3270321 Phoenix Contact Terminal Blocks

Product Details

• Test duration per axis
  5 h
• Number of shocks per direction
  3
• Ageing test for screwless modular terminal block temperature cycles
  192
• Conductor cross section solid min.
  0.34 mm²
• Conductor cross section flexible max.
  1.5 mm²
• Result of aging test
  Test passed
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Length
  111 mm
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.34 mm²
• Connection cross sections directly pluggable
  0.34 mm² 2.5 mm² 20 14
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 4.0
  27141100
• Maximum power dissipation for nominal condition
  0.56 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Test spectrum
  Service life test category 1, class B, body mounted
• Acceleration
  5g
• Shock duration
  30 ms
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Conductor cross section solid max.
  2.5 mm²
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ECLASS 9.0
27141120
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Connection in acc. with standard
IEC 60947-7-1
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 5.1
27141100
Conductor cross section AWG max.
14
Internal cylindrical gage
A1
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 7.0
27141120
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
ETIM 7.0
EC000897
Power frequency withstand voltage setpoint
1.89 kV
Number of positions
48
Color of connection elements
blue
Rated surge voltage
6 kV
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Number of levels
1
Insulating material
PA
Conductor cross section AWG min.
26
Overvoltage category
III
Nominal voltage UN
500 V
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Short-time current
0.3 kA
Result of temperature-rise test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
0.964 (m/s2)2/Hz
Shock test result
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Stripping length
8 mm ... 10 mm
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
14
Nominal cross section
1.5 mm²
Open side panel
No
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Setpoint
1 N
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Height
30 mm
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
UNSPSC 20.0
39121410
Note
The max. load current must not be exceeded by the total current of all connected conductors.
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Width
66 mm
Bending test turns
135
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Tensile test result
Test passed
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
2.5 mm²
Color
gray
Maximum load current
24 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Nominal current IN
17.5 A
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Number of connections
288
Flammability rating according to UL 94
V0
Degree of pollution
3
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)