3214686 Phoenix Contact Terminal Blocks

Product Details

• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  0.56 W (the value is multiplied when connecting multiple levels)
• Open side panel
  Yes
• Finger protection
  guaranteed
• Checking the mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
• Result of temperature-rise test
  Test passed
• Number of connections
  4
• Insulating material
  PA
• Overvoltage category
  III
• Maximum load current
  16 A (The maximum load current must not be exceeded by the total current of all connected conductors.)
• Result of surge voltage test
  Test passed
• Bending test turns
  135
• Conductor cross section tensile test
  1.5 mm²
• Requirements, voltage drop
  ≤ 3.2 mV
• Conductor cross section short circuit testing
  1.5 mm²
• Short-time current
  0.18 kA
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock form
  Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
55.7 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm² Using the AI-S 1-8 TQ ferrule, Order No. 1200293, is recommended
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
Connection in acc. with standard
CSA
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Setpoint
1 N
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Color
gray
Insulating material group
I
Nominal voltage UN
500 V
Surge voltage test setpoint
7.3 kV
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tractive force setpoint
40 N
Result of voltage-drop test
Test passed
Tight fit on carrier
NS 35
Ageing test for screwless modular terminal block temperature cycles
192
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
78.8 mm
Width
3.5 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Stripping length
8 mm ... 10 mm
Internal cylindrical gage
A1 / B1
ECLASS 5.1
27141100
ECLASS 7.0
27141120
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
UNSPSC 11
39121410
Number of levels
2
Nominal cross section
1.5 mm²
Rated surge voltage
6 kV
Nominal current IN
16 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Acceleration
30g
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
End cover width
2.2 mm
Connection method
Push-in connection
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
48.2 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
ECLASS 11.0
27141120
ECLASS 4.1
27141100
ECLASS 4.0
27141100
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
UNSPSC 19.0
39121410