3214657 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  2
• Color
  gray
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Maximum load current
  16 A
• Test duration per axis
  5 h
• Connection in acc. with standard
  CSA
• Open side panel
  Yes
• Result of surge voltage test
  Test passed
• Checking the mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Tight fit on carrier
  NS 35
• Result of aging test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Number of connections
  4
• Rated surge voltage
  6 kV
• Insulating material group
  I
• Nominal cross section
  1.5 mm²
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  0.56 W (the value is multiplied when connecting multiple levels)
Nominal voltage UN
500 V
Back of the hand protection
guaranteed
Surge voltage test setpoint
7.3 kV
Bending test rotation speed
10 rpm
Tractive force setpoint
40 N
Result of voltage-drop test
Test passed
Short-time current
0.18 kA
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
55.7 mm
Conductor cross section AWG min.
26
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
UNSPSC 12.01
39121410
Conductor cross section tensile test
1.5 mm²
Setpoint
1 N
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
3.5 mm
Connection method
Push-in connection
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Stripping length
8 mm ... 10 mm
ECLASS 11.0
27141120
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Nominal current IN
16 A
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Requirements, voltage drop
≤ 3.2 mV
Conductor cross section short circuit testing
1.5 mm²
Result of thermal test
Test passed
Acceleration
30g
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
78.8 mm
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ECLASS 9.0
27141120
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
48.2 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm² Using the AI-S 1-8 TQ ferrule, Order No. 1200293, is recommended
ECLASS 5.0
27141100
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Internal cylindrical gage
A1 / B1
ECLASS 4.0
27141100
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410