3246861 Phoenix Contact Terminal Blocks

Product Details

• Permissible humidity (storage/transport)
  30 % ... 70 %
• Potentials
  1
• Maximum power dissipation for nominal condition
  1.02 W
• Overvoltage category
  III
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Tensile test result
  Test passed
• Result of tight fit on support
  Test passed
• Test specification, oscillation, broadband noise
  IEC 61373:2010-05
• Acceleration
  5g
• Shock duration
  30 ms
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Height NS 35/15
  54.8 mm
• Screw thread
  M3
• Tightening torque max
  0.8 Nm
• Min. AWG conductor cross section, flexible
  20
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
• 2 conductors with same cross section, stranded max.
  1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Nominal cross section
4 mm²
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Maximum load current
10 A
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Conductor cross section short circuit testing
1.5 mm²
Short circuit stability result
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
IEC 61373:2010-05
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
45.5 mm
Connection method
Screw connection
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Max. AWG conductor cross section, flexible
12
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.5 mm²
Number of connections
2
Insulating material
PA
Open side panel
Yes
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
0.18 kA
ASD level
0.964 (m/s2)2/Hz
Shock test result
Test passed
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
6.2 mm
Stripping length
9 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Number of positions
1
Color
gray
Rated surge voltage
6 kV
Degree of pollution
3
Nominal voltage UN
500 V
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 32/NS 35
Setpoint
1 N
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
46.1 mm
Height NS 32
52.3 mm
Tightening torque, min
0.6 Nm
Conductor cross section solid max.
6 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, solid min.
0.5 mm²
Number of levels
1
Flammability rating according to UL 94
V0
Nominal current IN
10 A
Finger protection
guaranteed
Bending test rotation speed
10 rpm
China RoHS
Environmentally Friendly Use Period = 50 years
Result of thermal test
Test passed
ECLASS 5.1
27141100
ECLASS 6.0
27141100
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
REACh SVHC
Lead 7439-92-1
ECLASS 7.0
27141126
UNSPSC 20.0
39121410
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
47.3 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.5 mm²
Shock form
Half-sine
Conductor cross section AWG max.
10
ECLASS 10.0.1
27141126
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 6.0
EC000902
ETIM 7.0
EC000902
UNSPSC 19.0
39121410
Test frequency
5 - 150 Hz
ECLASS 11.0
27141126
ECLASS 5.0
27141100
ECLASS 9.0
27141126
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²