Name: 2116-5307
Brand: WAGO

This item can ship within 24h!

2116-5204

$310.00

Wago 2116-5204 is a neutral-through terminal block designed for efficient connectivity, featuring Push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 76A (IEC), 90A (IEC), 85A (UL), 78A (CSA), 76A (Ex e II), and 65A (Ex e II with jumper). This 1-deck terminal has a lever and button, side and center marking slots, and is suitable for Ex e II / Ex I applications, equipped with a test port. The terminal is designed for a net height of 8 kV, with a rated impulse voltage (Uimp) of 12 mm, and a net width for a neutral-through pole (N). It mounts on a DIN-35 rail and features a blue and orange actuator. The dimensions are H91.5mm x W12mm x D37.1mm, accommodating wire sizes from 0.5mm2 to 25mm2 for fine stranded conductors and 0.5mm2 to 16mm2 for solid conductors, including #20AWG to #4AWG for fine stranded conductors and #20AWG to #6AWG for solid conductors. The terminal has a 16mm2 nominal cross-section for the main feed-through conductor. Made from Polyamide (PA) 66, it includes 2-wires (1 push-in + 1 push-in) for normally closed (NC) auxiliary contacts. The terminal operates at a voltage of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2116-5207

$697.00

Verified stock: 40

Wago 2116-5207 is a ground/earthing terminal block designed for secure and efficient connections. It features push-in CAGE CLAMP spring connections for easy installation and a 1-deck/level design with a lever and button, including side and center marking slots and a test port. The terminal is rated for an impulse voltage of 12 mm and has a net width for 1 grounding / protective-earth (1PE) connection. It is compatible with DIN-35 rail mounting (35 x 15 / 35 x 7.5) and showcases a green-yellow and orange actuator. The terminal block is designed to accommodate 0.5mm2 to 25mm2 fine stranded conductors, 0.5mm2 to 16mm2 solid conductors, #20AWG to #4AWG fine stranded conductors, and #20AWG to #6AWG solid conductors, with a 16mm2 nominal cross-section of the main feed-through conductor. The dimensions are H91.5mm x W12mm x D37.1mm, made from Polyamide (PA) 66, and it supports 2-wires (1 push-in + 1 push-in) (1+1) for normally closed (NC) auxiliary contacts. This terminal block is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2116-1301

$464.00

Verified stock: 40

Wago 2116-1301 is a feed-through terminal block designed for efficient wire connection and distribution. It features push-in CAGE CLAMP spring connections for secure and maintenance-free wire termination. This terminal block is rated for currents up to 76A (IEC), 90A (IEC), 85A (UL), 78A (CSA), 76A (Ex e II), and 65A (Ex e II with jumper). It is designed with a single deck and includes a lever, side and center marking slots, and a test port, making it suitable for Ex e II applications. The terminal block has a net height of 8 kV for rated impulse voltage (Uimp) and measures 12 mm in width, supporting a control voltage for DIN-35 rail mounting. It comes in gray with an orange actuator, and its dimensions are H113.5mm x W12mm x D36.9mm. This terminal block accommodates wire sizes from 0.5mm2 to 25mm2 for fine stranded conductors and 0.5mm2 to 16mm2 for solid conductors, including #20AWG to #4AWG for fine stranded conductors and #20AWG to #6AWG for solid conductors, with a 16mm2 nominal cross-section for the main feed-through conductor. The material used is Polyamide (PA) 66, and it features 3-wire connections (1 push-in + 2 push-in) for normally closed (NC) auxiliary contacts. The terminal block is rated for voltages up to 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2116-1204

$298.00

Verified stock: 40

Wago 2116-1204 is a neutral-through terminal block designed for efficient connectivity with push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 76A (IEC), 90A (IEC), 85A (UL), 78A (CSA), 76A (Ex e II), and 65A (Ex e II with jumper). This terminal block is a 1-deck/level design featuring a lever, side and center marking slot, and a test port, making it suitable for Ex e II / Ex I applications. It has a net height of 8 kV for the rated impulse voltage (Uimp) and a net width accommodating a neutral-through pole (N). Designed for mounting on DIN-35 rail (35 x 15 / 35 x 7.5), it comes in blue with an orange actuator. The dimensions are H91.5mm x W12mm x D36.9mm, supporting a wide range of conductor sizes from 0.5mm2 to 25mm2 for fine stranded conductors and 0.5mm2 to 16mm2 for solid conductors, including #20AWG to #4AWG for fine stranded conductors and #20AWG to #6AWG for solid conductors. The terminal block has a 16mm2 nominal cross-section for the main feed-through conductor. Made from Polyamide (PA) 66, it features 2-wires (1 push-in + 1 push-in) for normally closed (NC) auxiliary contacts. The terminal operates at a voltage rating of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2116-1201

