3214025 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  2.43 W
• Open side panel
  Yes
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of tight fit on support
  Test passed
• Tight fit on carrier
  NS 35
• Short-time current
  1.92 kA
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Nominal cross section
  16 mm²
• Rated surge voltage
  6 kV
• Degree of pollution
  3
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  1.89 kV
• Setpoint
  5 N
Short circuit stability result
Test passed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
0.964 (m/s2)2/Hz
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Width
10.2 mm
End cover width
2.2 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
4
Note
Assembly instructions:For secure fastening of the neutral busbar, supports must be set at the beginning and end of each terminal strip as well as every 20 cm on longer terminal strips.
Color
blue
Maximum load current
68 A (with 16 mm² conductor cross section)
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection
1 level
Conductor cross section solid max.
16 mm²
Conductor cross section flexible max.
16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ETIM 6.0
EC001329
UNSPSC 11
39121410
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Number of connections
2
Insulating material
PA
Insulating material group
I
Nominal current IN
68 A
Back of the hand protection
guaranteed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
16 mm²
Result of aging test
Test passed
Acceleration
5g
Shock test result
Test passed
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
49.6 mm
Height NS 35/15
58.6 mm
Conductor cross section solid min.
1 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
Connection cross sections directly pluggable
1 mm² 16 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141125
ECLASS 6.0
27141100
ETIM 3.0
EC001329
UNSPSC 18.0
39121410
Number of levels
1
Overvoltage category
III
Nominal voltage UN
500 V
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test turns
135
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 1, class B, body mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
30 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
77.7 mm
Connection method
Push-in connection
Conductor cross section AWG min.
24
Max. AWG conductor cross section, flexible
4
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
1.5 mm²
Internal cylindrical gage
A7
ECLASS 4.0
27141100
ECLASS 9.0
27141125
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Height NS 35/7,5
51.1 mm
Stripping length
18 mm
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141125
ECLASS 4.1
27141100
ECLASS 7.0
27141125
ETIM 7.0
EC001329
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
16 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.1
27141100
ETIM 4.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410