with a pole number of 4. Physical specifications include a pin spacing of 5mm (0.197 inches), width of 21.5mm (0.846 inches), height of 20.1mm (0.791 inches), height from the surface of 16.6mm (0.654 inches), depth of 17mm (0.669 inches), solder pin length of 3.5mm, solder pin dimensions of 0.8 x 0.5mm, and a drilled hole diameter with tolerance of 1.1 (+0.1)mm. The PCB contact is THT with solder pin arrangement over the entire terminal strip (in-line) and one solder pin per potential. It is made of gray Polyamide (PA66) with a flammability class per UL94 of V0, chrome-nickel spring steel (CrNi) clamping spring, copper alloy contact material, tin contact plating, and weighs 4.9g. The part operates within a temperature range of -60 to +105°C, is RoHS compliant without exemption, and comes in a box packaging of 168 (84) pieces per unit. The country of origin is CH, with a GTIN of 4045454732097 and a customs tariff number of 85369010000.

WAGO

816-102

Verified stock: 0

WAGO 816-102 is an automation part with a short circuit breaking rating and electrical data compliant with IEC/EN 60664-1 standards. It features nominal voltages of 320V (III/3), 320V (III/2), and 630V (II/2), with rated impulse voltages of 4kV for both III/2 and III/3, and a rated surge voltage of 4kV for II/2. The rated current is 14A according to IEC/EN standards. Under UL 1059 approvals, it has rated voltages of 300V and rated currents of 10A for both Use Groups B and D, while CSA approvals indicate rated voltages of 300V and rated currents of 8A for Use Group B, and the same voltage with a rated current of 10A for Use Group D. The part includes 4 connection points, 2 total number of potentials, and 1 type of connection across 2 levels, utilizing Push-in CAGE CLAMP technology with an operating tool actuation type. It accommodates solid and fine-stranded conductors ranging from 0.2 to 1.5mm2 (24 to 16 AWG), with specific accommodations for fine-stranded conductors with insulated or uninsulated ferrules. The strip length for connections is 9 to 10mm (0.35 to 0.39 inches), and the conductor connection direction to PCB is at a 45-degree angle. Physical specifications include a pin spacing of 5mm (0.197 inches), width of 11.5mm (0.453 inches), height of 20.1mm (0.791 inches) with a height from the surface of 16.6mm (0.654 inches), and a depth of 17mm (0.669 inches). The solder pin length is 3.5mm, with dimensions of 0.8 x 0.5mm and a drilled hole diameter with tolerance of 1.1 (+0.1)mm. It features a THT PCB contact with an in-line solder pin arrangement and one solder pin per potential. The part is gray, made from Polyamide (PA66) with a flammability class of UL94 V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring, with copper alloy contacts plated in tin. It has a fire load of 0.052MJ and weighs 2.5g. The operational temperature range is from -60 to +105°C. It is categorized under Product Group 4 (Printed Circuit Connectors), with eClass 10.0 and 9.0 classifications of 27-44-04-01, and ETIM 8.0 and 7.0 classifications of EC002643. The packaging unit is 322 pieces per box, originating from CH, with a GTIN of 4045454732059 and a customs tariff number of 85369010000. It is RoHS compliant without exemptions.

WAGO

816-107

Verified stock: 0

WAGO 816-107 is an automation part with a short circuit breaking rating and electrical data ratings per IEC/EN 60664-1, including a nominal voltage (III/3) of 320V, rated impulse voltage (III/3) of 4kV, rated voltage (III/2) of 320V, rated impulse voltage (III/2) of 4kV, nominal voltage (II/2) of 630V, rated surge voltage (II/2) of 4kV, and a rated current of 14A. It has UL 1059 approval with rated voltages of 300V and rated currents of 10A for UL Use Groups B and D, and CSA approval with rated voltages of 300V and rated currents of 8A for CSA Use Group B. The part features 14 connection points, 7 total number of potentials, 1 connection type, 2 levels, and utilizes Push-in CAGE CLAMP technology with an operating tool actuation type. It supports solid and fine-stranded conductors ranging from 0.2 to 1.5mm2 (24 to 16 AWG), with strip length requirements of 9 to 10mm (0.35 to 0.39 inches) and a conductor connection direction to PCB of 45 degrees. The physical specifications include a pin spacing of 5mm (0.197 inches), width of 36.5mm (1.437 inches), height of 20.1mm (0.791 inches), depth of 17mm (0.669 inches), and a solder pin length of 3.5mm. It is made from Polyamide (PA66) with a flammability class of UL94 V0, and features chrome-nickel spring steel (CrNi) for the clamping spring, copper alloy for the contact material, and tin for the contact plating. The part operates within a temperature range of -60 to +105 degrees Celsius, is RoHS compliant with no exemption, and comes in a box packaging with a GTIN of 4045454732141.

WAGO

816-111

Verified stock: 0

WAGO 816-111 is an automation part with a short circuit breaking rating and electrical data ratings per IEC/EN 60664-1, including a nominal voltage (III/3) of 320V, rated impulse voltage (III/3) of 4kV, rated voltage (III/2) of 320V, rated impulse voltage (III/2) of 4kV, nominal voltage (II/2) of 630V, rated surge voltage (II/2) of 4kV, and a rated current of 14A. It has UL 1059 approval with rated voltages of 300V and rated currents of 10A for UL Use Groups B and D, and CSA approval with rated voltages of 300V and rated currents of 8A for CSA Use Group B. The part features 22 connection points, 11 total number of potentials, 1 connection type, 2 levels, and utilizes Push-in CAGE CLAMP technology with an operating tool actuation type. It supports solid and fine-stranded conductors ranging from 0.2 to 1.5mm2 (24 to 16 AWG), including fine-stranded conductors with both insulated and uninsulated ferrules, and specifies a strip length of 9 to 10mm (0.35 to 0.39 inches). The conductor connection direction to PCB is 45 degrees, with a pole number of 11. Physical specifications include a pin spacing of 5mm (0.197 inches), width of 56.5mm (2.224 inches), height of 20.1mm (0.791 inches), height from the surface of 16.6mm (0.654 inches), depth of 17mm (0.669 inches), solder pin length of 3.5mm, solder pin dimensions of 0.8 x 0.5mm, and a drilled hole diameter with tolerance of 1.1 (+0.1)mm. The PCB contact is THT with an in-line solder pin arrangement and one solder pin per potential. It is made of Polyamide (PA66) in gray color, with a flammability class per UL94 of V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring material and a copper alloy with tin plating for the contact material. The part has a fire load of 0.25MJ and weighs 13.1g. It operates within a temperature range of -60 to +105°C, is RoHS compliant without exemption, and comes in a box packaging with a quantity of 56 (28) pieces per unit. The country of origin is CH, with a GTIN of 4045454732226 and a customs tariff number of 85369010000.

WAGO

254-816

Verified stock: 0

WAGO - 254-816

WAGO

280-816

Verified stock: 0

Wago 280-816 is a carrier feed-through/thru terminal block designed for efficient connectivity. It features CAGE-CLAMP spring connections for secure attachment. This terminal block is rated for currents of 10A (IEC), 20A (UL), and 25A (CSA). It is designed as a 1-deck/level, pluggable-disconnect terminal with a net height of 6 kV and a rated impulse voltage (Uimp) of 5 mm. The net width accommodates 1 disconnect feed-through pole (1P), and it is suitable for mounting on DIN-35 rail (35 x 15 / 35 x 7.5). The terminal block is colored gray and has dimensions of H75mm x W5mm x D28mm. It is compatible with 0.08mm2 to 2.5mm2 fine stranded or solid conductors and #28AWG to #12AWG fine stranded or solid conductors. The cross-section is made from Polyamide (PA) 66. It includes 4-wires (2 clamps + 2 clamps) (2+2) for connections and operates at a voltage of 400 V (IEC), 600 V (UL), and 600 V (CSA).

WAGO

816-110

Verified stock: 0

WAGO 816-110 is an automation part with a short circuit breaking rating and electrical data adhering to IEC/EN 60664-1 standards, including a nominal voltage of 320V for overvoltage category III and pollution degree 3, as well as for category III/2, with a rated impulse voltage of 4kV. It supports a nominal voltage of 630V for overvoltage category II/2, with a rated surge voltage of 4kV, and a rated current of 14A. UL and CSA approvals are included, with ratings per UL 1059 for a rated voltage of 300V and rated current of 10A for Use Group B and D, and CSA ratings for a rated voltage of 300V and rated current of 8A for Use Group B and D. It features 20 connection points, 10 total number of potentials, and utilizes Push-in CAGE CLAMP technology for connections, supporting solid and fine-stranded conductors of various sizes. The part has a 45-degree conductor connection direction to PCB, a pole number of 10, and pin spacing of 5mm. Physical dimensions include a width of 51.5mm, height of 20.1mm, and depth of 17mm, with a solder pin length of 3.5mm. It is made from Polyamide (PA66) with a flammability class of V0, and features chrome-nickel spring steel for the clamping spring, and a copper alloy with tin plating for contacts. The part operates within a temperature range of -60 to +105°C, is RoHS compliant, and comes in a box packaging with a GTIN of 4045454732202.

WAGO

750-816/300-000

Verified stock: 0

Wago 750-816/300-000 is a Programmable Logic Controller (PLC) CPU unit designed for automation tasks. It operates on a supply voltage of 18-31.2Vdc via wiring, with a nominal voltage of 24Vdc, and does not require an AC supply voltage. This unit features a 9-pin D-sub connector for fieldbus connections, along with cage-clamp connections for both 2-pin system and 6-pin field configurations. It is designed to operate within an ambient air temperature range of 0°C to +55°C and can be stored in temperatures ranging from -25°C to +85°C. The CPU unit supports communication speeds from 150bit/s to 115.2kbit/s and utilizes the Modbus RTU and RS-232 communication protocols. It has an IP20 degree of protection and is housed in a polycarbonate (PC) / Polyamide (PA) 6.6 casing, measuring 100mm in height, 50.5mm in width, and 71.1mm in depth. The unit can manage up to 64 connections per node and 247 in fieldbus mode on the controller (master). It includes 8kB of non-volatile memory for software, 32kB for program memory, 32kB for data memory, and 512bytes for fieldbus input and output memory. The CPU unit is vibration resistant up to 4g and shock resistant up to 15g, according to EN 60068-2-6 and EN 60068-2-27, respectively. It has a control circuit rated current of 500mA at 24Vdc nominal load, 350mA at 5Vdc system supply, and 1650mA for system supply. The unit supports multiple programming languages, including Instruction List (IL), Ladder Diagram (LD), Function Block Diagram (FBD), Continuous Function Chart (CFC), Structured Text (ST), and Sequential Function Chart (SFC), through the WAGO-I/O-PRO V2.3 programming environment. It offers configuration options through WAGO-I/O-CHECK and includes a rotary encoder switch. The unit is designed to withstand up to 95% relative humidity, non-condensing, and is equipped with a 16-bit processor.

WAGO

816-104

Verified stock: 0

WAGO 816-104 is an automation part with a short circuit breaking rating and electrical data ratings per IEC/EN 60664-1, including a nominal voltage (III/3) of 320V, rated impulse voltage (III/3) of 4kV, rated voltage (III/2) of 320V, rated impulse voltage (III/2) of 4kV, nominal voltage (II/2) of 630V, rated surge voltage (II/2) of 4kV, and a rated current of 14A. It has UL 1059 approval with rated voltages of 300V and rated currents of 10A for UL Use Groups B and D, and CSA approval with rated voltages of 300V and rated currents of 8A for CSA Use Group B and 10A for Use Group D. The part features 8 connection points, 4 total number of potentials, 1 connection type, and 2 levels. The push-in CAGE CLAMP connection technology requires an operating tool, supports solid and fine-stranded conductors from 0.2 to 1.5mm2 (24 to 16 AWG), and has a strip length of 9 to 10mm (0.35 to 0.39 inches). The conductor connection direction to PCB is 45 degrees with a pole number of 4. Physical specifications include a pin spacing of 5mm (0.197 inches), width of 21.5mm (0.846 inches), height of 20.1mm (0.791 inches), height from the surface of 16.6mm (0.654 inches), depth of 17mm (0.669 inches), solder pin length of 3.5mm, solder pin dimensions of 0.8 x 0.5mm, and a drilled hole diameter with tolerance of 1.1 (+0.1)mm. The PCB contact is THT with solder pin arrangement over the entire terminal strip (in-line) and one solder pin per potential. It is made of gray Polyamide (PA66) with a flammability class per UL94 of V0, chrome-nickel spring steel (CrNi) clamping spring, copper alloy contact material, tin contact plating, and weighs 4.9g. The part operates within a temperature range of -60 to +105°C, is RoHS compliant without exemption, and comes in a box packaging of 168 (84) pieces per unit. The country of origin is CH, with a GTIN of 4045454732097 and a customs tariff number of 85369010000.

WAGO

816-102

Verified stock: 0

WAGO 816-102 is an automation part with a short circuit breaking rating and electrical data compliant with IEC/EN 60664-1 standards. It features nominal voltages of 320V (III/3), 320V (III/2), and 630V (II/2), with rated impulse voltages of 4kV for both III/2 and III/3, and a rated surge voltage of 4kV for II/2. The rated current is 14A according to IEC/EN standards. Under UL 1059 approvals, it has rated voltages of 300V and rated currents of 10A for both Use Groups B and D, while CSA approvals indicate rated voltages of 300V and rated currents of 8A for Use Group B, and the same voltage with a rated current of 10A for Use Group D. The part includes 4 connection points, 2 total number of potentials, and 1 type of connection across 2 levels, utilizing Push-in CAGE CLAMP technology with an operating tool actuation type. It accommodates solid and fine-stranded conductors ranging from 0.2 to 1.5mm2 (24 to 16 AWG), with specific accommodations for fine-stranded conductors with insulated or uninsulated ferrules. The strip length for connections is 9 to 10mm (0.35 to 0.39 inches), and the conductor connection direction to PCB is at a 45-degree angle. Physical specifications include a pin spacing of 5mm (0.197 inches), width of 11.5mm (0.453 inches), height of 20.1mm (0.791 inches) with a height from the surface of 16.6mm (0.654 inches), and a depth of 17mm (0.669 inches). The solder pin length is 3.5mm, with dimensions of 0.8 x 0.5mm and a drilled hole diameter with tolerance of 1.1 (+0.1)mm. It features a THT PCB contact with an in-line solder pin arrangement and one solder pin per potential. The part is gray, made from Polyamide (PA66) with a flammability class of UL94 V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring, with copper alloy contacts plated in tin. It has a fire load of 0.052MJ and weighs 2.5g. The operational temperature range is from -60 to +105°C. It is categorized under Product Group 4 (Printed Circuit Connectors), with eClass 10.0 and 9.0 classifications of 27-44-04-01, and ETIM 8.0 and 7.0 classifications of EC002643. The packaging unit is 322 pieces per box, originating from CH, with a GTIN of 4045454732059 and a customs tariff number of 85369010000. It is RoHS compliant without exemptions.