$285.00

Verified stock: 40

Wago 2116-1201 is a feed-through terminal block designed for efficient wire connection and distribution. It features push-in CAGE CLAMP spring connections for quick and secure wire installation. This terminal block is rated for various currents: 76A (IEC), 90A (IEC), 85A (UL), 78A (CSA), 76A (Ex e II), and 65A (Ex e II with jumper). It is a 1-deck/level terminal with a lever, side and center marking slots, and a test port, making it suitable for Ex e II applications. The terminal has a net height of 8 kV for rated impulse voltage (Uimp) and measures 12 mm in width for a single feed-through pole (1P). It is designed to mount on a DIN-35 rail and comes in gray with an orange actuator. The dimensions are H91.5mm x W12mm x D36.9mm, accommodating wire sizes from 0.5mm2 to 25mm2 for fine stranded conductors and 0.5mm2 to 16mm2 for solid conductors, including #20AWG to #4AWG for fine stranded conductors and #20AWG to #6AWG for solid conductors. The terminal has a 16mm2 nominal cross-section for the main feed-through conductor. Constructed from Polyamide (PA) 66, it includes 2-wires (1 push-in + 1 push-in) for connections and is rated for voltages of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II). It is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2116-1304

$479.00

Verified stock: 40

Wago 2116-1304 is a neutral-through terminal block designed for efficient wire connection and distribution. It features push-in CAGE CLAMP spring connections for quick and secure wire installation. This terminal block is rated for currents up to 76A (IEC), 90A (IEC), 85A (UL), 78A (CSA), 76A (Ex e II), and 65A (Ex e II with jumper). It is designed with a single deck/level, includes a lever, and offers side and center marking slots for easy identification. The terminal block is suitable for Ex e II / Ex I applications and comes with a test port for convenience. It has a net height of 8 kV for impulse voltage, a width accommodating a neutral-through pole (N), and is mountable on a DIN-35 rail. The actuator colors are blue and orange, and the dimensions are H113.5mm x W12mm x D36.9mm. It accepts wire sizes from 0.5mm2 to 25mm2 for fine stranded conductors and 0.5mm2 to 16mm2 for solid conductors, including #20AWG to #4AWG for fine stranded conductors and #20AWG to #6AWG for solid conductors, with a 16mm2 nominal cross-section for the main feed-through conductor. The terminal block is made from Polyamide (PA) 66, supports 3-wires (1 push-in + 2 push-in) connections, and operates at voltages up to 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II). It is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2116-1292

$78.00

Verified stock: 50

Wago 2116-1292 is an end plate designed for use as both an end and intermediate plate in electrical installations. It features a rated impulse voltage (Uimp) of 1 mm and is characterized by its orange color. The dimensions of this part are H91mm x W1mm x D36.5mm, indicating its height, width, and depth respectively. It is made from Polyamide (PA) 66, ensuring compatibility with the TOPJOB S series. This part is specifically crafted to meet the requirements of electrical setups requiring precise end or intermediate plate solutions.

WAGO

This item can ship within 24h!

2116-1291

$62.00

Verified stock: 100

Wago 2116-1291 is an end plate designed for use as both an end and intermediate plate in electrical installations. It features a rated impulse voltage (Uimp) of 1 mm and is constructed from Polyamide (PA) 66, ensuring compatibility with the TOPJOB S series. The part is gray in color and has dimensions of H91mm x W1mm x D36.5mm, fitting seamlessly into the system it is designed for.

WAGO

This item can ship within 24h!

