Bryan Obida

We are online

Monday - Friday 6AM - 6PM PST

SRB-E-212ST Schmersal Safety Controllers

Schmersal SRB-E-212ST SRB-E-212ST Schmersal - Safety-monitoring modules; Stop category 1 (multifunctional); Plug-in screw terminals with coding; STOP 0 / 1 Function; 1 oder 2-channel control; 2 safety contacts STOP 0; 1 Safety output STOP 1; Drop-out delay 0 … 30
Schmersal

Part#:SRB-E-212ST

Manufacturer:Schmersal

Alt. Part#:103007222

Product Lifecycle:Active

In-stock parts: 5

Nov 21, 2024

SRB-E-212ST Schmersal - Safety-monitoring modules; Stop category 1 (multifunctional); Plug-in screw terminals with coding; STOP 0 / 1 Function; 1 oder 2-channel control; 2 safety contacts STOP 0; 1 Safety output STOP 1; Drop-out delay 0 … 30

About the manufacturer: Schmersal is one of the manufacturers that offers Safety Controllers that you can order at Quotebeam.com. Schmersal produces a wide range of high-quality switchgears specifically engineered to protect machinery and facilities in industrial automation and the elevator industry.

Check out the SRB-E-212ST Schmersal price in the box on the right side or send a quick quote.

Product Details

  • EMC rating
    EMC-Directive
  • Voltage, Utilisation category DC12
    24 VDC
  • Conduction resistance, maximum
    40 Ω
  • Switching capacity, minimum
    10 VDC
  • Switching capacity, maximum
    6 A
  • Current, Utilisation category, DC13
    4 A
  • Voltage, Utilisation category, DC13
    24 VDC
  • Voltage, Utilisation category, AC15
    230 VAC
  • Current, Utilisation category DC12
    0.1 A
  • Voltage, Utilisation category DC13
    24 VDC
  • Switching frequency, maximum
    0.3 Hz
  • Pull-in delay at RESET, typically
    150 ms
  • Drop-out delay in case of power failure, typically
    10 ms
  • Pull-in delay at automatic start, maximum, typically
    150 ms
  • Note (Contact resistance)
    in new state
  • Contact resistance, maximum
    0.1 Ω
  • Rated operating voltage
    24 VDC -20%/+20%, residual ripple max. 10%
  • Rated impulse withstand voltage, semiconductor output Uimp
    0.8 kV
  • Degree of pollution to IEC/EN 60664-1
    2
  • Overvoltage category
    III
  • Restistance to shock
    30 g / 11 ms
  • Resistance to vibrations to EN 60068-2-6
    10 ... 55 Hz, Amplitude 0.35 mm
  • Storage and transport temperature, minimum
    -40 °C
  • Degree of protection of the enclosure
    IP40
  • Tightening torque of Clips
    0.5 Nm
  • Terminal Connector
    Screw connection, plug-in, rigid or flexible
  • Cable section, maximum
    2.5 mm²
  • Mechanical life, minimum
    10,000,000 Operations
  • Current, Utilisation category, AC15
    4 A
  • Current, Utilisation category DC13
    2 A
  • Current leakage Ir
    1 mA
  • Voltage drop Ud, maximum
    0.5 V
  • Drop-out delay in case of emergency, typically
    10 ms
  • Electrical power consumption
    3 W
  • Rated control voltage at DC, maximum
    28.8 VDC
  • Rated AC voltage for controls at DC minimum
    19.2 VDC
  • Rated impulse withstand voltage, relay output Uimp
    4 kV
  • Degree of protection of clips or terminals
    IP20
  • Storage and transport temperature, maximum
    +85 °C
  • Ambient temperature, maximum
    +60 °C
  • Ambient temperature, minimum
    -25 °C
  • Degree of protection of the mounting space
    IP54
  • Height
    98 mm
  • Depth
    115 mm
  • Width
    22.5 mm
  • Cable section, minimum
    0.25 mm²
  • Terminal designations
    IEC/EN 60947-1
  • Mounting
    Snaps onto standard DIN rail to EN 60715
  • Number of Signalling outputs, STOP 1
    1
  • Number of Signalling outputs, STOP 0
    1
  • Number of openers
    2
  • Number of fail-safe outputs, Stop 1
    1
  • Number of shutters
    1
  • Number of Safety contacts, STOP 0
    2
  • Integral System Diagnostics, error code
    Yes
  • Number of LEDs
    6
  • Earth connection detection
    Yes
  • Reset edge detection
    Yes
  • Integral System Diagnostics, status
    Yes
  • Automatic reset function
    Yes
  • Feedback circuit
    Yes
  • Start input
    Yes
  • Removable Terminals
    Yes
  • Material of the contacts, electrical
    Ag-Ni, self-cleaning, positive drive
  • Standards
    IEC 61508, IEC/EN 60204-1, EN 60947-5-1
  • Gross weight
    170 g
  • Wire breakage detection
    Yes
  • Short-circuit recognition
    Yes
  • Stop-Category
    0, 1
  • Enclosure material
    Glass-fibre reinforced thermoplastic, ventilated

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging


SRB-E-212ST Description

SRB-E-212ST Schmersal - Safety-monitoring modules; Stop category 1 (multifunctional); Plug-in screw terminals with coding; STOP 0 / 1 Function; 1 oder 2-channel control; 2 safety contacts STOP 0; 1 Safety output STOP 1; Drop-out delay 0 … 30



Related documents SRB-E-212ST Specs

This item can ship within 24h!

1-year warranty

$426.80

Stock:

5

Select Qty:

$426.80

$426.80 each

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Schmersal

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Schmersal Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Schmersal Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Schmersal, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo