289-526

Wago 289-526 is an interface unit designed with a DIN 41612 (Type C) 64-pin male connector for system integration and a 2-row spring cage-clamp 64-pin for connecting 0.08...2.5mm2 cables in the field. It has a rated current of 1A and a rated voltage of 125Vdc. This interface module is housed in a mounting carrier, operates within an ambient air temperature range of -20°C to +50°C for operation and -40°C to +70°C for storage. It does not specify a supply voltage (AC), control voltage (DC), or speed. The degree of protection is IP20, with a rated impulse voltage of 100Vac and a rated insulation voltage of 171mm. The unit's dimensions are H85mm x W171mm x D34mm, designed for mounting on a DIN-35 rail (vertical). It supports a communication protocol with an 85% relative humidity (non-condensing) tolerance.

WAGO

289-720

Verified stock: 0

Wago 289-720 is an interface unit designed with a 9-pin D-sub male connector for system integration and a double-deck spring cage-clamp 10-pin for connecting 0.08...2.5mm2 cables in the field. It supports a rated current of 2A and a rated voltage of 50Vdc. The unit features a solder pin design, a shielded connection, and is mounted in a carrier. It operates without a specified supply voltage (AC), within an ambient air temperature range of -20°C to +50°C for operation and -40°C to +70°C for storage. The interface unit does not specify a control voltage (DC), but it has a rated impulse voltage of 30Vac and a rated insulation voltage of 33.5mm. Its dimensions are H85mm x W33.5mm x D48mm, designed for vertical mounting on a DIN-35 rail. The response time, number of available modules, and coating material are not specified beyond an 85% relative humidity (non-condensing) environment tolerance.

WAGO

289-151

Verified stock: 0

Wago 289-151 is an interface unit designed as a component module featuring CAGE-CLAMP spring connections. It is equipped with 20 diodes (EM513) on a stand-alone PCB with mounting feet. This unit does not specify a supply voltage in AC but operates within an ambient air temperature range for operation from -25°C to +40°C and has a similar range for storage. It supports a rated voltage of 250Vdc for DC applications and is compatible with a 250Vac communication protocol. The physical dimensions are highlighted by a cross-section of H50mm x W69mm x D52mm, and it is designed for mounting on a DIN-35 rail. The housing material is Polyamide (PA) 66, ensuring compatibility with the specified environmental conditions.

WAGO

289-613

Verified stock: 0

Wago 289-613 is an interface unit designed with a DIN 41651 16-pin male connector for system integration and a double-deck spring cage-clamp 16-pin for connecting 0.08...2.5mm2 cables in the field. It operates with a rated current of 1A and a rated voltage of 125Vdc. This part is housed in a mounting carrier, suitable for operation in ambient air temperatures ranging from -20°C to +55°C and for storage in temperatures from -40°C to +70°C. The interface unit does not specify a supply voltage (AC), speed, control voltage (DC), or communication protocol but is designed with an IP20 degree of protection. It has a rated impulse voltage of 100Vac and a rated insulation voltage of 45 mm. The unit's dimensions are H85mm x W45mm x D48mm, designed for vertical mounting on a DIN-35 rail. It features a response time suitable for applications requiring up to 85% relative humidity, non-condensing, without specifying the exact value.

WAGO

289-652

Verified stock: 0

Wago 289-652 is an interface unit designed with a 25-pin D-sub female connector for system integration and a double-deck spring cage-clamp 26-pin for connecting 0.08...2.5mm2 cables in the field. It supports a rated current of 2A and a rated voltage of 125Vdc. The design features a shielded connection within a mounting carrier. Although it does not specify a supply voltage in AC, it operates within an ambient air temperature range of -20°C to +50°C and has a storage temperature range of -40°C to +70°C. The degree of protection is marked as IP20, with a rated impulse voltage of 125Vac and a rated insulation voltage of 68.5mm. The unit's dimensions are H85mm x W68.5mm x D48mm, designed for mounting on a DIN-35 rail vertically. It is specified for use in environments with up to 85% relative humidity, non-condensing.

WAGO

This item can ship within 24h!

216-289

$0.56

Verified stock: 300

Wago 216-289 is an insulated ferrule designed for 1 x 10mm2 conductor with a length of 20mm. It features a 7.6mm insulated collar and a 4.5mm ferrule. The power consumption is indicated by red.