2116-5204

$310.00

Verified stock: 40

Wago 2116-5204 is a neutral-through terminal block designed for efficient connectivity, featuring Push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 76A (IEC), 90A (IEC), 85A (UL), 78A (CSA), 76A (Ex e II), and 65A (Ex e II with jumper). This 1-deck terminal has a lever and button, side and center marking slots, and is suitable for Ex e II / Ex I applications, equipped with a test port. The terminal is designed for a net height of 8 kV, with a rated impulse voltage (Uimp) of 12 mm, and a net width for a neutral-through pole (N). It mounts on a DIN-35 rail and features a blue and orange actuator. The dimensions are H91.5mm x W12mm x D37.1mm, accommodating wire sizes from 0.5mm2 to 25mm2 for fine stranded conductors and 0.5mm2 to 16mm2 for solid conductors, including #20AWG to #4AWG for fine stranded conductors and #20AWG to #6AWG for solid conductors. The terminal has a 16mm2 nominal cross-section for the main feed-through conductor. Made from Polyamide (PA) 66, it includes 2-wires (1 push-in + 1 push-in) for normally closed (NC) auxiliary contacts. The terminal operates at a voltage of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2116-5207

$697.00

Verified stock: 40

Wago 2116-5207 is a ground/earthing terminal block designed for secure and efficient connections. It features push-in CAGE CLAMP spring connections for easy installation and a 1-deck/level design with a lever and button, including side and center marking slots and a test port. The terminal is rated for an impulse voltage of 12 mm and has a net width for 1 grounding / protective-earth (1PE) connection. It is compatible with DIN-35 rail mounting (35 x 15 / 35 x 7.5) and showcases a green-yellow and orange actuator. The terminal block is designed to accommodate 0.5mm2 to 25mm2 fine stranded conductors, 0.5mm2 to 16mm2 solid conductors, #20AWG to #4AWG fine stranded conductors, and #20AWG to #6AWG solid conductors, with a 16mm2 nominal cross-section of the main feed-through conductor. The dimensions are H91.5mm x W12mm x D37.1mm, made from Polyamide (PA) 66, and it supports 2-wires (1 push-in + 1 push-in) (1+1) for normally closed (NC) auxiliary contacts. This terminal block is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2116-1301

$464.00

Verified stock: 40

Wago 2116-1301 is a feed-through terminal block designed for efficient wire connection and distribution. It features push-in CAGE CLAMP spring connections for secure and maintenance-free wire termination. This terminal block is rated for currents up to 76A (IEC), 90A (IEC), 85A (UL), 78A (CSA), 76A (Ex e II), and 65A (Ex e II with jumper). It is designed with a single deck and includes a lever, side and center marking slots, and a test port, making it suitable for Ex e II applications. The terminal block has a net height of 8 kV for rated impulse voltage (Uimp) and measures 12 mm in width, supporting a control voltage for DIN-35 rail mounting. It comes in gray with an orange actuator, and its dimensions are H113.5mm x W12mm x D36.9mm. This terminal block accommodates wire sizes from 0.5mm2 to 25mm2 for fine stranded conductors and 0.5mm2 to 16mm2 for solid conductors, including #20AWG to #4AWG for fine stranded conductors and #20AWG to #6AWG for solid conductors, with a 16mm2 nominal cross-section for the main feed-through conductor. The material used is Polyamide (PA) 66, and it features 3-wire connections (1 push-in + 2 push-in) for normally closed (NC) auxiliary contacts. The terminal block is rated for voltages up to 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2116-1204

$298.00

Verified stock: 40

Wago 2116-1204 is a neutral-through terminal block designed for efficient connectivity with push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 76A (IEC), 90A (IEC), 85A (UL), 78A (CSA), 76A (Ex e II), and 65A (Ex e II with jumper). This terminal block is a 1-deck/level design featuring a lever, side and center marking slot, and a test port, making it suitable for Ex e II / Ex I applications. It has a net height of 8 kV for the rated impulse voltage (Uimp) and a net width accommodating a neutral-through pole (N). Designed for mounting on DIN-35 rail (35 x 15 / 35 x 7.5), it comes in blue with an orange actuator. The dimensions are H91.5mm x W12mm x D36.9mm, supporting a wide range of conductor sizes from 0.5mm2 to 25mm2 for fine stranded conductors and 0.5mm2 to 16mm2 for solid conductors, including #20AWG to #4AWG for fine stranded conductors and #20AWG to #6AWG for solid conductors. The terminal block has a 16mm2 nominal cross-section for the main feed-through conductor. Made from Polyamide (PA) 66, it features 2-wires (1 push-in + 1 push-in) for normally closed (NC) auxiliary contacts. The terminal operates at a voltage rating of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2116-1201

