Name: BCE10-QF5.5-AN6X2
Brand: Turck

BCE10-S30-VP6X

Capacitive Sensor, With Potentiometer, Rated switching distance 15 mm, Cable length (L) 2 m, Flush, M30 × 1.5 threaded barrel, Plastic, PA12‐GF30, Fine adjustment via potentiometer, DC 4-wire, 10…30 VDC, Complementary contact, PNP output, Cable connection

Turck

BCE10-QF5.5-AP6X2-0.3-RS4

Verified stock: 0

Turck BCE10-QF5.5-AP6X2-0.3-RS4 is a capacitive proximity sensor belonging to the BC...-QF5.5 series, designed with a Qpak housing for top-sensing and embeddable applications. It operates on a supply voltage range of 10-30Vdc, with nominal values at 12Vdc and 24Vdc. The sensor is constructed with a PP (Polypropylene) housing and sensing face, and features a PUR (Polyurethane) cable jacket. It comes pre-wired with a 30cm / 12" pigtail PUR cable, terminating in a 4-pin M12 Eurofast QD male connector. This sensor has a 5.5mm thick rectangular body and offers an IP65 degree of protection. It supports a maximum switching frequency of 50Hz and can operate within an ambient air temperature range of -10°C to +60°C. The sensor provides 1 x digital output (10-30Vdc; PNP; 100mA max.), with a no-load current consumption of 15mA. It has a sensing distance of 10mm and includes protection functions against short-circuit (pulsed), overload, and reverse polarity. Its operating mode is NO (Normally Open).

Turck

BCE10-QF5.5-AN6X2/S250

Verified stock: 0

Turck BCE10-QF5.5-AN6X2/S250 is a capacitive proximity sensor belonging to the BC...-QF5.5 series. This sensor features a Qpak housing with top-sensing capabilities and is designed to be embeddable. It operates on a supply voltage range of 10-30Vdc, with nominal values at 12Vdc and 24Vdc. The sensor is constructed with a PP (Polypropylene) housing and a PP (Polypropylene) sensing face, ensuring compatibility with various applications. It comes pre-wired with a 2m / 6.5ft cable that terminates with bare end flying leads, facilitating easy installation. The sensor's body is a 5.5mm thick rectangle, and it offers a sensing distance of 10mm. It is equipped with a single digital output (10-30Vdc; NPN) and operates in a Normally Open (NO) mode. For protection, it includes functions against short-circuit (pulsed), overload, and reverse polarity. The sensor is rated with a degree of protection of IP65, indicating a solid level of protection against dust ingress and water jets.

Turck

BCE10-QF5.5-AN6X2-0.3-RS4

Verified stock: 0

Turck BCE10-QF5.5-AN6X2-0.3-RS4 is a capacitive proximity sensor/switch that falls under the BC...-QF5.5 series. This part features a Qpak housing with top-sensing capabilities and is designed to be embeddable. It operates on a supply voltage of 10-30Vdc, with nominal values of 12Vdc and 24Vdc. The sensor is constructed with a PP (Polypropylene) housing and sensing face, and a PUR (Polyurethane) cable jacket. It comes pre-wired with a 30cm / 12" pigtail PUR cable that terminates with a 4-pin M12 Eurofast QD male connector. The sensor has a 5.5mm thick rectangular body and offers an IP65 degree of protection. It can operate at a maximum switching frequency of 50Hz and is suitable for ambient air temperatures ranging from -10°C to +60°C. The sensor includes 1 x digital output (10-30Vdc; NPN; 100mA max.) and has a no-load current consumption of 15mA. Its sensing distance is 10mm, and it features protection functions against short-circuit (pulsed), overload, and reverse polarity. The operating mode of the sensor is NO (Normally Open).

Turck

BCE10-P30SR-VP6X2

Verified stock: 0

Capacitive Sensor, With Potentiometer, Rated switching distance 15 mm, Flush, M30 × 1.5 threaded barrel, Plastic, ABS, Fine adjustment via potentiometer, DC 4-wire, 10…30 VDC, Complementary contact, PNP output, Terminal chamber

Turck

BCE10-QF5.5-AP6X2

Verified stock: 0

Capacitive Sensor, Rated switching distance 10 mm, Cable length (L) 2 m, Flush, Rectangular, height 5.5 mm, Large active face, marked for correct installation, Plastic, PP, Fine adjustment via potentiometer, DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

Turck

BCE10-P30SR-VN6X2

Verified stock: 0

Capacitive Sensor, With Potentiometer, Rated switching distance 15 mm, Flush, M30 × 1.5 threaded barrel, Plastic, ABS, Fine adjustment via potentiometer, DC 4-wire, 10…30 VDC, Changeover contact, PNP output, Terminal chamber

Turck

BCE10-S30-VN6X-H1141

Verified stock: 0

Capacitive Sensor, With Potentiometer, Rated switching distance 15 mm, Flush, M30 × 1.5 threaded barrel, Plastic, PA12‐GF30, Fine adjustment via potentiometer, DC 4-wire, 10…30 VDC, Complementary contact, NPN output, M12 × 1 connector

Turck

BCE10-S30-VP6X

Verified stock: 0

Capacitive Sensor, With Potentiometer, Rated switching distance 15 mm, Cable length (L) 2 m, Flush, M30 × 1.5 threaded barrel, Plastic, PA12‐GF30, Fine adjustment via potentiometer, DC 4-wire, 10…30 VDC, Complementary contact, PNP output, Cable connection

Turck

BCE10-QF5.5-AP6X2-0.3-RS4

Verified stock: 0

Turck BCE10-QF5.5-AP6X2-0.3-RS4 is a capacitive proximity sensor belonging to the BC...-QF5.5 series, designed with a Qpak housing for top-sensing and embeddable applications. It operates on a supply voltage range of 10-30Vdc, with nominal values at 12Vdc and 24Vdc. The sensor is constructed with a PP (Polypropylene) housing and sensing face, and features a PUR (Polyurethane) cable jacket. It comes pre-wired with a 30cm / 12" pigtail PUR cable, terminating in a 4-pin M12 Eurofast QD male connector. This sensor has a 5.5mm thick rectangular body and offers an IP65 degree of protection. It supports a maximum switching frequency of 50Hz and can operate within an ambient air temperature range of -10°C to +60°C. The sensor provides 1 x digital output (10-30Vdc; PNP; 100mA max.), with a no-load current consumption of 15mA. It has a sensing distance of 10mm and includes protection functions against short-circuit (pulsed), overload, and reverse polarity. Its operating mode is NO (Normally Open).

Turck

BCE10-QF5.5-AN6X2/S250

Verified stock: 0

Turck BCE10-QF5.5-AN6X2/S250 is a capacitive proximity sensor belonging to the BC...-QF5.5 series. This sensor features a Qpak housing with top-sensing capabilities and is designed to be embeddable. It operates on a supply voltage range of 10-30Vdc, with nominal values at 12Vdc and 24Vdc. The sensor is constructed with a PP (Polypropylene) housing and a PP (Polypropylene) sensing face, ensuring compatibility with various applications. It comes pre-wired with a 2m / 6.5ft cable that terminates with bare end flying leads, facilitating easy installation. The sensor's body is a 5.5mm thick rectangle, and it offers a sensing distance of 10mm. It is equipped with a single digital output (10-30Vdc; NPN) and operates in a Normally Open (NO) mode. For protection, it includes functions against short-circuit (pulsed), overload, and reverse polarity. The sensor is rated with a degree of protection of IP65, indicating a solid level of protection against dust ingress and water jets.

Turck

BCE10-QF5.5-AN6X2-0.3-RS4

Verified stock: 0

Turck BCE10-QF5.5-AN6X2-0.3-RS4 is a capacitive proximity sensor/switch that falls under the BC...-QF5.5 series. This part features a Qpak housing with top-sensing capabilities and is designed to be embeddable. It operates on a supply voltage of 10-30Vdc, with nominal values of 12Vdc and 24Vdc. The sensor is constructed with a PP (Polypropylene) housing and sensing face, and a PUR (Polyurethane) cable jacket. It comes pre-wired with a 30cm / 12" pigtail PUR cable that terminates with a 4-pin M12 Eurofast QD male connector. The sensor has a 5.5mm thick rectangular body and offers an IP65 degree of protection. It can operate at a maximum switching frequency of 50Hz and is suitable for ambient air temperatures ranging from -10°C to +60°C. The sensor includes 1 x digital output (10-30Vdc; NPN; 100mA max.) and has a no-load current consumption of 15mA. Its sensing distance is 10mm, and it features protection functions against short-circuit (pulsed), overload, and reverse polarity. The operating mode of the sensor is NO (Normally Open).

Turck

BCE10-P30SR-VP6X2

Verified stock: 0

Capacitive Sensor, With Potentiometer, Rated switching distance 15 mm, Flush, M30 × 1.5 threaded barrel, Plastic, ABS, Fine adjustment via potentiometer, DC 4-wire, 10…30 VDC, Complementary contact, PNP output, Terminal chamber

Turck

BCE10-QF5.5-AP6X2

Verified stock: 0

Capacitive Sensor, Rated switching distance 10 mm, Cable length (L) 2 m, Flush, Rectangular, height 5.5 mm, Large active face, marked for correct installation, Plastic, PP, Fine adjustment via potentiometer, DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

Turck

BCE10-P30SR-VN6X2

Verified stock: 0

Capacitive Sensor, With Potentiometer, Rated switching distance 15 mm, Flush, M30 × 1.5 threaded barrel, Plastic, ABS, Fine adjustment via potentiometer, DC 4-wire, 10…30 VDC, Changeover contact, PNP output, Terminal chamber

Turck

BCE10-S30-VN6X-H1141

Verified stock: 0

Capacitive Sensor, With Potentiometer, Rated switching distance 15 mm, Flush, M30 × 1.5 threaded barrel, Plastic, PA12‐GF30, Fine adjustment via potentiometer, DC 4-wire, 10…30 VDC, Complementary contact, NPN output, M12 × 1 connector

Turck

BCE10-S30-VP6X

Verified stock: 0

Capacitive Sensor, With Potentiometer, Rated switching distance 15 mm, Cable length (L) 2 m, Flush, M30 × 1.5 threaded barrel, Plastic, PA12‐GF30, Fine adjustment via potentiometer, DC 4-wire, 10…30 VDC, Complementary contact, PNP output, Cable connection

Turck

BCE10-QF5.5-AP6X2-0.3-RS4

Verified stock: 0

Turck BCE10-QF5.5-AP6X2-0.3-RS4 is a capacitive proximity sensor belonging to the BC...-QF5.5 series, designed with a Qpak housing for top-sensing and embeddable applications. It operates on a supply voltage range of 10-30Vdc, with nominal values at 12Vdc and 24Vdc. The sensor is constructed with a PP (Polypropylene) housing and sensing face, and features a PUR (Polyurethane) cable jacket. It comes pre-wired with a 30cm / 12" pigtail PUR cable, terminating in a 4-pin M12 Eurofast QD male connector. This sensor has a 5.5mm thick rectangular body and offers an IP65 degree of protection. It supports a maximum switching frequency of 50Hz and can operate within an ambient air temperature range of -10°C to +60°C. The sensor provides 1 x digital output (10-30Vdc; PNP; 100mA max.), with a no-load current consumption of 15mA. It has a sensing distance of 10mm and includes protection functions against short-circuit (pulsed), overload, and reverse polarity. Its operating mode is NO (Normally Open).

Turck

BCE10-QF5.5-AN6X2/S250

Verified stock: 0

Turck BCE10-QF5.5-AN6X2/S250 is a capacitive proximity sensor belonging to the BC...-QF5.5 series. This sensor features a Qpak housing with top-sensing capabilities and is designed to be embeddable. It operates on a supply voltage range of 10-30Vdc, with nominal values at 12Vdc and 24Vdc. The sensor is constructed with a PP (Polypropylene) housing and a PP (Polypropylene) sensing face, ensuring compatibility with various applications. It comes pre-wired with a 2m / 6.5ft cable that terminates with bare end flying leads, facilitating easy installation. The sensor's body is a 5.5mm thick rectangle, and it offers a sensing distance of 10mm. It is equipped with a single digital output (10-30Vdc; NPN) and operates in a Normally Open (NO) mode. For protection, it includes functions against short-circuit (pulsed), overload, and reverse polarity. The sensor is rated with a degree of protection of IP65, indicating a solid level of protection against dust ingress and water jets.

Turck

BCE10-QF5.5-AN6X2-0.3-RS4

Verified stock: 0

Turck BCE10-QF5.5-AN6X2-0.3-RS4 is a capacitive proximity sensor/switch that falls under the BC...-QF5.5 series. This part features a Qpak housing with top-sensing capabilities and is designed to be embeddable. It operates on a supply voltage of 10-30Vdc, with nominal values of 12Vdc and 24Vdc. The sensor is constructed with a PP (Polypropylene) housing and sensing face, and a PUR (Polyurethane) cable jacket. It comes pre-wired with a 30cm / 12" pigtail PUR cable that terminates with a 4-pin M12 Eurofast QD male connector. The sensor has a 5.5mm thick rectangular body and offers an IP65 degree of protection. It can operate at a maximum switching frequency of 50Hz and is suitable for ambient air temperatures ranging from -10°C to +60°C. The sensor includes 1 x digital output (10-30Vdc; NPN; 100mA max.) and has a no-load current consumption of 15mA. Its sensing distance is 10mm, and it features protection functions against short-circuit (pulsed), overload, and reverse polarity. The operating mode of the sensor is NO (Normally Open).

Turck

BCE10-QF5.5-AN6X2 Turck Capacitive Sensors

Part#:BCE10-QF5.5-AN6X2

Manufacturer:Turck

Alt. Part#:100029093

Product Details

Product condition

BCE10-QF5.5-AN6X2 Description

Turck Disclaimer:

Relevant products

BCE10-S30-VP6X

BCE10-QF5.5-AP6X2-0.3-RS4

BCE10-QF5.5-AN6X2/S250

BCE10-QF5.5-AN6X2-0.3-RS4

BCE10-P30SR-VP6X2

BCE10-QF5.5-AP6X2

BCE10-P30SR-VN6X2

BCE10-S30-VN6X-H1141

BCE10-S30-VP6X

BCE10-QF5.5-AP6X2-0.3-RS4

BCE10-QF5.5-AN6X2/S250

BCE10-QF5.5-AN6X2-0.3-RS4

BCE10-P30SR-VP6X2

BCE10-QF5.5-AP6X2

BCE10-P30SR-VN6X2

BCE10-S30-VN6X-H1141

BCE10-S30-VP6X

BCE10-QF5.5-AP6X2-0.3-RS4

BCE10-QF5.5-AN6X2/S250

BCE10-QF5.5-AN6X2-0.3-RS4

We are a proud member of: