3214262 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  6
• Rated surge voltage
  6 kV
• Maximum power dissipation for nominal condition
  0.77 W (the value is multiplied when connecting multiple levels)
• Maximum load current
  24 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Nominal cross section
  2.5 mm²
• Area of application
  Railway industry
• Nominal current IN
  19 A (with a 2.5 mm² conductor cross section)
• Result of surge voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Tight fit on carrier
  NS 32/NS 35
• Conductor cross section short circuit testing
  2.5 mm²
• Test spectrum
  Service life test category 2, bogie-mounted
• Acceleration
  30g
• Number of shocks per direction
  3
• Number of levels
  3
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Nominal voltage UN
  500 V
Finger protection
guaranteed
Bending test turns
135
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Width
5.2 mm
Height NS 35/7,5
77.5 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Stripping length
9 mm
Screw thread
M3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Color
gray
Degree of pollution
3
Connection in acc. with standard
CSA
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
90 mm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ETIM 3.0
EC000897
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Insulating material
PA
Overvoltage category
III
Open side panel
Yes
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Short-time current
0.3 kA
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Connection method
Screw connection
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Internal cylindrical gage
A3
Tightening torque max
0.6 Nm
ECLASS 10.0.1
27141120
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
85 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
2 conductors with same cross section, solid min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Tightening torque, min
0.5 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ECLASS 7.0
27141120
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410