3274005 Phoenix Contact Terminal Blocks

Product Details

• Color
  pink
• Number of levels
  1
• Overvoltage category
  III
• Nominal current IN
  57 A
• Open side panel
  No
• Test spectrum
  Service life test category 2, bogie-mounted
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock form
  Half-sine
• Shock duration
  18 ms
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Length
  28.6 mm
• Conductor cross section solid min.
  0.5 mm²
• Conductor cross section AWG min.
  20
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.5 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  10 mm²
• Connection
  Feed-in stage
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 7.0
  27141120
Nominal cross section
4 mm²
Flammability rating according to UL 94
V0
Rated surge voltage
6 kV
Insulating material group
I
Nominal voltage UN
450 V
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
27.9 mm
Stripping length
12 mm ... 14 mm
Conductor cross section flexible max.
10 mm²
Min. AWG conductor cross section, flexible
20
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Value
1 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
Nominal cross section feed-in
10 mm²
Degree of pollution
3
Maximum total current
63 A
Result of thermal test
Test passed
Finger protection
guaranteed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
22.7 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible min.
0.5 mm²
Conductor cross section AWG max.
6
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ETIM 6.0
EC000897
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
Connection method
Push-in connection
Internal cylindrical gage
A4
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 9.0
27141120
Number of connections
7
Insulating material
PA
Maximum load current
57 A
Back of the hand protection
guaranteed
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Acceleration
30g
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid max.
16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Max. AWG conductor cross section, flexible
8
Connection cross sections directly pluggable
0.5 mm² 16 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ETIM 7.0
EC000897