$285.00

Verified stock: 40

Wago 2116-1201 is a feed-through terminal block designed for efficient wire connection and distribution. It features push-in CAGE CLAMP spring connections for quick and secure wire installation. This terminal block is rated for various currents: 76A (IEC), 90A (IEC), 85A (UL), 78A (CSA), 76A (Ex e II), and 65A (Ex e II with jumper). It is a 1-deck/level terminal with a lever, side and center marking slots, and a test port, making it suitable for Ex e II applications. The terminal has a net height of 8 kV for rated impulse voltage (Uimp) and measures 12 mm in width for a single feed-through pole (1P). It is designed to mount on a DIN-35 rail and comes in gray with an orange actuator. The dimensions are H91.5mm x W12mm x D36.9mm, accommodating wire sizes from 0.5mm2 to 25mm2 for fine stranded conductors and 0.5mm2 to 16mm2 for solid conductors, including #20AWG to #4AWG for fine stranded conductors and #20AWG to #6AWG for solid conductors. The terminal has a 16mm2 nominal cross-section for the main feed-through conductor. Constructed from Polyamide (PA) 66, it includes 2-wires (1 push-in + 1 push-in) for connections and is rated for voltages of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II). It is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2116-1304

$479.00

Verified stock: 40

Wago 2116-1304 is a neutral-through terminal block designed for efficient wire connection and distribution. It features push-in CAGE CLAMP spring connections for quick and secure wire installation. This terminal block is rated for currents up to 76A (IEC), 90A (IEC), 85A (UL), 78A (CSA), 76A (Ex e II), and 65A (Ex e II with jumper). It is designed with a single deck/level, includes a lever, and offers side and center marking slots for easy identification. The terminal block is suitable for Ex e II / Ex I applications and comes with a test port for convenience. It has a net height of 8 kV for impulse voltage, a width accommodating a neutral-through pole (N), and is mountable on a DIN-35 rail. The actuator colors are blue and orange, and the dimensions are H113.5mm x W12mm x D36.9mm. It accepts wire sizes from 0.5mm2 to 25mm2 for fine stranded conductors and 0.5mm2 to 16mm2 for solid conductors, including #20AWG to #4AWG for fine stranded conductors and #20AWG to #6AWG for solid conductors, with a 16mm2 nominal cross-section for the main feed-through conductor. The terminal block is made from Polyamide (PA) 66, supports 3-wires (1 push-in + 2 push-in) connections, and operates at voltages up to 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II). It is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2116-1292

$78.00

Verified stock: 50

Wago 2116-1292 is an end plate designed for use as both an end and intermediate plate in electrical installations. It features a rated impulse voltage (Uimp) of 1 mm and is characterized by its orange color. The dimensions of this part are H91mm x W1mm x D36.5mm, indicating its height, width, and depth respectively. It is made from Polyamide (PA) 66, ensuring compatibility with the TOPJOB S series. This part is specifically crafted to meet the requirements of electrical setups requiring precise end or intermediate plate solutions.

WAGO

This item can ship within 24h!

2116-1291

$62.00

Verified stock: 100

Wago 2116-1291 is an end plate designed for use as both an end and intermediate plate in electrical installations. It features a rated impulse voltage (Uimp) of 1 mm and is constructed from Polyamide (PA) 66, ensuring compatibility with the TOPJOB S series. The part is gray in color and has dimensions of H91mm x W1mm x D36.5mm, fitting seamlessly into the system it is designed for.

WAGO

This item can ship within 24h!

2116-5204

$310.00

Verified stock: 40

Wago 2116-5204 is a neutral-through terminal block designed for efficient connectivity, featuring Push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 76A (IEC), 90A (IEC), 85A (UL), 78A (CSA), 76A (Ex e II), and 65A (Ex e II with jumper). This 1-deck terminal has a lever and button, side and center marking slots, and is suitable for Ex e II / Ex I applications, equipped with a test port. The terminal is designed for a net height of 8 kV, with a rated impulse voltage (Uimp) of 12 mm, and a net width for a neutral-through pole (N). It mounts on a DIN-35 rail and features a blue and orange actuator. The dimensions are H91.5mm x W12mm x D37.1mm, accommodating wire sizes from 0.5mm2 to 25mm2 for fine stranded conductors and 0.5mm2 to 16mm2 for solid conductors, including #20AWG to #4AWG for fine stranded conductors and #20AWG to #6AWG for solid conductors. The terminal has a 16mm2 nominal cross-section for the main feed-through conductor. Made from Polyamide (PA) 66, it includes 2-wires (1 push-in + 1 push-in) for normally closed (NC) auxiliary contacts. The terminal operates at a voltage of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2116-5207

