2075-381/997-404 WAGO Industrial Automation Components

WAGO 2075-381/997-404 is a terminal block without insulation housing, necessitating protection against accidental contact at voltages higher than low voltages for the relevant application. It adheres to IEC/EN 60664-1 standards with a nominal voltage of 500V, a rated surge voltage of 4kV, and a rated current of 9A, classified under overvoltage category III and pollution degree 2. According to UL 1977, it has a rated voltage of 600V and a rated current of 9A. This part features a single connection point, one potential, and one connection type across one level, utilizing PUSH WIRE technology for push-in actuation with solid conductors ranging from 0.34 to 0.75mm2 / 20 to 18 AWG and a strip length of 3.7mm / 0.15". The conductor connection direction to the PCB is 90 degrees with a pole number of 1. Physically, it measures 3mm in width, 3.9mm in height, and 17.5mm in depth, with a reel diameter for tape-and-reel packaging of 330mm and a tape width of 24mm. It features SMD PCB contact, in-line solder pin arrangement, and two solder pins per potential. The part is silver-colored, with a flammability class of UL94 V0, and is made from a copper alloy clamping spring, electrolytic copper contact material with tin plating, weighing 0.2g. It operates within a temperature range of -60 to +105°C. Commercially, it is classified under eClass 10.0 and 9.0 as 27-14-11-06, and ETIM 8.0 and 7.0 as EC001284, with a packaging unit of 18000 pieces per box, originating from CH, bearing GTIN 4055143607636, and a customs tariff number of 85369010000. It complies with RoHS without exemptions.