3214082 Phoenix Contact Terminal Blocks

Product Details

• Bending test turns
  135
• Color
  black/yellow
• Degree of pollution
  2
• Maximum power dissipation for nominal condition
  4.06 W (the value is multiplied when connecting multiple levels)
• Maximum load current
  41 A
• Open side panel
  No
• Surge voltage test setpoint
  9.8 kV
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Number of connections
  11
• Insulating material
  PA
• Insulating material group
  I
• Nominal voltage UN
  1000 V
• Power frequency withstand voltage setpoint
  2.2 kV
• Result of surge voltage test
  Test passed
• Bending test conductor cross section/weight
  1.5 mm² / 0.4 kg
• Setpoint
  10 N
• Requirements, voltage drop
  ≤ 1.6 mV
• Result of aging test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Acceleration
  30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
48.8 mm
ECLASS 10.0.1
27141120
Note
In the end application, the applicable safety regulations for overload and short-circuit protection on the connected conductors must be considered.
Overvoltage category
III
Connection method
Push-in connection
Nominal current IN
41 A
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Tractive force setpoint
20 N
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
50 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Number of levels
1
Flammability rating according to UL 94
V0
Connection in acc. with standard
IEC 60947-7-1
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Conductor cross section tensile test
0.5 mm²
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Short-time current
4.8 kA
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Tightening torque max
3.7 Nm
Two conductors with the same cross section, AWG stranded, max.
8
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
Shock test result
Test passed
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Tightening torque, min
3.2 Nm
ECLASS 7.0
27141120
ETIM 6.0
EC000897
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, AWG solid min.
16
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
ECLASS 5.1
27141111
2 conductors with same cross section, solid max.
16 mm²
2 conductors with same cross section, stranded max.
10 mm²
2 conductors with same cross section, solid min.
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 9.0
27141120
UNSPSC 11
39121411
UNSPSC 21.0
39121410
ETIM 4.0
EC000897
UNSPSC 19.0
39121410
UNSPSC 6.01
30211812
ECLASS 4.0
27141127
UNSPSC 12.01
39121411
UNSPSC 20.0
39121410
Tensile test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Tight fit on carrier
NS 35
Test duration per axis
5 h
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Two conductors with the same cross section, AWG stranded, min.
16
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
UNSPSC 13.2
39121411
Number of shocks per direction
3
Screw thread
M6
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141127
ECLASS 6.0
27141100
Height NS 35/15
56.3 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Oscillation, broadband noise test result
Test passed
Shock form
Half-sine
Width
16.3 mm
Length
110.4 mm
Stripping length
8 mm ... 10 mm
Min. AWG conductor cross section, flexible
26
2 conductors with same cross section, stranded min.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
10 mm²
Internal cylindrical gage
B9
ECLASS 5.0
27141127
ETIM 3.0
EC000897
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ETIM 7.0
EC000897
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
14
Two conductors with the same cross section, AWG solid max.
6
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
1.5 mm²
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Short circuit stability result
Test passed
Result of thermal test
Test passed
Conductor cross section solid min.
0.34 mm²