WAGO

289-442

Verified stock: 0

WAGO - 289-442

WAGO

289-502

Verified stock: 0

Wago 289-502 is an interface unit designed with a DIN 41651 14-pin male connector for the system side and a 2-row spring cage-clamp 14-pin for connecting 0.08...2.5mm2 cables on the field side. It has a rated current of 1A and a rated voltage of 125Vdc. This interface module is housed in a mounting carrier, suitable for operation in ambient air temperatures ranging from -20°C to +55°C and for storage in temperatures from -40°C to +70°C. It features a degree of protection IP20, with a rated impulse voltage of 100Vac and a rated insulation voltage of 43mm. The unit's dimensions are H85mm x W43mm x D36mm, designed to be mounted on a DIN-35 rail vertically. It supports a control voltage of DC, although the specific value is denoted as 'C', which might be a placeholder. The response time, number of available modules, and coating material specifications seem to be incorrectly or incompletely listed, focusing instead on the unit's physical dimensions and environmental tolerance, such as 85% relative humidity non-condensing.

WAGO

289-526

Verified stock: 0

Wago 289-526 is an interface unit designed with a DIN 41612 (Type C) 64-pin male connector for system integration and a 2-row spring cage-clamp 64-pin for connecting 0.08...2.5mm2 cables in the field. It has a rated current of 1A and a rated voltage of 125Vdc. This interface module is housed in a mounting carrier, operates within an ambient air temperature range of -20°C to +50°C for operation and -40°C to +70°C for storage. It does not specify a supply voltage (AC), control voltage (DC), or speed. The degree of protection is IP20, with a rated impulse voltage of 100Vac and a rated insulation voltage of 171mm. The unit's dimensions are H85mm x W171mm x D34mm, designed for mounting on a DIN-35 rail (vertical). It supports a communication protocol with an 85% relative humidity (non-condensing) tolerance.

WAGO

289-720

Verified stock: 0

Wago 289-720 is an interface unit designed with a 9-pin D-sub male connector for system integration and a double-deck spring cage-clamp 10-pin for connecting 0.08...2.5mm2 cables in the field. It supports a rated current of 2A and a rated voltage of 50Vdc. The unit features a solder pin design, a shielded connection, and is mounted in a carrier. It operates without a specified supply voltage (AC), within an ambient air temperature range of -20°C to +50°C for operation and -40°C to +70°C for storage. The interface unit does not specify a control voltage (DC), but it has a rated impulse voltage of 30Vac and a rated insulation voltage of 33.5mm. Its dimensions are H85mm x W33.5mm x D48mm, designed for vertical mounting on a DIN-35 rail. The response time, number of available modules, and coating material are not specified beyond an 85% relative humidity (non-condensing) environment tolerance.

WAGO

289-151

Verified stock: 0

Wago 289-151 is an interface unit designed as a component module featuring CAGE-CLAMP spring connections. It is equipped with 20 diodes (EM513) on a stand-alone PCB with mounting feet. This unit does not specify a supply voltage in AC but operates within an ambient air temperature range for operation from -25°C to +40°C and has a similar range for storage. It supports a rated voltage of 250Vdc for DC applications and is compatible with a 250Vac communication protocol. The physical dimensions are highlighted by a cross-section of H50mm x W69mm x D52mm, and it is designed for mounting on a DIN-35 rail. The housing material is Polyamide (PA) 66, ensuring compatibility with the specified environmental conditions.

WAGO

289-613

Verified stock: 0

Wago 289-613 is an interface unit designed with a DIN 41651 16-pin male connector for system integration and a double-deck spring cage-clamp 16-pin for connecting 0.08...2.5mm2 cables in the field. It operates with a rated current of 1A and a rated voltage of 125Vdc. This part is housed in a mounting carrier, suitable for operation in ambient air temperatures ranging from -20°C to +55°C and for storage in temperatures from -40°C to +70°C. The interface unit does not specify a supply voltage (AC), speed, control voltage (DC), or communication protocol but is designed with an IP20 degree of protection. It has a rated impulse voltage of 100Vac and a rated insulation voltage of 45 mm. The unit's dimensions are H85mm x W45mm x D48mm, designed for vertical mounting on a DIN-35 rail. It features a response time suitable for applications requiring up to 85% relative humidity, non-condensing, without specifying the exact value.

WAGO

289-652

Verified stock: 0

Wago 289-652 is an interface unit designed with a 25-pin D-sub female connector for system integration and a double-deck spring cage-clamp 26-pin for connecting 0.08...2.5mm2 cables in the field. It supports a rated current of 2A and a rated voltage of 125Vdc. The design features a shielded connection within a mounting carrier. Although it does not specify a supply voltage in AC, it operates within an ambient air temperature range of -20°C to +50°C and has a storage temperature range of -40°C to +70°C. The degree of protection is marked as IP20, with a rated impulse voltage of 125Vac and a rated insulation voltage of 68.5mm. The unit's dimensions are H85mm x W68.5mm x D48mm, designed for mounting on a DIN-35 rail vertically. It is specified for use in environments with up to 85% relative humidity, non-condensing.

WAGO

This item can ship within 24h!

216-289

$0.56

Verified stock: 300

Wago 216-289 is an insulated ferrule designed for 1 x 10mm2 conductor with a length of 20mm. It features a 7.6mm insulated collar and a 4.5mm ferrule. The power consumption is indicated by red.

