PS38

Square D by Schneider Electric PS38 is a mounting accessory designed as a panelskirt or skirting box-type 1. It is intended for surface mounting and is constructed from steel. The dimensions of the PS38 are H991mm x W508mm x D146mm (H39" x W20" x D5.75"). This part is characterized by a degree of protection classified as NEMA 1, indicating a specific level of enclosure protection.

Schneider Electric

PS27

Verified stock: 0

Square D by Schneider Electric PS27 is a mounting accessory designed as a panelskirt or skirting box of type 1. It is intended for surface mounting and is constructed from steel. The dimensions of the PS27 are H711mm x W508mm x D146mm (H28" x W20" x D5.75"). This part is characterized by a degree of protection classified as NEMA 1, indicating a specific level of enclosure protection.

Schneider Electric

PS23

Verified stock: 0

Turck PS23 is a sensor designed for pressure measurement within the PS500 series, featuring a differential programmable pressure sensor with a set point range of 1-100% and a reset point range of 0.5-99.5%. It supports multiple measurement units including bar, psi, kPa, MPa, and miscellaneous others. The sensor operates in ambient air temperatures ranging from -40°C to +80°C and has a rotatable housing design for flexible installation. It connects via a 4-pin M12 Eurofast QD male connector and a G1/4" (1/4" BSPP) threaded female process port. The PS23 offers an IP67 degree of protection and requires a supply voltage of 18-30Vdc (24Vdc nominal). Its cylindrical body is constructed from 1.4305 (303) stainless steel, with wetted parts and pressure connection of the same material, and a ceramics Al2O3 pressure transducer. The sensor can handle pressures from 0 to +250bar and uses the IO-Link communication protocol. It can operate in either NO (Normally Open) or NC (Normally Closed) modes, which are programmable. Protection functions include short-circuit (pulsed) and reverse polarity. The response time ranges from 50 to 600ms, and it features 1 x analog output (4-20mA; can also be used as a NPN/PNP digital output). Measurement accuracy includes set point accuracy of +/-0.5% FS, analog accuracy of ≤+/-0.5% FS, with repeatability ≤0.5% of the measuring range, and zero shift/span shift ≤0.15% of the measuring range per °C. The current consumption is 50mA, and it has a maximum switching frequency of 180Hz.

Schneider Electric

PS21

Verified stock: 0

Square D by Schneider Electric PS21 is a mounting accessory designed as a panelskirt or skirting box of type 1. It is intended for surface mounting and is constructed from steel. The dimensions of the PS21 are H559mm x W508mm x D146mm (H22" x W20" x D5.75"). This accessory is characterized by a degree of protection classified as NEMA 1, indicating a specific level of enclosure protection.

Schneider Electric

IATAMT001029421

Verified stock: 0

PS2 POWER RING DIST. BOX

Schneider Electric

PS22

Verified stock: 0

Banner Engineering PS22 is an interface unit designed with a TEACH mode for simplified setup and configuration. It operates within an ambient air temperature range of -40 to +70°C, ensuring adaptability to various working environments. The unit features screw connections for secure and reliable physical interfacing. It is powered by a supply voltage ranging from 21Vac to 27Vac, with a nominal voltage of 24Vac. The PS22 includes 1 x digital output with SPDT contact type and 1 x digital input compatible with NPN relay signals, operating within a voltage range of 21-27Vac at 50/60Hz.

Schneider Electric

PS58

Verified stock: 0

Turck PS58 is a sensor designed for pressure measurement and switching, belonging to the PS300 series. It features programmable relative pressure sensing capabilities with a set point range of 1-100% and a reset point range of 0.5-99.5%. The sensor can measure pressure in units of bar, psi, kPa, MPa, and miscellaneous others. It operates within an ambient air temperature range of -40°C to +80°C and can measure fluid medium temperatures from -40°C to +85°C. The PS58 has a cylindrical body with a diameter of 34mm and is equipped with a 4-pin M12 Eurofast QD male connector and a G1/4" (1/4" BSPP) threaded female process port for connection. It offers an IP69K degree of protection and requires a supply voltage of 18-30Vdc (24Vdc nominal). The sensor's housing and wetted parts are made of 1.4305 (303) stainless steel, with a ceramics Al2O3 pressure transducer and a stainless steel pressure connection. It can handle pressures from 0 to +600bar (0 to +8700psig) and features an IO-Link communication protocol. The PS58 operates in either NO (Normally Open) or NC (Normally Closed) modes, which are programmable, and includes two digital outputs (15-30Vdc; NPN/PNP). It has a maximum switching frequency of 180Hz, a response time ranging from 50 to 600ms, and offers protection functions against short-circuit (pulsed) and reverse polarity. The sensor's measurement accuracy includes a set point accuracy of +/-0.5% FS, analog accuracy of <=+/-0.5% FS, with repeatability <=0.5% of the measuring range, and zero shift/span shift <=0.15% of the measuring range per °C. It has a control circuit rated current of 200mA and a current consumption of 50mA, with time delays for ON-delay and OFF-delay settings ranging from 0 to 50.

Schneider Electric

PS48

Verified stock: 0

Square D by Schneider Electric PS48 is a mounting accessory designed as a panelskirt or skirting box of type 1. It features surface mounting mode and is constructed from steel, ensuring durability. The dimensions of the PS48 are H1270mm x W508mm x D146mm (H50" x W20" x D5.75"), and it offers a degree of protection classified as NEMA 1, suitable for general-purpose enclosures.

Schneider Electric

PS38

Verified stock: 0

Square D by Schneider Electric PS38 is a mounting accessory designed as a panelskirt or skirting box-type 1. It is intended for surface mounting and is constructed from steel. The dimensions of the PS38 are H991mm x W508mm x D146mm (H39" x W20" x D5.75"). This part is characterized by a degree of protection classified as NEMA 1, indicating a specific level of enclosure protection.

Schneider Electric

PS27

Verified stock: 0

Square D by Schneider Electric PS27 is a mounting accessory designed as a panelskirt or skirting box of type 1. It is intended for surface mounting and is constructed from steel. The dimensions of the PS27 are H711mm x W508mm x D146mm (H28" x W20" x D5.75"). This part is characterized by a degree of protection classified as NEMA 1, indicating a specific level of enclosure protection.

Schneider Electric

PS23

Verified stock: 0

Turck PS23 is a sensor designed for pressure measurement within the PS500 series, featuring a differential programmable pressure sensor with a set point range of 1-100% and a reset point range of 0.5-99.5%. It supports multiple measurement units including bar, psi, kPa, MPa, and miscellaneous others. The sensor operates in ambient air temperatures ranging from -40°C to +80°C and has a rotatable housing design for flexible installation. It connects via a 4-pin M12 Eurofast QD male connector and a G1/4" (1/4" BSPP) threaded female process port. The PS23 offers an IP67 degree of protection and requires a supply voltage of 18-30Vdc (24Vdc nominal). Its cylindrical body is constructed from 1.4305 (303) stainless steel, with wetted parts and pressure connection of the same material, and a ceramics Al2O3 pressure transducer. The sensor can handle pressures from 0 to +250bar and uses the IO-Link communication protocol. It can operate in either NO (Normally Open) or NC (Normally Closed) modes, which are programmable. Protection functions include short-circuit (pulsed) and reverse polarity. The response time ranges from 50 to 600ms, and it features 1 x analog output (4-20mA; can also be used as a NPN/PNP digital output). Measurement accuracy includes set point accuracy of +/-0.5% FS, analog accuracy of ≤+/-0.5% FS, with repeatability ≤0.5% of the measuring range, and zero shift/span shift ≤0.15% of the measuring range per °C. The current consumption is 50mA, and it has a maximum switching frequency of 180Hz.

Schneider Electric

PS21

Verified stock: 0

Square D by Schneider Electric PS21 is a mounting accessory designed as a panelskirt or skirting box of type 1. It is intended for surface mounting and is constructed from steel. The dimensions of the PS21 are H559mm x W508mm x D146mm (H22" x W20" x D5.75"). This accessory is characterized by a degree of protection classified as NEMA 1, indicating a specific level of enclosure protection.

Schneider Electric

IATAMT001029421

Verified stock: 0

PS2 POWER RING DIST. BOX

Schneider Electric

PS22

Verified stock: 0

Banner Engineering PS22 is an interface unit designed with a TEACH mode for simplified setup and configuration. It operates within an ambient air temperature range of -40 to +70°C, ensuring adaptability to various working environments. The unit features screw connections for secure and reliable physical interfacing. It is powered by a supply voltage ranging from 21Vac to 27Vac, with a nominal voltage of 24Vac. The PS22 includes 1 x digital output with SPDT contact type and 1 x digital input compatible with NPN relay signals, operating within a voltage range of 21-27Vac at 50/60Hz.

Schneider Electric

PS58

Verified stock: 0

Turck PS58 is a sensor designed for pressure measurement and switching, belonging to the PS300 series. It features programmable relative pressure sensing capabilities with a set point range of 1-100% and a reset point range of 0.5-99.5%. The sensor can measure pressure in units of bar, psi, kPa, MPa, and miscellaneous others. It operates within an ambient air temperature range of -40°C to +80°C and can measure fluid medium temperatures from -40°C to +85°C. The PS58 has a cylindrical body with a diameter of 34mm and is equipped with a 4-pin M12 Eurofast QD male connector and a G1/4" (1/4" BSPP) threaded female process port for connection. It offers an IP69K degree of protection and requires a supply voltage of 18-30Vdc (24Vdc nominal). The sensor's housing and wetted parts are made of 1.4305 (303) stainless steel, with a ceramics Al2O3 pressure transducer and a stainless steel pressure connection. It can handle pressures from 0 to +600bar (0 to +8700psig) and features an IO-Link communication protocol. The PS58 operates in either NO (Normally Open) or NC (Normally Closed) modes, which are programmable, and includes two digital outputs (15-30Vdc; NPN/PNP). It has a maximum switching frequency of 180Hz, a response time ranging from 50 to 600ms, and offers protection functions against short-circuit (pulsed) and reverse polarity. The sensor's measurement accuracy includes a set point accuracy of +/-0.5% FS, analog accuracy of <=+/-0.5% FS, with repeatability <=0.5% of the measuring range, and zero shift/span shift <=0.15% of the measuring range per °C. It has a control circuit rated current of 200mA and a current consumption of 50mA, with time delays for ON-delay and OFF-delay settings ranging from 0 to 50.

Schneider Electric

PS48

Verified stock: 0

Square D by Schneider Electric PS48 is a mounting accessory designed as a panelskirt or skirting box of type 1. It features surface mounting mode and is constructed from steel, ensuring durability. The dimensions of the PS48 are H1270mm x W508mm x D146mm (H50" x W20" x D5.75"), and it offers a degree of protection classified as NEMA 1, suitable for general-purpose enclosures.

Schneider Electric

PS38

Verified stock: 0

Square D by Schneider Electric PS38 is a mounting accessory designed as a panelskirt or skirting box-type 1. It is intended for surface mounting and is constructed from steel. The dimensions of the PS38 are H991mm x W508mm x D146mm (H39" x W20" x D5.75"). This part is characterized by a degree of protection classified as NEMA 1, indicating a specific level of enclosure protection.

Schneider Electric

PS27

Verified stock: 0

Square D by Schneider Electric PS27 is a mounting accessory designed as a panelskirt or skirting box of type 1. It is intended for surface mounting and is constructed from steel. The dimensions of the PS27 are H711mm x W508mm x D146mm (H28" x W20" x D5.75"). This part is characterized by a degree of protection classified as NEMA 1, indicating a specific level of enclosure protection.

Schneider Electric

PS23

Verified stock: 0

Turck PS23 is a sensor designed for pressure measurement within the PS500 series, featuring a differential programmable pressure sensor with a set point range of 1-100% and a reset point range of 0.5-99.5%. It supports multiple measurement units including bar, psi, kPa, MPa, and miscellaneous others. The sensor operates in ambient air temperatures ranging from -40°C to +80°C and has a rotatable housing design for flexible installation. It connects via a 4-pin M12 Eurofast QD male connector and a G1/4" (1/4" BSPP) threaded female process port. The PS23 offers an IP67 degree of protection and requires a supply voltage of 18-30Vdc (24Vdc nominal). Its cylindrical body is constructed from 1.4305 (303) stainless steel, with wetted parts and pressure connection of the same material, and a ceramics Al2O3 pressure transducer. The sensor can handle pressures from 0 to +250bar and uses the IO-Link communication protocol. It can operate in either NO (Normally Open) or NC (Normally Closed) modes, which are programmable. Protection functions include short-circuit (pulsed) and reverse polarity. The response time ranges from 50 to 600ms, and it features 1 x analog output (4-20mA; can also be used as a NPN/PNP digital output). Measurement accuracy includes set point accuracy of +/-0.5% FS, analog accuracy of ≤+/-0.5% FS, with repeatability ≤0.5% of the measuring range, and zero shift/span shift ≤0.15% of the measuring range per °C. The current consumption is 50mA, and it has a maximum switching frequency of 180Hz.

Schneider Electric

PS21

Verified stock: 0

Square D by Schneider Electric PS21 is a mounting accessory designed as a panelskirt or skirting box of type 1. It is intended for surface mounting and is constructed from steel. The dimensions of the PS21 are H559mm x W508mm x D146mm (H22" x W20" x D5.75"). This accessory is characterized by a degree of protection classified as NEMA 1, indicating a specific level of enclosure protection.

Schneider Electric

PS28 Schneider Electric Industrial Automation Components

Part#:PS28

Manufacturer:Schneider Electric

Product condition

PS28 Description

Schneider Electric Disclaimer:

Relevant products

PS38

PS27

PS23

PS21

IATAMT001029421

PS22

PS58

PS48

PS38

PS27

PS23

PS21

IATAMT001029421

PS22

PS58

PS48

PS38

PS27

PS23

PS21

We are a proud member of: