3274138 Phoenix Contact Terminal Blocks

Product Details

• Shock duration
  18 ms
• Nominal cross section
  2.5 mm²
• Insulating material group
  I
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test turns
  135
• Result of tight fit on support
  Test passed
• Short circuit stability result
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Potentials
  1
• Rated surge voltage
  8 kV
• Maximum total current
  48 A
• Nominal voltage UN
  690 V
• Result of power-frequency withstand voltage test
  Test passed
• Test duration per axis
  5 h
• Number of connections
  12
• Color
  violet
• Degree of pollution
  3
• Nominal current IN
  24 A
• Back of the hand protection
  guaranteed
Result of flexion and pull-out test
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 15
31.4 mm
Conductor cross section flexible min.
0.14 mm²
UNSPSC 6.01
30211811
UNSPSC 11
39121410
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Flammability rating according to UL 94
V0
Maximum load current
32 A
Result of surge voltage test
Test passed
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
31.5 mm
Connection method
Push-in connection
Connection in acc. with standard
IEC 60947-7-1
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 6.0
27141100
Number of levels
1
Insulating material
PA
Open side panel
No
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
28.6 mm
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141120
ECLASS 7.0
27141120
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Setpoint
1 N
Short-time current
0.48 kA
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Conductor cross section flexible max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141121
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.34 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
ECLASS 10.0.1
27141120
ECLASS 4.1
27141121
Finger protection
guaranteed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
4 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section solid max.
4 mm²
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141120