WAGO

289-442

Verified stock: 0

WAGO - 289-442

WAGO

289-502

Verified stock: 0

Wago 289-502 is an interface unit designed with a DIN 41651 14-pin male connector for the system side and a 2-row spring cage-clamp 14-pin for connecting 0.08...2.5mm2 cables on the field side. It has a rated current of 1A and a rated voltage of 125Vdc. This interface module is housed in a mounting carrier, suitable for operation in ambient air temperatures ranging from -20°C to +55°C and for storage in temperatures from -40°C to +70°C. It features a degree of protection IP20, with a rated impulse voltage of 100Vac and a rated insulation voltage of 43mm. The unit's dimensions are H85mm x W43mm x D36mm, designed to be mounted on a DIN-35 rail vertically. It supports a control voltage of DC, although the specific value is denoted as 'C', which might be a placeholder. The response time, number of available modules, and coating material specifications seem to be incorrectly or incompletely listed, focusing instead on the unit's physical dimensions and environmental tolerance, such as 85% relative humidity non-condensing.

WAGO

289-526

Verified stock: 0

Wago 289-526 is an interface unit designed with a DIN 41612 (Type C) 64-pin male connector for system integration and a 2-row spring cage-clamp 64-pin for connecting 0.08...2.5mm2 cables in the field. It has a rated current of 1A and a rated voltage of 125Vdc. This interface module is housed in a mounting carrier, operates within an ambient air temperature range of -20°C to +50°C for operation and -40°C to +70°C for storage. It does not specify a supply voltage (AC), control voltage (DC), or speed. The degree of protection is IP20, with a rated impulse voltage of 100Vac and a rated insulation voltage of 171mm. The unit's dimensions are H85mm x W171mm x D34mm, designed for mounting on a DIN-35 rail (vertical). It supports a communication protocol with an 85% relative humidity (non-condensing) tolerance.

WAGO

289-720

Verified stock: 0

Wago 289-720 is an interface unit designed with a 9-pin D-sub male connector for system integration and a double-deck spring cage-clamp 10-pin for connecting 0.08...2.5mm2 cables in the field. It supports a rated current of 2A and a rated voltage of 50Vdc. The unit features a solder pin design, a shielded connection, and is mounted in a carrier. It operates without a specified supply voltage (AC), within an ambient air temperature range of -20°C to +50°C for operation and -40°C to +70°C for storage. The interface unit does not specify a control voltage (DC), but it has a rated impulse voltage of 30Vac and a rated insulation voltage of 33.5mm. Its dimensions are H85mm x W33.5mm x D48mm, designed for vertical mounting on a DIN-35 rail. The response time, number of available modules, and coating material are not specified beyond an 85% relative humidity (non-condensing) environment tolerance.

WAGO

289-151

Verified stock: 0

Wago 289-151 is an interface unit designed as a component module featuring CAGE-CLAMP spring connections. It is equipped with 20 diodes (EM513) on a stand-alone PCB with mounting feet. This unit does not specify a supply voltage in AC but operates within an ambient air temperature range for operation from -25°C to +40°C and has a similar range for storage. It supports a rated voltage of 250Vdc for DC applications and is compatible with a 250Vac communication protocol. The physical dimensions are highlighted by a cross-section of H50mm x W69mm x D52mm, and it is designed for mounting on a DIN-35 rail. The housing material is Polyamide (PA) 66, ensuring compatibility with the specified environmental conditions.

WAGO

289-613

Verified stock: 0

Wago 289-613 is an interface unit designed with a DIN 41651 16-pin male connector for system integration and a double-deck spring cage-clamp 16-pin for connecting 0.08...2.5mm2 cables in the field. It operates with a rated current of 1A and a rated voltage of 125Vdc. This part is housed in a mounting carrier, suitable for operation in ambient air temperatures ranging from -20°C to +55°C and for storage in temperatures from -40°C to +70°C. The interface unit does not specify a supply voltage (AC), speed, control voltage (DC), or communication protocol but is designed with an IP20 degree of protection. It has a rated impulse voltage of 100Vac and a rated insulation voltage of 45 mm. The unit's dimensions are H85mm x W45mm x D48mm, designed for vertical mounting on a DIN-35 rail. It features a response time suitable for applications requiring up to 85% relative humidity, non-condensing, without specifying the exact value.

WAGO

289-103 WAGO Automation components

Part#:289-103

Manufacturer:WAGO

Product condition

We're always improving how we show product data for you! 🙌

Relevant products

289-526

289-720

289-151

289-613

289-652

216-289

289-442

289-502

289-526

289-720

289-151

289-613

289-652

216-289

289-442

289-502

289-526

289-720

289-151

289-613

We are a proud member of: