Name: 2002-1304
Brand: WAGO

This item can ship within 24h!

2002-1292

$0.95

Wago 2002-1292 is an end plate designed for use with the TOPJOB S series, serving both end and intermediate plate functions. It features a rated impulse voltage (Uimp) of 0.8 mm and is constructed from Polyamide (PA) 66. The part is characterized by its dimensions, H48.5mm x W0.8mm x D33mm, and is presented in orange.

WAGO

This item can ship within 24h!

2002-1201

$1.59

Verified stock: 5,339

Wago 2002-1201 is a feed-through terminal block featuring push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 24A (IEC), 32A (IEC), 20A (UL), 20A (CSA), 22A (Ex e II), and 20A (Ex e II with jumper). This 1-deck terminal block is designed with side and center marking slots and is suitable for Ex e II applications. It has a net height of 8 kV for impulse voltage, a width of 5.2 mm, and is compatible with DIN-35 rail for mounting. The terminal block is designed for use with 0.25mm² to 4mm² fine stranded or solid conductors and #22AWG to #12AWG fine stranded or solid conductors, with a 2.5mm² nominal cross-section. Constructed from Polyamide (PA) 66, it features 2-wires (1 push-in + 1 push-in) connections and supports a voltage rating of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II). Its dimensions are H48.5mm x W5.2mm x D32.9mm, and it is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2002-1207

$5.20

Verified stock: 584

Wago 2002-1207 is a ground/earthing terminal block featuring push-in CAGE CLAMP spring connections. It is designed with a single deck/level, including side and center marking slots, and is suitable for Ex e II applications. This terminal block has a rated impulse voltage (Uimp) of 5.2 mm and a net width for 1 grounding / protective-earth (1PE). It is designed for mounting on DIN-35 rail (35 x 15 / 35 x 7.5) and exhibits a green-yellow color for easy identification. The dimensions are H50.8mm x W5.2mm x D32.9mm, accommodating 0.25mm2 to 4mm2 fine stranded or solid conductors and #22AWG to #12AWG fine stranded or solid conductors with a 2.5mm2 nominal cross-section. The terminal block is made from Polyamide (PA) 66 and includes 2-wires (1 push-in + 1 push-in) (1+1) for connections. It is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2002-1671

$5.49

Verified stock: 1,335

Wago 2002-1671 is a terminal block designed for feed-through, disconnect, and test terminal applications. It features push-in CAGE CLAMP spring connections for secure and maintenance-free wiring. This terminal block is rated for currents up to 16A according to IEC standards, 15A for UL and CSA certifications, and 17A for Ex e II applications. It is a single-deck terminal block suitable for Ex e II hazardous areas and includes a test point for easy diagnostics. The terminal block is designed to accommodate wire sizes from 0.25mm² to 4mm² or #22AWG to #12AWG, both fine stranded and solid conductors, with a nominal cross-section of 2.5mm². It is made from Polyamide (PA) 66, ensuring durability and resistance to environmental factors. The terminal block has dimensions of H66.1mm x W5.2mm x D32.9mm and is designed to mount on DIN-35 rail. It operates at a rated voltage of 400V according to IEC standards, 300V for UL and CSA, and 440V for Ex e II applications, with a rated impulse voltage of 6kV and a control voltage for AC applications. The design includes 2-wire connections (1 push-in + 1 push-in) for efficient wiring and is part of the TOPJOB S series, ensuring compatibility with a wide range of accessories and configurations for comprehensive electrical installations.

WAGO

This item can ship within 24h!

2002-1401

$2.49

Verified stock: 1,046

Wago 2002-1401 is a feed-through terminal block featuring push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 24A (IEC), 32A (IEC), 20A (UL), 20A (CSA), 22A (Ex e II), and 20A (Ex e II with jumper). This 1-deck terminal block is designed with side and center marking slots and is suitable for Ex e II applications. It has a net height of 8 kV for impulse voltage, a width for 1 feed-through pole (1P), and is compatible with DIN-35 rail mounting. The terminal block is colored gray and has dimensions of H69.9mm x W5.2mm x D32.9mm. It accommodates 0.25mm2 to 4mm2 fine stranded or solid conductors and #22AWG to #12AWG fine stranded or solid conductors with a 2.5mm2 nominal cross-section. The material is Polyamide (PA) 66, and it features 4-wires (2 push-in + 2 push-in) connections. The terminal block is rated for a voltage of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2002-1491

$1.06

Verified stock: 24

Wago 2002-1491 is an end plate designed for use as both an end and intermediate plate in electrical installations. It features a rated impulse voltage (Uimp) of 0.8 mm and is constructed from Polyamide (PA) 66, ensuring compatibility with the TOPJOB S series. The dimensions of this part are H70mm x W0.8mm x D33mm, and it is presented in gray.

WAGO

This item can ship within 24h!

2002-400

$0.97

Verified stock: 655

Wago 2002-400 is a busbar (comb) designed for insulated adjacent jumper for continuous commoning. It features a 2-way design with a net width of 2-poles (2P) and is part of the TOPJOB S series. The busbar is rated for a current of 25A and is constructed from Polyamide (PA) 66, ensuring compatibility with a variety of applications. It has a power consumption color of Light Gray and dimensions of W4.1mm x D5.7mm. The busbar is designed to handle a voltage of up to 800 V, making it suitable for a wide range of electrical installations.

WAGO

This item can ship within 24h!

2002-1301

$1.95

Verified stock: 1,438

Wago 2002-1301 is a feed-through terminal block featuring push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 24A (IEC), 32A (IEC), 20A (UL), 20A (CSA), 22A (Ex e II), and 20A (Ex e II with jumper). This 1-deck terminal block is designed with side and center marking slots, making it suitable for Ex e II applications. It has a net height of 8 kV for impulse voltage, a width accommodating 1 feed-through pole (1P), and is compatible with DIN-35 rail mounting. The terminal block is colored gray and measures H59.2mm x W5.2mm x D32.9mm. It accepts wire sizes from 0.25mm2 to 4mm2 for fine stranded or solid conductors and #22AWG to #12AWG for fine stranded or solid conductors, with a 2.5mm2 nominal cross-section. The material is Polyamide (PA) 66, and it includes 3-wire connections (1 push-in + 2 push-in) (1+2). The terminal block is rated for voltages up to 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2002-1292

$0.95

Verified stock: 1,541

Wago 2002-1292 is an end plate designed for use with the TOPJOB S series, serving both end and intermediate plate functions. It features a rated impulse voltage (Uimp) of 0.8 mm and is constructed from Polyamide (PA) 66. The part is characterized by its dimensions, H48.5mm x W0.8mm x D33mm, and is presented in orange.

WAGO

This item can ship within 24h!

2002-1201

$1.59

Verified stock: 5,339

Wago 2002-1201 is a feed-through terminal block featuring push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 24A (IEC), 32A (IEC), 20A (UL), 20A (CSA), 22A (Ex e II), and 20A (Ex e II with jumper). This 1-deck terminal block is designed with side and center marking slots and is suitable for Ex e II applications. It has a net height of 8 kV for impulse voltage, a width of 5.2 mm, and is compatible with DIN-35 rail for mounting. The terminal block is designed for use with 0.25mm² to 4mm² fine stranded or solid conductors and #22AWG to #12AWG fine stranded or solid conductors, with a 2.5mm² nominal cross-section. Constructed from Polyamide (PA) 66, it features 2-wires (1 push-in + 1 push-in) connections and supports a voltage rating of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II). Its dimensions are H48.5mm x W5.2mm x D32.9mm, and it is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2002-1207

$5.20

Verified stock: 584

Wago 2002-1207 is a ground/earthing terminal block featuring push-in CAGE CLAMP spring connections. It is designed with a single deck/level, including side and center marking slots, and is suitable for Ex e II applications. This terminal block has a rated impulse voltage (Uimp) of 5.2 mm and a net width for 1 grounding / protective-earth (1PE). It is designed for mounting on DIN-35 rail (35 x 15 / 35 x 7.5) and exhibits a green-yellow color for easy identification. The dimensions are H50.8mm x W5.2mm x D32.9mm, accommodating 0.25mm2 to 4mm2 fine stranded or solid conductors and #22AWG to #12AWG fine stranded or solid conductors with a 2.5mm2 nominal cross-section. The terminal block is made from Polyamide (PA) 66 and includes 2-wires (1 push-in + 1 push-in) (1+1) for connections. It is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2002-1671

$5.49

Verified stock: 1,335

Wago 2002-1671 is a terminal block designed for feed-through, disconnect, and test terminal applications. It features push-in CAGE CLAMP spring connections for secure and maintenance-free wiring. This terminal block is rated for currents up to 16A according to IEC standards, 15A for UL and CSA certifications, and 17A for Ex e II applications. It is a single-deck terminal block suitable for Ex e II hazardous areas and includes a test point for easy diagnostics. The terminal block is designed to accommodate wire sizes from 0.25mm² to 4mm² or #22AWG to #12AWG, both fine stranded and solid conductors, with a nominal cross-section of 2.5mm². It is made from Polyamide (PA) 66, ensuring durability and resistance to environmental factors. The terminal block has dimensions of H66.1mm x W5.2mm x D32.9mm and is designed to mount on DIN-35 rail. It operates at a rated voltage of 400V according to IEC standards, 300V for UL and CSA, and 440V for Ex e II applications, with a rated impulse voltage of 6kV and a control voltage for AC applications. The design includes 2-wire connections (1 push-in + 1 push-in) for efficient wiring and is part of the TOPJOB S series, ensuring compatibility with a wide range of accessories and configurations for comprehensive electrical installations.

WAGO

This item can ship within 24h!

2002-1401

$2.49

Verified stock: 1,046

Wago 2002-1401 is a feed-through terminal block featuring push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 24A (IEC), 32A (IEC), 20A (UL), 20A (CSA), 22A (Ex e II), and 20A (Ex e II with jumper). This 1-deck terminal block is designed with side and center marking slots and is suitable for Ex e II applications. It has a net height of 8 kV for impulse voltage, a width for 1 feed-through pole (1P), and is compatible with DIN-35 rail mounting. The terminal block is colored gray and has dimensions of H69.9mm x W5.2mm x D32.9mm. It accommodates 0.25mm2 to 4mm2 fine stranded or solid conductors and #22AWG to #12AWG fine stranded or solid conductors with a 2.5mm2 nominal cross-section. The material is Polyamide (PA) 66, and it features 4-wires (2 push-in + 2 push-in) connections. The terminal block is rated for a voltage of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2002-1491

$1.06

Verified stock: 24

Wago 2002-1491 is an end plate designed for use as both an end and intermediate plate in electrical installations. It features a rated impulse voltage (Uimp) of 0.8 mm and is constructed from Polyamide (PA) 66, ensuring compatibility with the TOPJOB S series. The dimensions of this part are H70mm x W0.8mm x D33mm, and it is presented in gray.

WAGO

This item can ship within 24h!

2002-400

$0.97

Verified stock: 655

Wago 2002-400 is a busbar (comb) designed for insulated adjacent jumper for continuous commoning. It features a 2-way design with a net width of 2-poles (2P) and is part of the TOPJOB S series. The busbar is rated for a current of 25A and is constructed from Polyamide (PA) 66, ensuring compatibility with a variety of applications. It has a power consumption color of Light Gray and dimensions of W4.1mm x D5.7mm. The busbar is designed to handle a voltage of up to 800 V, making it suitable for a wide range of electrical installations.

WAGO

This item can ship within 24h!

2002-1301

$1.95

Verified stock: 1,438

Wago 2002-1301 is a feed-through terminal block featuring push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 24A (IEC), 32A (IEC), 20A (UL), 20A (CSA), 22A (Ex e II), and 20A (Ex e II with jumper). This 1-deck terminal block is designed with side and center marking slots, making it suitable for Ex e II applications. It has a net height of 8 kV for impulse voltage, a width accommodating 1 feed-through pole (1P), and is compatible with DIN-35 rail mounting. The terminal block is colored gray and measures H59.2mm x W5.2mm x D32.9mm. It accepts wire sizes from 0.25mm2 to 4mm2 for fine stranded or solid conductors and #22AWG to #12AWG for fine stranded or solid conductors, with a 2.5mm2 nominal cross-section. The material is Polyamide (PA) 66, and it includes 3-wire connections (1 push-in + 2 push-in) (1+2). The terminal block is rated for voltages up to 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2002-1292

$0.95

Verified stock: 1,541

Wago 2002-1292 is an end plate designed for use with the TOPJOB S series, serving both end and intermediate plate functions. It features a rated impulse voltage (Uimp) of 0.8 mm and is constructed from Polyamide (PA) 66. The part is characterized by its dimensions, H48.5mm x W0.8mm x D33mm, and is presented in orange.

WAGO

This item can ship within 24h!

2002-1201

$1.59

Verified stock: 5,339

Wago 2002-1201 is a feed-through terminal block featuring push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 24A (IEC), 32A (IEC), 20A (UL), 20A (CSA), 22A (Ex e II), and 20A (Ex e II with jumper). This 1-deck terminal block is designed with side and center marking slots and is suitable for Ex e II applications. It has a net height of 8 kV for impulse voltage, a width of 5.2 mm, and is compatible with DIN-35 rail for mounting. The terminal block is designed for use with 0.25mm² to 4mm² fine stranded or solid conductors and #22AWG to #12AWG fine stranded or solid conductors, with a 2.5mm² nominal cross-section. Constructed from Polyamide (PA) 66, it features 2-wires (1 push-in + 1 push-in) connections and supports a voltage rating of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II). Its dimensions are H48.5mm x W5.2mm x D32.9mm, and it is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2002-1207

$5.20

Verified stock: 584

Wago 2002-1207 is a ground/earthing terminal block featuring push-in CAGE CLAMP spring connections. It is designed with a single deck/level, including side and center marking slots, and is suitable for Ex e II applications. This terminal block has a rated impulse voltage (Uimp) of 5.2 mm and a net width for 1 grounding / protective-earth (1PE). It is designed for mounting on DIN-35 rail (35 x 15 / 35 x 7.5) and exhibits a green-yellow color for easy identification. The dimensions are H50.8mm x W5.2mm x D32.9mm, accommodating 0.25mm2 to 4mm2 fine stranded or solid conductors and #22AWG to #12AWG fine stranded or solid conductors with a 2.5mm2 nominal cross-section. The terminal block is made from Polyamide (PA) 66 and includes 2-wires (1 push-in + 1 push-in) (1+1) for connections. It is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2002-1671

$5.49

Verified stock: 1,335

Wago 2002-1671 is a terminal block designed for feed-through, disconnect, and test terminal applications. It features push-in CAGE CLAMP spring connections for secure and maintenance-free wiring. This terminal block is rated for currents up to 16A according to IEC standards, 15A for UL and CSA certifications, and 17A for Ex e II applications. It is a single-deck terminal block suitable for Ex e II hazardous areas and includes a test point for easy diagnostics. The terminal block is designed to accommodate wire sizes from 0.25mm² to 4mm² or #22AWG to #12AWG, both fine stranded and solid conductors, with a nominal cross-section of 2.5mm². It is made from Polyamide (PA) 66, ensuring durability and resistance to environmental factors. The terminal block has dimensions of H66.1mm x W5.2mm x D32.9mm and is designed to mount on DIN-35 rail. It operates at a rated voltage of 400V according to IEC standards, 300V for UL and CSA, and 440V for Ex e II applications, with a rated impulse voltage of 6kV and a control voltage for AC applications. The design includes 2-wire connections (1 push-in + 1 push-in) for efficient wiring and is part of the TOPJOB S series, ensuring compatibility with a wide range of accessories and configurations for comprehensive electrical installations.

WAGO

2002-1304 WAGO Automation components

Part#:2002-1304

Manufacturer:WAGO

Product condition

We're always improving how we show product data for you! 🙌

Relevant products

2002-1292

2002-1201

2002-1207

2002-1671

2002-1401

2002-1491

2002-400

2002-1301

2002-1292

2002-1201

2002-1207

2002-1671

2002-1401

2002-1491

2002-400

2002-1301

2002-1292

2002-1201

2002-1207

2002-1671

We are a proud member of: