Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

SRB-E-302FWS-TS Schmersal Safety Accessories

Schmersal SRB-E-302FWS-TS SRB-E-302FWS-TS Schmersal - Standstill monitors and time relays; 2 Safety contacts, 1 Safety Output; Plug-in screw terminals with coding; 1 Signalling output - status safety module; 1 Signalling output - failure massage dynamic; Detects standstill using 1 or 2 impulse sensors; addit
Schmersal

Part#:SRB-E-302FWS-TS

Manufacturer:Schmersal

Alt. Part#:103014754

Product Lifecycle:Active

In-stock parts: 2

Nov 15, 2024

SRB-E-302FWS-TS Schmersal - Standstill monitors and time relays; 2 Safety contacts, 1 Safety Output; Plug-in screw terminals with coding; 1 Signalling output - status safety module; 1 Signalling output - failure massage dynamic; Detects standstill using 1 or 2 impulse sensors; addit

About the manufacturer: Schmersal is one of the manufacturers that offers Safety Accessories that you can order at Quotebeam.com. Schmersal produces a wide range of high-quality switchgears specifically engineered to protect machinery and facilities in industrial automation and the elevator industry.

Check out the SRB-E-302FWS-TS Schmersal price in the box on the right side or send a quick quote.

Product Details

  • Current, Utilisation category DC12
    0.1 A
  • Conduction resistance, maximum
    40 Ω
  • Voltage, Utilisation category DC12
    24 VDC
  • Voltage, Utilisation category AC15
    230 VAC
  • Current, Utilisation category AC-15
    4 A
  • Current, Utilisation category DC13
    4 A
  • Voltage, Utilisation category DC13
    24 VDC
  • Voltage drop Ud, maximum
    0.5 V
  • Electrical power consumption
    3 W
  • Pull-in delay at RESET, typically
    150 ms
  • ON delay at automatic start
    Adjustable
  • Note (Contact resistance)
    in new state
  • Drop-out delay in case of power failure, typically
    10 ms
  • Rated control voltage at DC, maximum
    28.8 VDC
  • Drop-out delay in case of emergency, typically
    10 ms
  • Rated AC voltage for controls at DC minimum
    19.2 VDC
  • Overvoltage category
    III
  • Degree of pollution to IEC/EN 60664-1
    2
  • Rated impulse withstand voltage, relay output Uimp
    4 kV
  • Storage and transport temperature, maximum
    +85 °C
  • Ambient temperature, maximum
    +60 °C
  • Ambient temperature, minimum
    -25 °C
  • Degree of protection of clips or terminals
    IP20
  • Degree of protection of the mounting space
    IP54
  • Tightening torque of Clips
    0.5 Nm
  • Terminal Connector
    Screw connection, plug-in, rigid or flexible
  • Terminal designations
    IEC 60947-1
  • EMC rating
    EMC-Directive
  • Switching capacity, minimum
    10 mA
  • Switching capacity, maximum
    24 VDC
  • Current leakage Ir
    1 mA
  • Switching frequency, maximum
    0.3 Hz
  • Pull-in delay at automatic start, maximum, typically
    150 ms
  • Contact resistance, maximum
    0.1 Ω
  • Operating current
    125 mA
  • Rated operating voltage
    24 VDC -20%/+20%, residual ripple max. 10%
  • Rated impulse withstand voltage, semiconductor output Uimp
    0.8 kV
  • Rated insulation voltage Ui
    250 V / 50 V
  • Restistance to shock
    30 g / 11 ms
  • Storage and transport temperature, minimum
    -40 °C
  • Resistance to vibrations to EN 60068-2-6
    10 ... 55 Hz, Amplitude 0.35 mm
  • Height
    98 mm
  • Degree of protection of the enclosure
    IP40
  • Depth
    115 mm
  • Width
    22.5 mm
  • Cable section, maximum
    2.5 mm²
  • Cable section, minimum
    0.25 mm²
  • Mounting
    Snaps onto standard DIN rail to EN 60715
  • Mechanical life, minimum
    10,000,000 Operations
  • Number of fail-safe digital outputs
    1
  • Number of safety contacts
    2
  • Number of signalling outputs
    2
  • Number of LEDs
    6
  • Automatic reset function
    Yes
  • Number of inputs for NO
    1
  • Integral System Diagnostics, status
    Yes
  • Reset edge detection
    Yes
  • Number of inputs for NC
    2
  • Earth connection detection
    Yes
  • Gross weight
    170 g
  • Standards
    EN ISO 13849-1, EN 60947-5-1, EN 60204-1
  • Material of the contacts, electrical
    Ag-Ni, self-cleaning, positive drive
  • Stop-Category
    0
  • Electronic Fuse
    Yes
  • Feedback circuit
    Yes
  • Short-circuit recognition
    Yes
  • Wire breakage detection
    Yes
  • Start input
    Yes
  • Enclosure material
    Glass-fibre reinforced thermoplastic, ventilated
  • Climatic stress
    EN 60068-2-78

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging


SRB-E-302FWS-TS Description

SRB-E-302FWS-TS Schmersal - Standstill monitors and time relays; 2 Safety contacts, 1 Safety Output; Plug-in screw terminals with coding; 1 Signalling output - status safety module; 1 Signalling output - failure massage dynamic; Detects standstill using 1 or 2 impulse sensors; addit



Related documents SRB-E-302FWS-TS Specs

This item can ship within 24h!

1-year warranty

$485.10

Stock:

2

Select Qty:

$485.10

$485.10 each

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Schmersal

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Schmersal Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Schmersal Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Schmersal, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo