3214666 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  2
• Overvoltage category
  III
• Connection in acc. with standard
  IEC 60947-7-1
• Open side panel
  Yes
• Finger protection
  guaranteed
• Bending test rotation speed
  10 rpm
• Tractive force setpoint
  40 N
• Result of temperature-rise test
  Test passed
• Conductor cross section short circuit testing
  1.5 mm²
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock test result
  Test passed
• Shock duration
  18 ms
• ECLASS 5.0
  27141100
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Width
  3.5 mm
• Nominal cross section
  1.5 mm²
• Insulating material group
  I
• Maximum load current
  16 A
• Result of surge voltage test
  Test passed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Conductor cross section tensile test
1.5 mm²
Result of voltage-drop test
Test passed
Result of aging test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
48.2 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
ECLASS 11.0
27141120
ECLASS 9.0
27141120
Number of connections
4
Insulating material
PA
Rated surge voltage
6 kV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Surge voltage test setpoint
7.3 kV
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Setpoint
1 N
Requirements, voltage drop
≤ 3.2 mV
Short-time current
0.18 kA
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Number of shocks per direction
3
Color
green/orange
Nominal current IN
16 A
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.56 W (the value is multiplied when connecting multiple levels)
Nominal voltage UN
500 V
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Tight fit on carrier
NS 35
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section AWG min.
26
Conductor cross section flexible max.
1.5 mm²
ECLASS 10.0.1
27141120
ECLASS 4.0
27141100
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Shock form
Half-sine
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
55.7 mm
Conductor cross section solid max.
1.5 mm²
Connection method
Push-in connection
Stripping length
8 mm
Internal cylindrical gage
A1 / B1
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ETIM 6.0
EC000897
ETIM 7.0
EC000897
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
ECLASS 7.0
27141120
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
End cover width
2.2 mm
Length
78.8 mm
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm² Using the AI-S 1-8 TQ ferrule, Order No. 1200293, is recommended
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410