3214048 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  5
• Insulating material
  PA
• Overvoltage category
  III
• Potentials
  2
• Insulating material group
  I
• Nominal voltage UN
  400 V
• Result of power-frequency withstand voltage test
  Test passed
• Nominal cross section
  4 mm²
• Rated surge voltage
  6 kV
• Maximum load current
  32 A (with 6 mm² conductor cross section)
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Bending test rotation speed
  10 rpm
• Result of voltage-drop test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Acceleration
  30g
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Stripping length
10 mm ... 12 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
Number of levels
3
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Nominal current IN
28 A (with 4 mm² conductor cross section)
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
58 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141125
ECLASS 5.1
27141100
ETIM 6.0
EC001329
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Color
gray
Degree of pollution
3
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection
1st, 2nd and 3rd level
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Value
0.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ECLASS 9.0
27141125
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Open side panel
Yes
Result of surge voltage test
Test passed
Bending test turns
135
Conductor cross section short circuit testing
6 mm²
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
114 mm
Connection method
Push-in connection
Conductor cross section AWG min.
24
Max. AWG conductor cross section, flexible
10
Connection cross sections directly pluggable
0.5 mm² 6 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141125
ECLASS 5.0
27141100
ETIM 3.0
EC001329
ETIM 7.0
EC001329
UNSPSC 19.0
39121410
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Short circuit stability result
Test passed
Short-time current
0.72 kA
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Shock duration
18 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
6.2 mm
Height NS 35/7,5
50.5 mm
Conductor cross section solid max.
6 mm²
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Internal cylindrical gage
A4
ECLASS 4.0
27141100
ECLASS 7.0
27141125
UNSPSC 11
39121410
ETIM 4.0
EC001329
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410