3274158 Phoenix Contact Terminal Blocks

Product Details

• Short circuit stability result
  Test passed
• Result of aging test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock test result
  Test passed
• Number of shocks per direction
  3
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Width
  46.9 mm
• Stripping length
  8 mm ... 10 mm
• Conductor cross section AWG min.
  26
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Potentials
  1
• Rated surge voltage
  8 kV
• Nominal current IN
  24 A
• Maximum total current
  48 A
• Result of power-frequency withstand voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.14 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Permissible humidity (storage/transport)
30 % ... 70 %
Nominal cross section
2.5 mm²
Degree of pollution
3
Open side panel
No
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Short-time current
0.48 kA
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 15
31.4 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A3
ECLASS 4.0
27141121
ECLASS 5.1
27141120
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Overvoltage category
III
Insulating material group
I
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Conductor cross section short circuit testing
4 mm²
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section AWG max.
12
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 4.1
27141121
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Static insulating material application in cold
-60 °C
Length
28.6 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible max.
2.5 mm²
Min. AWG conductor cross section, flexible
26
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 7.0
27141120
UNSPSC 13.2
39121410
Number of connections
18
Maximum load current
32 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Finger protection
guaranteed
Setpoint
1 N
ETIM 6.0
EC000897
UNSPSC 11
39121410
Bending test turns
135
Result of temperature-rise test
Test passed
ECLASS 6.0
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 21.0
39121410
Flammability rating according to UL 94
V0
Power frequency withstand voltage setpoint
1.89 kV
Result of voltage-drop test
Test passed
UNSPSC 6.01
30211811
Number of levels
1
Insulating material
PA
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Tight fit on carrier
NS 35
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
Color
black
Nominal voltage UN
690 V
ETIM 4.0
EC000897
UNSPSC 19.0
39121410