2065-101/998-403 WAGO Industrial Automation Components

WAGO 2065-101/998-403 is a terminal block without insulation housing, necessitating protection against accidental contact at voltages higher than low voltages for the relevant application. It adheres to the insulation coordination standard EN/IEC 60664-1 and applicable end product standards, with a nominal voltage (III/3) of 250V, rated voltage (III/2) of 320V, rated impulse voltage (III/2) of 4kV, nominal voltage (II/2) of 630V, and rated surge voltage (II/2) of 4kV. The rated current is 9A. For UL 1977, the rated voltage is 600V with a rated current of 9A. It features a single connection point, one potential, and one connection type across one level, utilizing PUSH WIRE technology for push-in actuation with solid conductors ranging from 0.2 to 0.75mm2 / 24 to 18 AWG. The strip length for connection is 7.5 to 9.5mm / 0.3 to 0.37 inches, with a conductor connection direction to PCB of 0° and a pole number of 1. Physical specifications include a pin spacing of 6mm / 0.236 inches, width of 2.3mm / 0.091 inches, height of 2.7mm / 0.106 inches, and depth of 8mm / 0.315 inches. The reel diameter for tape-and-reel packaging is 330mm with a tape width of 16mm. PCB contact is SMD with solder pin arrangement over the entire terminal strip (in-line) and one solder pin per potential. The clamping spring is made of Chrome-Nickel spring steel (CrNi), with contact material being a copper alloy and tin plating. It weighs 0.1g and operates within a temperature range of -60 to +120°C. The product is RoHS compliant, with a packaging unit of 31800 (2650) pieces per box, originating from CH, and has a GTIN of 4055143665438 with a customs tariff number of 85369010000.