3274044 Phoenix Contact Terminal Blocks

3274044 Product Details

• Number of levels
  1
• Potentials
  1
• Nominal cross section feed-in
  10 mm²
• Flammability rating according to UL 94
  V0
• Maximum total current
  63 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Number of connections
  19
• Color
  white
• Insulating material group
  I
• Maximum load current
  57 A
• Finger protection
  guaranteed
• Test spectrum
  Service life test category 2, bogie-mounted
• ASD level
  6.12 (m/s2)2/Hz
• Shock duration
  18 ms
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Nominal cross section
  4 mm²
• Rated surge voltage
  6 kV
• Overvoltage category
  III
Nominal voltage UN
450 V
Result of thermal test
Test passed
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ECLASS 11.0
27141120
ETIM 7.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Degree of pollution
3
Value
1 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Width
64.8 mm
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141120
ECLASS 4.1
27141121
ETIM 3.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 11
39121410
Internal cylindrical gage
A3
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Conductor cross section solid min.
1 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141121
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
Nominal current IN
57 A
Open side panel
No
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Insulating material
PA
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Length
28.6 mm
Conductor cross section solid max.
16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Connection cross sections directly pluggable
1 mm² 16 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section flexible max.
10 mm²
Connection
Feed-in stage
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height
22.7 mm
Stripping length
12 mm ... 14 mm
Conductor cross section AWG min.
20
Conductor cross section AWG max.
6
Min. AWG conductor cross section, flexible
20
Back of the hand protection
guaranteed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Max. AWG conductor cross section, flexible
8
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²

Product condition