WAGO

816-107

Verified stock: 0

WAGO 816-107 is an automation part with a short circuit breaking rating and electrical data ratings per IEC/EN 60664-1, including a nominal voltage (III/3) of 320V, rated impulse voltage (III/3) of 4kV, rated voltage (III/2) of 320V, rated impulse voltage (III/2) of 4kV, nominal voltage (II/2) of 630V, rated surge voltage (II/2) of 4kV, and a rated current of 14A. It has UL 1059 approval with rated voltages of 300V and rated currents of 10A for UL Use Groups B and D, and CSA approval with rated voltages of 300V and rated currents of 8A for CSA Use Group B. The part features 14 connection points, 7 total number of potentials, 1 connection type, 2 levels, and utilizes Push-in CAGE CLAMP technology with an operating tool actuation type. It supports solid and fine-stranded conductors ranging from 0.2 to 1.5mm2 (24 to 16 AWG), with strip length requirements of 9 to 10mm (0.35 to 0.39 inches) and a conductor connection direction to PCB of 45 degrees. The physical specifications include a pin spacing of 5mm (0.197 inches), width of 36.5mm (1.437 inches), height of 20.1mm (0.791 inches), depth of 17mm (0.669 inches), and a solder pin length of 3.5mm. It is made from Polyamide (PA66) with a flammability class of UL94 V0, and features chrome-nickel spring steel (CrNi) for the clamping spring, copper alloy for the contact material, and tin for the contact plating. The part operates within a temperature range of -60 to +105 degrees Celsius, is RoHS compliant with no exemption, and comes in a box packaging with a GTIN of 4045454732141.

WAGO

816-111

Verified stock: 0

WAGO 816-111 is an automation part with a short circuit breaking rating and electrical data ratings per IEC/EN 60664-1, including a nominal voltage (III/3) of 320V, rated impulse voltage (III/3) of 4kV, rated voltage (III/2) of 320V, rated impulse voltage (III/2) of 4kV, nominal voltage (II/2) of 630V, rated surge voltage (II/2) of 4kV, and a rated current of 14A. It has UL 1059 approval with rated voltages of 300V and rated currents of 10A for UL Use Groups B and D, and CSA approval with rated voltages of 300V and rated currents of 8A for CSA Use Group B. The part features 22 connection points, 11 total number of potentials, 1 connection type, 2 levels, and utilizes Push-in CAGE CLAMP technology with an operating tool actuation type. It supports solid and fine-stranded conductors ranging from 0.2 to 1.5mm2 (24 to 16 AWG), including fine-stranded conductors with both insulated and uninsulated ferrules, and specifies a strip length of 9 to 10mm (0.35 to 0.39 inches). The conductor connection direction to PCB is 45 degrees, with a pole number of 11. Physical specifications include a pin spacing of 5mm (0.197 inches), width of 56.5mm (2.224 inches), height of 20.1mm (0.791 inches), height from the surface of 16.6mm (0.654 inches), depth of 17mm (0.669 inches), solder pin length of 3.5mm, solder pin dimensions of 0.8 x 0.5mm, and a drilled hole diameter with tolerance of 1.1 (+0.1)mm. The PCB contact is THT with an in-line solder pin arrangement and one solder pin per potential. It is made of Polyamide (PA66) in gray color, with a flammability class per UL94 of V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring material and a copper alloy with tin plating for the contact material. The part has a fire load of 0.25MJ and weighs 13.1g. It operates within a temperature range of -60 to +105°C, is RoHS compliant without exemption, and comes in a box packaging with a quantity of 56 (28) pieces per unit. The country of origin is CH, with a GTIN of 4045454732226 and a customs tariff number of 85369010000.

WAGO

816-106 WAGO Automation components

Part#:816-106

Manufacturer:WAGO

Product condition

We're always improving how we show product data for you! 🙌

Relevant products

816-104

816-102

816-107

816-111

254-816

280-816

816-110

750-816/300-000

816-104

816-102

816-107

816-111

254-816

280-816

816-110

750-816/300-000

816-104

816-102

816-107

816-111

We are a proud member of: