3270200 Phoenix Contact Terminal Blocks

Product Details

• Color
  black
• Rated operating voltage
  250 V
• Maximum power dissipation
  max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
• Fuse
  G / 5 x 20
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of aging test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Shock test result
  Test passed
• Static insulating material application in cold
  -60 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height NS 35/7,5
  42.8 mm
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.25 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
• ECLASS 11.0
  27141116
• ECLASS 5.0
  27141100
• ECLASS 7.0
  27141116
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Nominal cross section
4 mm²
Overvoltage category
III
Nominal voltage UN
500 V
Open side panel
Yes
Result of tight fit on support
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Ambient temperature (assembly)
-5 °C ... 70 °C
Conductor cross section AWG max.
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 6.0
EC000899
UNSPSC 18.0
39121410
Number of connections
2
Maximum power dissipation for nominal condition
1.6 W
Connection in acc. with standard
IEC 60947-7-3
Nominal current IN
6.3 A
Surge voltage test setpoint
4.8 kV
Power frequency withstand voltage setpoint
1.5 kV
Result of flexion and pull-out test
Test passed
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
8.2 mm
Height
35.3 mm
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Connection method
Push-in connection
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100
ETIM 3.0
EC000899
Number of levels
1
Insulating material
PA
Rated surge voltage
6 kV
Maximum load current
6.3 A (the current is determined by the fuse used)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Bending test rotation speed
10 rpm
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Result of thermal test
Test passed
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
67.8 mm
Height NS 35/15
50.3 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Internal cylindrical gage
A4
Stripping length
10 mm ... 12 mm
ETIM 4.0
EC000899
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Note
Swing the locking lever to its final position before replacing the fuse.
Flammability rating according to UL 94
V0
Degree of pollution
3
Insulating material group
I
Fuse type
Glass / ceramics / ...
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Contact resistance
Test passed
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Bending test turns
135
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
End cover width
2.2 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Conductor cross section flexible max.
4 mm²
Conductor cross section AWG min.
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
ECLASS 10.0.1
27141116
ECLASS 4.1
27141100
ECLASS 9.0
27141116
ETIM 2.0
EC000897
ETIM 7.0
EC000899
UNSPSC 21.0
39121410
UNSPSC 11
39121410
UNSPSC 7.0901
39121410