LC1D115G7 Schneider Electric Automation components

LC1D115G7 Product Details

• Product Certifications
  LROS (Lloyds register of shipping) DNV CCC GOST GL CSA UL BV RINA UKCA
• Motor Power Kw
  30 kW 220...230 V AC 50/60 Hz AC-3) 55 kW 380...400 V AC 50/60 Hz AC-3) 59 kW 415...440 V AC 50/60 Hz AC-3) 75 kW 500 V AC 50/60 Hz AC-3) 80 kW 660...690 V AC 50/60 Hz AC-3) 65 kW 1000 V AC 50/60 Hz AC-3) 18.5 kW 400 V AC 50/
• [Icw] Rated Short-Time Withstand Current
  250 A 104 °F (40 °C) - 10 min power circuit 550 A 104 °F (40 °C) - 1 min power circuit 950 A 104 °F (40 °C) - 10 s power circuit 1100 A 104 °F (40 °C) - 1 s power circuit 100 A - 1 s signalling circuit 120 A - 500 ms signalling ci
• Standards
  CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508
• [Ui] Rated Insulation Voltage
  Power circuit 600 V CSA Power circuit 600 V UL Power circuit 1000 V IEC 60947-4-1 Signalling circuit 690 V IEC 60947-1 Signalling circuit 600 V CSA Signalling circuit 600 V UL
• Motor Power HP (UL / CSA)
  30 hp 200/208 V at AC 50/60 Hz for 3 phase 40 hp 230/240 V at AC 50/60 Hz for 3 phase 75 hp 460/480 V at AC 50/60 Hz for 3 phase 100 hp 575/600 V at AC 50/60 Hz for 3 phase
• Tightening Torque
  Control circuit 10.62 lbf.in (1.2 N.m) screw clamp terminals flat Ø 6 mm Control circuit 10.62 lbf.in (1.2 N.m) screw clamp terminals Philips No 2 Power circuit 106.21 lbf.in (12 N.m) connector hexagonal 0.16 in (4 mm)
• Connections - Terminals
  Control circuit screw clamp terminals 2 0.00…0.00 in² (1…2.5 mm²)flexible with cable end Control circuit screw clamp terminals 1 0.00…0.00 in² (1…2.5 mm²)flexible with cable end Control circuit screw clamp terminals 1 0.00…0.00 in² (1…2.5 mm²)fl
• Control Circuit Voltage Limits
  0.3...0.5 Uc -40…158 °F (-40…70 °C) drop-out AC 50/60 Hz 0.8...1.15 Uc -40…131 °F (-40…55 °C) operational AC 50/60 Hz 1...1.15 Uc 131…158 °F (55…70 °C) operational AC 50/60 Hz
• Associated Fuse Rating
  250 A gG <= 690 V type 1 power circuit 200 A gG <= 690 V type 2 power circuit 10 A gG signalling circuit
• Irms Rated Making Capacity
  1260 A 440 V power circuit IEC 60947 140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1
• Utilisation Category
  AC-1 AC-4 AC-3
• Hold-In Power Consumption In VA
  2…18 VA 60 Hz 0.3 68 °F (20 °C)) 2…18 VA 50 Hz 0.3 68 °F (20 °C))
• Inrush Power In VA
  280…350 VA 60 Hz 0.8 68 °F (20 °C)) 280…350 VA 50 Hz 0.8 68 °F (20 °C))
• [Ie] Rated Operational Current
  200 A 140 °F (60 °C)) <= 440 V AC AC-1 power circuit 115 A 140 °F (60 °C)) <= 440 V AC AC-3 power circuit
• Non-Overlap Time
  1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
• Power Dissipation Per Pole
  24 W AC-1 7.9 W AC-3
• [Ue] Rated Operational Voltage
  Power circuit <= 1000 V AC 25...400 Hz Power circuit <= 300 V DC
• Auxiliary Contacts Type
  Mechanically linked 1 NO + 1 NC IEC 60947-5-1 Mirror contact 1 NC IEC 60947-4-1
• Safety Reliability Level
  B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
Mounting Support
Rail Plate
Electrical Durability
0.8 Mcycles 200 A AC-1 <= 440 V 0.95 Mcycles 115 A AC-3 <= 440 V
Operating Time
6...20 ms opening 20...50 ms closing
Contactor Application
Resistive load Motor control
Insulation Resistance
> 10 MOhm signalling circuit
Minimum Switching Voltage
17 V signalling circuit
Minimum Switching Current
5 mA signalling circuit
Signalling Circuit Frequency
25...400 Hz
Heat Dissipation
3…8 W 50/60 Hz
Coil Technology
Built-in bidirectional peak limiting diode suppressor
Maximum Operating Rate
2400 cyc/h 60 °C
Mechanical Durability
8 Mcycles
Front Cover
With
Rated Breaking Capacity
1100 A 440 V power circuit IEC 60947
Average Impedance
0.6 mOhm - Ith 200 A 50 Hz power circuit
[Ith] Conventional Free Air Thermal Current
200 A 140 °F (60 °C) power circuit
Control Circuit Type
AC at 50/60 Hz
Overvoltage Category
III
[Uc] Control Circuit Voltage
120 V AC 50/60 Hz
[Uimp] Rated Impulse Withstand Voltage
8 kV IEC 60947
Auxiliary Contact Composition
1 NO + 1 NC
Product Or Component Type
Contactor
Product Name
TeSys D
Power Pole Contact Composition
3 NO
Poles Description
3P
Device Short Name
LC1D
Range
TeSys

Product condition

Related documents LC1D115G7 Specs