3244630 Phoenix Contact Terminal Blocks

3244630 Product Details

• ECLASS 5.0
  27141100
• ETIM 7.0
  EC000897
• Tightening torque, min
  25 Nm
• ETIM 6.0
  EC000897
• UNSPSC 20.0
  39121410
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Connection method
  Bolt connection
• Screw thread
  M16
• UNSPSC 13.2
  39121410
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Pitch
  54.8 mm
• Cable lug connection according to standard
  DIN 46235:1983-07
• Hole diameter, min.
  17 mm
• Tightening torque max
  35 Nm
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 4.1
  27141100
• ECLASS 7.0
  27141120
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  16.22 W
Nominal current IN
520 A
Shock form
Half-sine
Number of positions
1
Nominal cross section
300 mm²
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
36 kA
Acceleration
5g
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Max. cross section for cable lug connection
300 mm²
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Potentials
1
Degree of pollution
3
Open side panel
No
Conductor cross section short circuit testing
300 mm²
Connection in acc. with standard
CSA
AWG min
4
Ambient temperature (assembly)
-5 °C ... 70 °C
Insulating material group
I
Number of levels
1
Color
gray
Area of application
Railway industry
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Maximum load current
520 A (At a conductor cross section of 300 mm²)
Short circuit stability result
Test passed
Min. cross section for cable lug connection
25 mm²
AWG max
600 kcmil
Number of connections
2
Overvoltage category
III
Nominal voltage UN
1000 V
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
UNSPSC 19.0
39121410
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
99.3 mm
Connection
1 level
Bolt diameter
16 mm
Cable lug width, max.
48 mm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
Result of voltage-drop test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Setpoint
20 N
Result of temperature-rise test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Shock duration
30 ms
Height NS 35/7,5
91.8 mm
Result of power-frequency withstand voltage test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
1.857 (m/s2)2/Hz
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Test spectrum
Service life test category 1, class B, body mounted
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
54.8 mm
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Shock test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Length
164 mm
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Result of thermal test
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed

Product condition