3274006 Phoenix Contact Terminal Blocks

3274006 Product Details

• Number of levels
  1
• Rated surge voltage
  6 kV
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Value
  1 mm²
• Nominal cross section feed-in
  10 mm²
• Overvoltage category
  III
• Maximum total current
  63 A
• Result of thermal test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Number of shocks per direction
  3
• Flammability rating according to UL 94
  V0
• Maximum load current
  57 A
• Back of the hand protection
  guaranteed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Test spectrum
  Service life test category 2, bogie-mounted
• Test duration per axis
  5 h
• Open side panel
  No
• Oscillation, broadband noise test result
  Test passed
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2018-05
• Shock duration
  18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section solid min.
0.5 mm²
Max. AWG conductor cross section, flexible
8
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Number of connections
7
Insulating material
PA
Nominal current IN
57 A
Nominal voltage UN
450 V
Finger protection
guaranteed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
28.6 mm
Stripping length
12 mm ... 14 mm
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Connection
Feed-in stage
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
Nominal cross section
4 mm²
Insulating material group
I
Acceleration
30g
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
27.9 mm
Conductor cross section solid max.
16 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
ECLASS 9.0
27141120
Color
orange
Degree of pollution
3
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
22.7 mm
Conductor cross section AWG min.
20
Min. AWG conductor cross section, flexible
20
Internal cylindrical gage
A4
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 6.0
EC000897
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section AWG max.
6
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Connection cross sections directly pluggable
0.5 mm² 16 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ETIM 7.0
EC000897

Product condition