3274182 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  7
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Open side panel
  No
• Result of surge voltage test
  Test passed
• Tight fit on carrier
  NS 35
• Result of voltage-drop test
  Test passed
• Short-time current
  1.2 kA
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Acceleration
  30g
• Shock form
  Half-sine
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Width
  25.6 mm
• Conductor cross section flexible max.
  10 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  6 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.5 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 4.0
  27141121
• ECLASS 10.0.1
  27141120
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
Nominal cross section
2.5 mm²
Overvoltage category
III
Maximum load current
57 A (with 10 mm² conductor cross section)
Nominal voltage UN
690 V
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
10 mm²
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid max.
10 mm²
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141121
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Number of levels
1
Nominal cross section feed-in
6 mm²
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Setpoint
5 N
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section solid min.
1 mm²
Max. AWG conductor cross section, flexible
10
Connection cross sections directly pluggable
1 mm² 10 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Degree of pollution
3
Rated surge voltage
8 kV
Maximum total current
57 A (with 10 mm² conductor cross section)
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Length
28.6 mm
Stripping length
10 mm ... 12 mm
Conductor cross section AWG max.
8
Min. AWG conductor cross section, flexible
20
Connection
Feed-in stage
Internal cylindrical gage
A3
Value
1 mm²
ECLASS 5.0
27141120
ECLASS 5.1
27141120
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
Potentials
1
Insulating material
PA
Color
violet
Nominal current IN
41 A (with 6 mm² conductor cross section)
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Tensile test result
Test passed
Result of aging test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
Shock test result
Test passed
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 15
31.4 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 7.0
27141120
ECLASS 9.0
27141120
UNSPSC 18.0
39121410
UNSPSC 11
39121410