LC1D32M7 Schneider Electric Industrial Automation Components

Name: LC1D32M7
Brand: Schneider Electric

Schneider Electric LC1D32M7 Schneider Electric LC1D32M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed for 3-pole (3P; 3NO) operation. It has a rated current of 50A (AC-1) and 32A (440Vac; AC-3), with a mounting mode suitable for DIN rail installation. The net width of the contactor is 45 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Rated active power spans from 7.5kW at 220-230Vac to 18.5kW at 660-690Vac (all AC-3), and rated power (HP) ranges from 2HP at 115Vac in single-phase to 25HP at 575-600Vac in 3-phase (UL/CSA). The mechanical durability of the LC1D32M7 is rated at 15 million operations at no load, and its electrical durability is rated at 1.6 million operations with load. The rated voltage (AC) for phase-to-phase operation is 690 V.

Part#:LC1D32M7

Manufacturer:Schneider Electric

Product Lifecycle:Active

Get a quick Quote!

Schneider Electric LC1D32M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed for 3-pole (3P; 3NO) operation. It has a rated current of 50A (AC-1) and 32A (440Vac; AC-3), with a mounting mode suitable for DIN rail installation. The net width of the contactor is 45 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Rated active power spans from 7.5kW at 220-230Vac to 18.5kW at 660-690Vac (all AC-3), and rated power (HP) ranges from 2HP at 115Vac in single-phase to 25HP at 575-600Vac in 3-phase (UL/CSA). The mechanical durability of the LC1D32M7 is rated at 15 million operations at no load, and its electrical durability is rated at 1.6 million operations with load. The rated voltage (AC) for phase-to-phase operation is 690 V.

About the manufacturer: Schneider Electric is one of the manufacturers that offers Industrial Automation Components that you can order at Quotebeam.com. We provide digital solutions for energy and automation that improve efficiency and support sustainability. Our comprehensive solutions include cutting-edge energy technologies, real-time automation, software, and services for residential, commercial, and industrial settings.

Check out the LC1D32M7 Schneider Electric price in the box on the right side or send a quick quote.

Product Details

Product Certifications
DNV RINA LROS (Lloyds register of shipping) CCC CSA GL GOST BV UL
[Ui] Rated Insulation Voltage
Power circuit 690 V IEC 60947-4-1 Power circuit 600 V CSA Power circuit 600 V UL Signalling circuit 690 V IEC 60947-1 Signalling circuit 600 V CSA Signalling circuit 600 V UL
[Icw] Rated Short-Time Withstand Current
260 A 104 °F (40 °C) - 10 s power circuit 430 A 104 °F (40 °C) - 1 s power circuit 60 A 104 °F (40 °C) - 10 min power circuit 138 A 104 °F (40 °C) - 1 min power circuit 100 A - 1 s signalling circuit 120 A - 500 ms signalling circ
Standards
CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508
Motor Power Kw
7.5 kW 220...230 V AC 50/60 Hz AC-3) 15 kW 380...400 V AC 50/60 Hz AC-3) 15 kW 415...440 V AC 50/60 Hz AC-3) 18.5 kW 500 V AC 50/60 Hz AC-3) 18.5 kW 660...690 V AC 50/60 Hz AC-3) 7.5 kW 400 V AC 50/60 Hz AC-4)
Motor Power HP (UL / CSA)
2 hp 115 V at AC 50/60 Hz for 1 phase 5 hp 230/240 V at AC 50/60 Hz for 1 phase 7.5 hp 200/208 V at AC 50/60 Hz for 3 phase 10 hp 230/240 V at AC 50/60 Hz for 3 phase 20 hp 460/480 V at AC 50/60 Hz for 3 phase 30 hp 575/600 V at A
Tightening Torque
Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals flat Ø 6 mm Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals Philips No 2 Power circuit 22.13 lbf.in (2.5 N.m) screw clamp terminals flat Ø 6 mm Power circuit 22.13 lb
Control Circuit Voltage Limits
0.3...0.6 Uc -40…158 °F (-40…70 °C) drop-out AC 50/60 Hz 0.8...1.1 Uc -40…140 °F (-40…60 °C) operational AC 50 Hz 0.85...1.1 Uc -40…140 °F (-40…60 °C) operational AC 60 Hz 1...1.1 Uc 140…158 °F (60…70 °C) operational AC 50/60 Hz
Connections - Terminals
Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible without cable end Control circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)flexible without cable end Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)fl
Associated Fuse Rating
10 A gG signalling circuit IEC 60947-5-1 63 A gG <= 690 V type 1 power circuit 63 A gG <= 690 V type 2 power circuit
Utilisation Category
AC-4 AC-1 AC-3
Irms Rated Making Capacity
140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1 550 A 440 V power circuit IEC 60947
Auxiliary Contacts Type
Mechanically linked 1 NO + 1 NC IEC 60947-5-1 Mirror contact 1 NC IEC 60947-4-1
Hold-In Power Consumption In VA
7.5 VA 60 Hz 0.3 68 °F (20 °C)) 7 VA 50 Hz 0.3 68 °F (20 °C))
Operating Time
12...22 ms closing 4...19 ms opening
Inrush Power In VA
70 VA 60 Hz 0.75 68 °F (20 °C)) 70 VA 50 Hz 0.75 68 °F (20 °C))
Non-Overlap Time
1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
Contactor Application
Resistive load Motor control
[Ie] Rated Operational Current
32 A 140 °F (60 °C)) <= 440 V AC AC-3 power circuit 50 A 140 °F (60 °C)) <= 440 V AC AC-1 power circuit
[Ith] Conventional Free Air Thermal Current
10 A 140 °F (60 °C) signalling circuit 50 A 140 °F (60 °C) power circuit

Electrical Durability

1.65 Mcycles 32 A AC-3 <= 440 V 1.4 Mcycles 50 A AC-1 <= 440 V

Safety Reliability Level

B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1

[Ue] Rated Operational Voltage

Power circuit <= 690 V AC 25...400 Hz Power circuit <= 300 V DC

Mounting Support

Plate Rail

Power Dissipation Per Pole

2 W AC-3 5 W AC-1

Insulation Resistance

> 10 MOhm signalling circuit

Signalling Circuit Frequency

25...400 Hz

Heat Dissipation

2…3 W 50/60 Hz

Coil Technology

Without built-in suppressor module

Minimum Switching Voltage

17 V signalling circuit

Minimum Switching Current

5 mA signalling circuit

Maximum Operating Rate

3600 cyc/h 140 °F (60 °C)

Mechanical Durability

15 Mcycles

Average Impedance

2 mOhm - Ith 50 A 50 Hz power circuit

Rated Breaking Capacity

550 A 440 V power circuit IEC 60947

Front Cover

With

[Uimp] Rated Impulse Withstand Voltage

6 kV IEC 60947

[Uc] Control Circuit Voltage

220 V AC 50/60 Hz

Control Circuit Type

AC 50/60 Hz

Overvoltage Category

III

Auxiliary Contact Composition

1 NO + 1 NC

Power Pole Contact Composition

3 NO

Poles Description

Device Short Name

LC1D

Product Name

TeSys D

Product Or Component Type

Contactor

Range

TeSys

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

Relevant products

This item can ship within 5 days!

SR3B261BD

$259.14

Verified stock: 221

Schneider Electric SR3B261BD is a compact smart/programmable control unit within the SR3 sub-range, designed for DIN rail mounting. It features 26 I/Os with 10 contact outputs and operates within an ambient air temperature range of -20 to +55°C. The unit offers a memory capacity of 120 lines for ladder programming and 200 lines for FBD programming. It is equipped with an IP40-rated front panel and an IP20-rated terminal block for protection. The SR3B261BD consumes 0.3 A with extensions and 0.19 A without, and includes reverse polarity and program memory check protection functions on each power-up. It has 6 common mode analog inputs and operates on a 24 V DC supply voltage. Connection is facilitated through screw-clamp terminals. This control unit boasts an electrical durability of 500,000 operations with load and a mechanical durability of 10,000,000 operations at no load. Processing times range from 6 to 90 ms, with an operating rate of 36,000 cycles/hour at no load and 360 cycles/hour at Ie. It also features an LCD display and performs a program memory measurement function on each power-up.

Schneider Electric

This item can ship within 24h!

S18SN6RQ

$63.72

Verified stock: 1

EZ-BEAM S18 Series: Receiver; Range: 20 m; Input: 10-30 V dc; Output: Complementary NPN; 4-pin M12 Integral QD

Banner

This item can ship within 24h!

EGW-15-SC-Z0-C

$50.49

Verified stock: 25

Hiwin EG series Block

Hiwin

LC1D18M7

Verified stock: 0

Schneider Electric LC1D18M7, part of the Deca sub-range, is a magnetic contactor designed for screw connections and features three poles (3P; 3NO). It has a rated current of 32A for AC-1 and 18A for 440Vac in AC-3 conditions. This contactor is suitable for DIN rail mounting and has a net width of 45 mm. It offers a degree of protection rated at IP20 and operates within control voltage ranges of 176-242Vac (220Vac nominal; 50Hz) and 187-242Vac (220Vac nominal; 60Hz), with a rated operating voltage (Ue) of up to 690 V. The LC1D18M7 includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). It is capable of handling rated impulse voltage (Uimp) of 6 kV and rated active power ranging from 4kW at 220-230Vac to 10kW at 660-690Vac in AC-3 conditions. The rated power in horsepower (HP) varies from 1HP at 115Vac in single-phase to 15HP at 575-600Vac in three-phase, under UL/CSA standards. This contactor is designed for mechanical durability of 15 million operations at no load and electrical durability of 1.6 million operations with load, with a phase-to-phase rated voltage of 690 V.

Schneider Electric

This item can ship within 5 days!

SR3B101FU

$155.26

Verified stock: 85

Schneider Electric SR3B101FU is a compact smart/programmable control unit designed for DIN rail mounting. It falls within the SR3 sub-range and is equipped with 10 I/Os featuring contact outputs. This unit operates within an ambient air temperature range of -20 to +55°C and offers a memory capacity of 120 lines for ladder programming or 200 lines for FBD programming. It has a degree of protection rated at IP40 for the front panel and IP20 for the terminal block. The SR3B101FU is compatible with a network frequency of 50/60 Hz and includes 4 digital contact outputs. Its current consumption varies, with 0.08 A for both with and without extension at 100V, and 0.04 A with extension versus 0.03 A without extension at 240V. This unit features reverse polarity protection and performs a program memory check upon each power-up. It requires a supply voltage of 100-240 V AC and utilizes screw-clamp terminals. The electrical durability of the SR3B101FU is rated for 500,000 operations with load, and its mechanical durability reaches 10,000,000 operations at no load. Processing times range from 6 to 90 ms. It includes an LCD display, operates at a rate of 36,000 cycles/hour with no load and 360 cycles/hour at Ie, and incorporates a measurement function to check program memory each time it is powered up.

Schneider Electric

This item can ship within 5 days!