$697.00

Verified stock: 40

Wago 2116-5207 is a ground/earthing terminal block designed for secure and efficient connections. It features push-in CAGE CLAMP spring connections for easy installation and a 1-deck/level design with a lever and button, including side and center marking slots and a test port. The terminal is rated for an impulse voltage of 12 mm and has a net width for 1 grounding / protective-earth (1PE) connection. It is compatible with DIN-35 rail mounting (35 x 15 / 35 x 7.5) and showcases a green-yellow and orange actuator. The terminal block is designed to accommodate 0.5mm2 to 25mm2 fine stranded conductors, 0.5mm2 to 16mm2 solid conductors, #20AWG to #4AWG fine stranded conductors, and #20AWG to #6AWG solid conductors, with a 16mm2 nominal cross-section of the main feed-through conductor. The dimensions are H91.5mm x W12mm x D37.1mm, made from Polyamide (PA) 66, and it supports 2-wires (1 push-in + 1 push-in) (1+1) for normally closed (NC) auxiliary contacts. This terminal block is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2116-1301

$464.00

Verified stock: 40

Wago 2116-1301 is a feed-through terminal block designed for efficient wire connection and distribution. It features push-in CAGE CLAMP spring connections for secure and maintenance-free wire termination. This terminal block is rated for currents up to 76A (IEC), 90A (IEC), 85A (UL), 78A (CSA), 76A (Ex e II), and 65A (Ex e II with jumper). It is designed with a single deck and includes a lever, side and center marking slots, and a test port, making it suitable for Ex e II applications. The terminal block has a net height of 8 kV for rated impulse voltage (Uimp) and measures 12 mm in width, supporting a control voltage for DIN-35 rail mounting. It comes in gray with an orange actuator, and its dimensions are H113.5mm x W12mm x D36.9mm. This terminal block accommodates wire sizes from 0.5mm2 to 25mm2 for fine stranded conductors and 0.5mm2 to 16mm2 for solid conductors, including #20AWG to #4AWG for fine stranded conductors and #20AWG to #6AWG for solid conductors, with a 16mm2 nominal cross-section for the main feed-through conductor. The material used is Polyamide (PA) 66, and it features 3-wire connections (1 push-in + 2 push-in) for normally closed (NC) auxiliary contacts. The terminal block is rated for voltages up to 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2116-1204

$298.00

Verified stock: 40

Wago 2116-1204 is a neutral-through terminal block designed for efficient connectivity with push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 76A (IEC), 90A (IEC), 85A (UL), 78A (CSA), 76A (Ex e II), and 65A (Ex e II with jumper). This terminal block is a 1-deck/level design featuring a lever, side and center marking slot, and a test port, making it suitable for Ex e II / Ex I applications. It has a net height of 8 kV for the rated impulse voltage (Uimp) and a net width accommodating a neutral-through pole (N). Designed for mounting on DIN-35 rail (35 x 15 / 35 x 7.5), it comes in blue with an orange actuator. The dimensions are H91.5mm x W12mm x D36.9mm, supporting a wide range of conductor sizes from 0.5mm2 to 25mm2 for fine stranded conductors and 0.5mm2 to 16mm2 for solid conductors, including #20AWG to #4AWG for fine stranded conductors and #20AWG to #6AWG for solid conductors. The terminal block has a 16mm2 nominal cross-section for the main feed-through conductor. Made from Polyamide (PA) 66, it features 2-wires (1 push-in + 1 push-in) for normally closed (NC) auxiliary contacts. The terminal operates at a voltage rating of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGO

2116-5307 WAGO Automation components

Part#:2116-5307

Manufacturer:WAGO

Product condition

We're always improving how we show product data for you! 🙌

Relevant products

2116-5204

2116-5207

2116-1301

2116-1204

2116-1201

2116-1304

2116-1292

2116-1291

2116-5204

2116-5207

2116-1301

2116-1204

2116-1201

2116-1304

2116-1292

2116-1291

2116-5204

2116-5207

2116-1301

2116-1204

We are a proud member of: