LTMR08PBD Schneider Electric Industrial Automation Components
Part#:LTMR08PBD
Manufacturer:Schneider Electric
Product Lifecycle:Active
Get a quick Quote!
Schneider Electric LTMR08PBD, part of the LTMR (TeSys T) sub-range, is a motor management controller that offers various control modes including local via terminal block, local via HMI terminal, and remote via network. It supports operating modes such as overload, independent, reverser, 2-step, 2-speed, and "Custom" mode. The device features comprehensive fault management capabilities with manual, automatic, and remote reset options, alongside protection fault counters, protection alarm counters, diagnostic fault counters, motor control function counters, fault history, and detailed fault diagnostics for internal watchdog faults, controller internal temperature, temperature sensor connection, current connection, voltage connection, motor control commands, control configuration checksum, and loss of communication. Motor statistics provided include the number of motor control commands (O.1/O.2 starts), operating time, number of starts/hour, last start I max, duration of last start, with thermal overload statistics detailing time to trip and time to restart. System operating statistics cover run, on, start, alarm, and fault statuses. The connection type is 3 measurement current transformers (control circuit) with screw-clamp terminals, and it uses the Profibus communication protocol. It is a 3 Pole device with protection functions for thermal overload, motor temperature, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, minimum and maximum current load limit variation, earth fault, and frequent starting. Rated current ranges from 0.4-8 A (maximum with CT) up to 800 A, with protection settings adjustable for various conditions. Supply voltage is 24 V DC, with a rated voltage (AC) phase-to-phase of 690 V at 50-60Hz. Measurement functions include current/phase from 0.08-1000A, earth current 0.1633 x CT ratio, average current 0.08-1000A, current imbalance between phases 0-200%, thermal capacity level 0-200%, and motor temperature rise 0-6500 Ohm.
About the manufacturer: Schneider Electric is one of the manufacturers that offers Industrial Automation Components that you can order at Quotebeam.com. We provide digital solutions for energy and automation that improve efficiency and support sustainability. Our comprehensive solutions include cutting-edge energy technologies, real-time automation, software, and services for residential, commercial, and industrial settings.
Check out the LTMR08PBD Schneider Electric price in the box on the right side or send a quick quote.
Product Details
- Protection Type Thermal protection Load fluctuation Power factor variation Phase failure Overload Reverse polarity protection Overload (long time) Earth-leakage protection Locked rotor Thermal overload protection Phase un
- Measurement Accuracy 5...15 % earth fault current internal measurement 1 % voltage 100...830 V) 3 % power factor 5 % earth fault current external measurement +/- 30 min/year internal clock 0,02 Temperature 1 % current 5 % active and reactive
- Network And Machine Diagnosis Type Motor control command recording Running hours counter/operating time Trip history information Fault recording Starting current and time Phase fault and earth fault trip counters Remaining operating time before overload trippi
- Metering Type Earth-fault current Average current Iavg Imbalance current Phase current I1, I2, I3 RMS Temperature
- Electromagnetic Compatibility Electrostatic discharge, 3 8 kV air, 6 kV contact)EN/IEC 61000-4-2) Radiated RF fields, 3 10 V/m)EN/IEC 61000-4-3) Fast transients immunity test, level 3 2 kV)EN/IEC 61000-4-4) Fast transients immunity test, level 4 4 kV)EN/IEC 61000-4-4)
- [Ui] Rated Insulation Voltage
690 V EN/IEC 60947-1 690 V CSA C22.2 No 14 690 V UL 508- Connections - Terminals
Control circuit connector 1 0.00…0.00 in² (0.25…2.5 mm²) AWG 24...AWG 14)flexible with cable end Control circuit connector 1 0.00…0.00 in² (0.2…2.5 mm²) AWG 24...AWG 14)flexible without cable end Control circuit connector 1 0.00…0.00 in² (0.25…2- [Uimp] Rated Impulse Withstand Voltage
6 kV current or voltage measurement circuit EN/IEC 60947-4-1 0.8 kV communication circuit EN/IEC 60947-4-1 0.8 kV supply, inputs and outputs EN/IEC 60947-4-1- Permissible Power
480 VA AC-15), Ie = 2 A, 500000 cycles output) 30 W DC-13), Ie = 1.25 A, 500000 cycles output)- Associated Fuse Rating
4 A gG output 0.5 A gG control circuit- Bus Type
Profibus DP polarised 2-wire RS485 1...125 9.6 kbit/s...12 Mbit/s, SUB-D 9 2 shielded twisted pairs, type A Profibus DP polarised 2-wire RS485 1...125 9.6 kbit/s...12 Mbit/s, terminal block 2 shielded twisted pairs, type A- Load Current
5 A 250 V AC logic output 5 A 30 V DC logic output- Contacts Type And Composition
1 NO + 1 NC fault signal 3 NO- Compatibility Code
LTMR- Depth
4.82 in (122.5 mm)- Width
3.58 in (91 mm)- Web Services
Web server- Tightening Torque
Control circuit 4.43…5.31 lbf.in (0.5…0.6 N.m) flat 0.12 in (3 mm)- Connection Pitch
0.20 in (5.08 mm)- Maximum Operating Rate
1800 cyc/h- Overvoltage Category
III- Current State 0 Guaranteed
Logic input < 5 V <= 15 mA 5 ms- Net Weight
1.17 lb(US) (0.53 kg)- Height
2.40 in (61 mm)- Pollution Degree
3- Maximum Output Switching Frequency
2 Hz- Current State 1 Guaranteed
Logic input < 15 V 2...15 mA 15 ms- Logic Input Number
6- Input Current
7 mA- Short-Circuit Withstand
100 kA EN/IEC 60947-4-1- Supply Voltage Limits
20.4…26.24 V DC- Communication Port Protocol
Profibus DP- Product Or Component Type
Motor controller- Product Name
TeSys T- Current Consumption
56...127 mA- [Us] Rated Supply Voltage
24 V DC- Measurement Current
0.4…8 A- Device Application
Equipment monitoring and control- Device Short Name
LTMR- Range
TeSysProduct condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents LTMR08PBD Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Schneider Electric
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
- [Ui] Rated Insulation Voltage
Schneider Electric Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Schneider Electric Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Schneider Electric, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
