NI2-Q6.5-AN6-0.16-FS4.4X3/S304

Inductive Sensor, Monitoring Kit for Power Clamps, Rated switching distance 2 mm, Cable length (L) 0.16 m, Non-flush, Q6,5 power block with two connected sensors and LEDs, Relocatable block 0°…90°, with cross drilling for flexible cable routing, Plastic, PBT‐GF20‐V0, Resistant to magnetic fields (weld-resistant), for DC and AC fields up to 100 mT, 2 x NO contact, NPN output, DC 4-wire, 10…30 VDC

Turck

NI2-Q6.5-ADZ32-0.16-FSB5.4X4/S304

Verified stock: 0

Inductive Sensor, Monitoring Kit for Power Clamps, Rated switching distance 2 mm, Cable length (L) 0.16 m, Non-flush, Rectangular, height 23.5 mm, Plastic, PBT‐GF20‐V0, Resistant to magnetic fields (weld-resistant), for DC and AC fields up to 100 mT, AC 4-wire, 20…250 VDC, DC 4-wire, 10…300 VDC, 2 x NO contact, 1/2 male connector, "

Turck

BI1.5-EH6.5-AN6X-0.2-RS4T

Verified stock: 0

Turck BI1.5-EH6.5-AN6X-0.2-RS4T is an inductive proximity sensor within the BI...-EH6.5 series, designed for embeddable applications. It operates with a supply voltage range of 10-30Vdc, including nominal 12Vdc and 24Vdc. The sensor features a stainless steel housing, a sensing face made of glass fiber reinforced Polyamide (PA12-GF20), a Polypropylene (PP) end cap, and a Polyurethane (PUR) cable jacket. It comes pre-wired with a 20cm / 8" pigtail PUR cable that terminates with a 4-pin M12 Eurofast QD male connector. The sensor's shape is a 6.5mm diameter smooth cylindrical/barrel (Picoprox), and it offers a degree of protection rated at IP67. It has a maximum switching frequency of 3kHz / 3000Hz, can operate in ambient air temperatures ranging from -25°C to +70°C, and features one digital output (10-30Vdc; NPN; 150mA max.). The current consumption is 15mA under no-load conditions, and it has a sensing distance of 1.5mm. Protection functions include short-circuit (pulsed), overload, and reverse polarity, with an operating mode of NO (Normally Open).

Turck

BI1.5-EGT08-AP6/S100/S1589

Verified stock: 0

Turck BI1.5-EGT08-AP6/S100/S1589 is an inductive proximity sensor belonging to the BI...-EGT08 series, designed as a Weldguard coated embeddable special version without an LED indicator. This sensor operates with a supply voltage range of 10-30Vdc, including nominal values of 12Vdc and 24Vdc. It features a housing made from PTFE-coated 1.4427 (316L) stainless steel and a sensing face of PTFE-coated PA12-GF20 (glass fiber reinforced Polyamide), with a PP (Polypropylene) end cap. The connection is facilitated through a pre-wired 2m / 6.5ft cable terminated with bare end flying leads. Its shape is an M8 fully threaded barrel, offering a degree of protection rated at IP67. The sensor supports a maximum switching frequency of 3kHz / 3000Hz and can operate within an ambient air temperature range of -25°C to +100°C. It includes 1 x digital output (10-30Vdc; PNP; 150mA max.) and has a no-load current consumption of 15mA. The sensing distance is specified at 1.5mm. Protection functions include short-circuit (pulsed), overload, and reverse polarity. The thread size is M8, and it operates in a Normally Open (NO) mode.

Turck

This item can ship within 24h!

BI2-Q5.5-RN6X-0.91-PSG3/S771/CS10011

$108.63

Verified stock: 44

Turck BI2-Q5.5-RN6X-0.91-PSG3/S771/CS10011 is an inductive proximity sensor belonging to the BI...-Q5.5 series, featuring a black moulded plug body that is embeddable. It operates on a supply voltage of 10-30Vdc, with nominal values of 12Vdc and 24Vdc, and has a PP-GF20 (glass fiber reinforced Polypropylene) sensing face. This sensor is designed with a pre-wired 91cm / 36" pigtail cable, terminating in a 3-pin M8 Picofast snap-lock male connector. It has a 5.5mm thick rectangular body and offers a degree of protection rated at IP67. The ambient air temperature range for operation is between -25°C and +100°C. It features 1 x digital output (10-30Vdc; NPN) with a sensing distance of 2mm. The sensor includes protection functions against short-circuit (pulsed), overload, and reverse polarity, and operates in a Normally Closed (NC) mode.

Turck

This item can ship within 24h!

NI2-Q6.5-AP6-0.1-FS4.4X3/S304

$182.30

Verified stock: 1

Inductive Sensor, Monitoring Kit for Power Clamps, Rated switching distance 2 mm, Cable length (L) 0.1 m, Non-flush, Q6,5 power block with two connected sensors and LEDs, Relocatable block 0°…90°, with cross drilling for flexible cable routing, Plastic, PBT‐GF20‐V0, Resistant to magnetic fields (weld-resistant), for DC and AC fields up to 100 mT, 2 x NO contact, PNP output, DC 4-wire, 10…30 VDC

Turck

NI2-Q6.5-AP6-0.13-FS4.4X3/S304

Verified stock: 0

Inductive Sensor, Monitoring Kit for Power Clamps, Rated switching distance 2 mm, Cable length (L) 0.13 m, Non-flush, Q6,5 power block with two connected sensors and LEDs, Relocatable block 0°…90°, with cross drilling for flexible cable routing, Plastic, PBT‐GF20‐V0, Resistant to magnetic fields (weld-resistant), for DC and AC fields up to 100 mT, 2 x NO contact, PNP output, DC 4-wire, 10…30 VDC

Turck

NI2-ISI-0.055-BDS-2AP6X3-H1141/S34wISI2

Verified stock: 0

Inductive Sensor, Monitoring Kit for Power Clamps, Rated switching distance 2 mm, Cable length (L) 0.055 m, Non-flush, BDS power block with two connected sensors and LEDs, Robust rotatable connector 0°, 45° and 90°, for optimal cable routing, Plastic, PBT‐GF20‐V0, Resistant to magnetic fields (weld-resistant), for DC and AC fields up to 100 mT, 2 x NO contact, PNP output, DC 4-wire, 10…30 VDC

Turck

NI2-Q6.5-AN6-0.16-FS4.4X3/S304

Verified stock: 0

Inductive Sensor, Monitoring Kit for Power Clamps, Rated switching distance 2 mm, Cable length (L) 0.16 m, Non-flush, Q6,5 power block with two connected sensors and LEDs, Relocatable block 0°…90°, with cross drilling for flexible cable routing, Plastic, PBT‐GF20‐V0, Resistant to magnetic fields (weld-resistant), for DC and AC fields up to 100 mT, 2 x NO contact, NPN output, DC 4-wire, 10…30 VDC

Turck

NI2-Q6.5-ADZ32-0.16-FSB5.4X4/S304

Verified stock: 0

Inductive Sensor, Monitoring Kit for Power Clamps, Rated switching distance 2 mm, Cable length (L) 0.16 m, Non-flush, Rectangular, height 23.5 mm, Plastic, PBT‐GF20‐V0, Resistant to magnetic fields (weld-resistant), for DC and AC fields up to 100 mT, AC 4-wire, 20…250 VDC, DC 4-wire, 10…300 VDC, 2 x NO contact, 1/2 male connector, "

Turck

BI1.5-EH6.5-AN6X-0.2-RS4T

Verified stock: 0

Turck BI1.5-EH6.5-AN6X-0.2-RS4T is an inductive proximity sensor within the BI...-EH6.5 series, designed for embeddable applications. It operates with a supply voltage range of 10-30Vdc, including nominal 12Vdc and 24Vdc. The sensor features a stainless steel housing, a sensing face made of glass fiber reinforced Polyamide (PA12-GF20), a Polypropylene (PP) end cap, and a Polyurethane (PUR) cable jacket. It comes pre-wired with a 20cm / 8" pigtail PUR cable that terminates with a 4-pin M12 Eurofast QD male connector. The sensor's shape is a 6.5mm diameter smooth cylindrical/barrel (Picoprox), and it offers a degree of protection rated at IP67. It has a maximum switching frequency of 3kHz / 3000Hz, can operate in ambient air temperatures ranging from -25°C to +70°C, and features one digital output (10-30Vdc; NPN; 150mA max.). The current consumption is 15mA under no-load conditions, and it has a sensing distance of 1.5mm. Protection functions include short-circuit (pulsed), overload, and reverse polarity, with an operating mode of NO (Normally Open).

Turck

BI1.5-EGT08-AP6/S100/S1589

Verified stock: 0

Turck BI1.5-EGT08-AP6/S100/S1589 is an inductive proximity sensor belonging to the BI...-EGT08 series, designed as a Weldguard coated embeddable special version without an LED indicator. This sensor operates with a supply voltage range of 10-30Vdc, including nominal values of 12Vdc and 24Vdc. It features a housing made from PTFE-coated 1.4427 (316L) stainless steel and a sensing face of PTFE-coated PA12-GF20 (glass fiber reinforced Polyamide), with a PP (Polypropylene) end cap. The connection is facilitated through a pre-wired 2m / 6.5ft cable terminated with bare end flying leads. Its shape is an M8 fully threaded barrel, offering a degree of protection rated at IP67. The sensor supports a maximum switching frequency of 3kHz / 3000Hz and can operate within an ambient air temperature range of -25°C to +100°C. It includes 1 x digital output (10-30Vdc; PNP; 150mA max.) and has a no-load current consumption of 15mA. The sensing distance is specified at 1.5mm. Protection functions include short-circuit (pulsed), overload, and reverse polarity. The thread size is M8, and it operates in a Normally Open (NO) mode.

Turck

This item can ship within 24h!

BI2-Q5.5-RN6X-0.91-PSG3/S771/CS10011

$108.63

Verified stock: 44

Turck BI2-Q5.5-RN6X-0.91-PSG3/S771/CS10011 is an inductive proximity sensor belonging to the BI...-Q5.5 series, featuring a black moulded plug body that is embeddable. It operates on a supply voltage of 10-30Vdc, with nominal values of 12Vdc and 24Vdc, and has a PP-GF20 (glass fiber reinforced Polypropylene) sensing face. This sensor is designed with a pre-wired 91cm / 36" pigtail cable, terminating in a 3-pin M8 Picofast snap-lock male connector. It has a 5.5mm thick rectangular body and offers a degree of protection rated at IP67. The ambient air temperature range for operation is between -25°C and +100°C. It features 1 x digital output (10-30Vdc; NPN) with a sensing distance of 2mm. The sensor includes protection functions against short-circuit (pulsed), overload, and reverse polarity, and operates in a Normally Closed (NC) mode.

Turck

This item can ship within 24h!

NI2-Q6.5-AP6-0.1-FS4.4X3/S304

$182.30

Verified stock: 1

Inductive Sensor, Monitoring Kit for Power Clamps, Rated switching distance 2 mm, Cable length (L) 0.1 m, Non-flush, Q6,5 power block with two connected sensors and LEDs, Relocatable block 0°…90°, with cross drilling for flexible cable routing, Plastic, PBT‐GF20‐V0, Resistant to magnetic fields (weld-resistant), for DC and AC fields up to 100 mT, 2 x NO contact, PNP output, DC 4-wire, 10…30 VDC

Turck

NI2-Q6.5-AP6-0.13-FS4.4X3/S304

Verified stock: 0

Inductive Sensor, Monitoring Kit for Power Clamps, Rated switching distance 2 mm, Cable length (L) 0.13 m, Non-flush, Q6,5 power block with two connected sensors and LEDs, Relocatable block 0°…90°, with cross drilling for flexible cable routing, Plastic, PBT‐GF20‐V0, Resistant to magnetic fields (weld-resistant), for DC and AC fields up to 100 mT, 2 x NO contact, PNP output, DC 4-wire, 10…30 VDC

Turck

NI2-ISI-0.055-BDS-2AP6X3-H1141/S34wISI2

Verified stock: 0

Inductive Sensor, Monitoring Kit for Power Clamps, Rated switching distance 2 mm, Cable length (L) 0.055 m, Non-flush, BDS power block with two connected sensors and LEDs, Robust rotatable connector 0°, 45° and 90°, for optimal cable routing, Plastic, PBT‐GF20‐V0, Resistant to magnetic fields (weld-resistant), for DC and AC fields up to 100 mT, 2 x NO contact, PNP output, DC 4-wire, 10…30 VDC

Turck

NI2-Q6.5-AN6-0.16-FS4.4X3/S304

Verified stock: 0

Inductive Sensor, Monitoring Kit for Power Clamps, Rated switching distance 2 mm, Cable length (L) 0.16 m, Non-flush, Q6,5 power block with two connected sensors and LEDs, Relocatable block 0°…90°, with cross drilling for flexible cable routing, Plastic, PBT‐GF20‐V0, Resistant to magnetic fields (weld-resistant), for DC and AC fields up to 100 mT, 2 x NO contact, NPN output, DC 4-wire, 10…30 VDC

Turck

NI2-Q6.5-ADZ32-0.16-FSB5.4X4/S304

Verified stock: 0

Inductive Sensor, Monitoring Kit for Power Clamps, Rated switching distance 2 mm, Cable length (L) 0.16 m, Non-flush, Rectangular, height 23.5 mm, Plastic, PBT‐GF20‐V0, Resistant to magnetic fields (weld-resistant), for DC and AC fields up to 100 mT, AC 4-wire, 20…250 VDC, DC 4-wire, 10…300 VDC, 2 x NO contact, 1/2 male connector, "

Turck

BI1.5-EH6.5-AN6X-0.2-RS4T

Verified stock: 0

Turck BI1.5-EH6.5-AN6X-0.2-RS4T is an inductive proximity sensor within the BI...-EH6.5 series, designed for embeddable applications. It operates with a supply voltage range of 10-30Vdc, including nominal 12Vdc and 24Vdc. The sensor features a stainless steel housing, a sensing face made of glass fiber reinforced Polyamide (PA12-GF20), a Polypropylene (PP) end cap, and a Polyurethane (PUR) cable jacket. It comes pre-wired with a 20cm / 8" pigtail PUR cable that terminates with a 4-pin M12 Eurofast QD male connector. The sensor's shape is a 6.5mm diameter smooth cylindrical/barrel (Picoprox), and it offers a degree of protection rated at IP67. It has a maximum switching frequency of 3kHz / 3000Hz, can operate in ambient air temperatures ranging from -25°C to +70°C, and features one digital output (10-30Vdc; NPN; 150mA max.). The current consumption is 15mA under no-load conditions, and it has a sensing distance of 1.5mm. Protection functions include short-circuit (pulsed), overload, and reverse polarity, with an operating mode of NO (Normally Open).

Turck

BI1.5-EGT08-AP6/S100/S1589

Verified stock: 0

Turck BI1.5-EGT08-AP6/S100/S1589 is an inductive proximity sensor belonging to the BI...-EGT08 series, designed as a Weldguard coated embeddable special version without an LED indicator. This sensor operates with a supply voltage range of 10-30Vdc, including nominal values of 12Vdc and 24Vdc. It features a housing made from PTFE-coated 1.4427 (316L) stainless steel and a sensing face of PTFE-coated PA12-GF20 (glass fiber reinforced Polyamide), with a PP (Polypropylene) end cap. The connection is facilitated through a pre-wired 2m / 6.5ft cable terminated with bare end flying leads. Its shape is an M8 fully threaded barrel, offering a degree of protection rated at IP67. The sensor supports a maximum switching frequency of 3kHz / 3000Hz and can operate within an ambient air temperature range of -25°C to +100°C. It includes 1 x digital output (10-30Vdc; PNP; 150mA max.) and has a no-load current consumption of 15mA. The sensing distance is specified at 1.5mm. Protection functions include short-circuit (pulsed), overload, and reverse polarity. The thread size is M8, and it operates in a Normally Open (NO) mode.

Turck

DF20-N Turck I/O Modules

Part#:DF20-N

Manufacturer:Turck

Alt. Part#:6884212

Product Details

Product condition

DF20-N Description

Related documents DF20-N Specs

Turck Disclaimer:

Relevant products

NI2-Q6.5-AN6-0.16-FS4.4X3/S304

NI2-Q6.5-ADZ32-0.16-FSB5.4X4/S304

BI1.5-EH6.5-AN6X-0.2-RS4T

BI1.5-EGT08-AP6/S100/S1589

BI2-Q5.5-RN6X-0.91-PSG3/S771/CS10011

NI2-Q6.5-AP6-0.1-FS4.4X3/S304

NI2-Q6.5-AP6-0.13-FS4.4X3/S304

NI2-ISI-0.055-BDS-2AP6X3-H1141/S34wISI2

NI2-Q6.5-AN6-0.16-FS4.4X3/S304

NI2-Q6.5-ADZ32-0.16-FSB5.4X4/S304

BI1.5-EH6.5-AN6X-0.2-RS4T

BI1.5-EGT08-AP6/S100/S1589

BI2-Q5.5-RN6X-0.91-PSG3/S771/CS10011

NI2-Q6.5-AP6-0.1-FS4.4X3/S304

NI2-Q6.5-AP6-0.13-FS4.4X3/S304

NI2-ISI-0.055-BDS-2AP6X3-H1141/S34wISI2

NI2-Q6.5-AN6-0.16-FS4.4X3/S304

NI2-Q6.5-ADZ32-0.16-FSB5.4X4/S304

BI1.5-EH6.5-AN6X-0.2-RS4T

BI1.5-EGT08-AP6/S100/S1589

We are a proud member of: