PS58 Schneider Electric Industrial Automation Components
Part#:PS58
Manufacturer:Schneider Electric
Product Lifecycle:Active
Get a quick Quote!
Turck PS58 is a sensor designed for pressure measurement and switching, belonging to the PS300 series. It features programmable relative pressure sensing capabilities with a set point range of 1-100% and a reset point range of 0.5-99.5%. The sensor can measure pressure in units of bar, psi, kPa, MPa, and miscellaneous others. It operates within an ambient air temperature range of -40°C to +80°C and can measure fluid medium temperatures from -40°C to +85°C. The PS58 has a cylindrical body with a diameter of 34mm and is equipped with a 4-pin M12 Eurofast QD male connector and a G1/4" (1/4" BSPP) threaded female process port for connection. It offers an IP69K degree of protection and requires a supply voltage of 18-30Vdc (24Vdc nominal). The sensor's housing and wetted parts are made of 1.4305 (303) stainless steel, with a ceramics Al2O3 pressure transducer and a stainless steel pressure connection. It can handle pressures from 0 to +600bar (0 to +8700psig) and features an IO-Link communication protocol. The PS58 operates in either NO (Normally Open) or NC (Normally Closed) modes, which are programmable, and includes two digital outputs (15-30Vdc; NPN/PNP). It has a maximum switching frequency of 180Hz, a response time ranging from 50 to 600ms, and offers protection functions against short-circuit (pulsed) and reverse polarity. The sensor's measurement accuracy includes a set point accuracy of +/-0.5% FS, analog accuracy of <=+/-0.5% FS, with repeatability <=0.5% of the measuring range, and zero shift/span shift <=0.15% of the measuring range per °C. It has a control circuit rated current of 200mA and a current consumption of 50mA, with time delays for ON-delay and OFF-delay settings ranging from 0 to 50.
About the manufacturer: Schneider Electric is one of the manufacturers that offers Industrial Automation Components that you can order at Quotebeam.com. We provide digital solutions for energy and automation that improve efficiency and support sustainability. Our comprehensive solutions include cutting-edge energy technologies, real-time automation, software, and services for residential, commercial, and industrial settings.
Check out the PS58 Schneider Electric price in the box on the right side or send a quick quote.
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
PS58 Description
Turck PS58 is a sensor designed for pressure measurement and switching, belonging to the PS300 series. It features programmable relative pressure sensing capabilities with a set point range of 1-100% and a reset point range of 0.5-99.5%. The sensor can measure pressure in units of bar, psi, kPa, MPa, and miscellaneous others. It operates within an ambient air temperature range of -40°C to +80°C and can measure fluid medium temperatures from -40°C to +85°C. The PS58 has a cylindrical body with a diameter of 34mm and is equipped with a 4-pin M12 Eurofast QD male connector and a G1/4" (1/4" BSPP) threaded female process port for connection. It offers an IP69K degree of protection and requires a supply voltage of 18-30Vdc (24Vdc nominal). The sensor's housing and wetted parts are made of 1.4305 (303) stainless steel, with a ceramics Al2O3 pressure transducer and a stainless steel pressure connection. It can handle pressures from 0 to +600bar (0 to +8700psig) and features an IO-Link communication protocol. The PS58 operates in either NO (Normally Open) or NC (Normally Closed) modes, which are programmable, and includes two digital outputs (15-30Vdc; NPN/PNP). It has a maximum switching frequency of 180Hz, a response time ranging from 50 to 600ms, and offers protection functions against short-circuit (pulsed) and reverse polarity. The sensor's measurement accuracy includes a set point accuracy of +/-0.5% FS, analog accuracy of <=+/-0.5% FS, with repeatability <=0.5% of the measuring range, and zero shift/span shift <=0.15% of the measuring range per °C. It has a control circuit rated current of 200mA and a current consumption of 50mA, with time delays for ON-delay and OFF-delay settings ranging from 0 to 50.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Schneider Electric
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Schneider Electric Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Schneider Electric Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Schneider Electric, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
