3274206 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Number of levels
  1
• Color
  orange
• Degree of pollution
  3
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of flexion and pull-out test
  Test passed
• Result of temperature-rise test
  Test passed
• Short-time current
  1.2 kA
• Result of aging test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Number of shocks per direction
  3
• Number of connections
  13
• Insulating material
  PA
• Maximum total current
  57 A (with 10 mm² conductor cross section)
• Open side panel
  No
• Tensile test result
  Test passed
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section AWG max.
8
Nominal cross section feed-in
6 mm²
Overvoltage category
III
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Result of surge voltage test
Test passed
Finger protection
guaranteed
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141120
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Potentials
1
Flammability rating according to UL 94
V0
Nominal current IN
41 A (with 6 mm² conductor cross section)
Nominal voltage UN
690 V
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
41 mm
Conductor cross section solid min.
1 mm²
Conductor cross section flexible min.
0.5 mm²
Min. AWG conductor cross section, flexible
20
Connection cross sections directly pluggable
1 mm² 10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Rated surge voltage
8 kV
Insulating material group
I
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Setpoint
5 N
Conductor cross section short circuit testing
10 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
28.6 mm
Height NS 15
31.4 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141121
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Connection
Feed-in stage
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Value
1 mm²
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
ETIM 7.0
EC000897
UNSPSC 19.0
39121410